BARREL TEMPERATURES ENGLISH (°F) METRIC (°C) COMMENTS Zone 1 - Rear 410°F 450°F 210°C 230°C If smoking starts to occur, purge machine immediately and reduce mold and barrel temperatures. DRYING CONDITIONS ENGLISH (°F) METRIC (°C) Temperature 180°F 80°C Duration 2–4 Hours Moisture Level Allowable 0.05%–0.20% PROCESSING Screw Speed Typical screw speeds are recommended Injection Velocity 1–3 inch per second Back Pressure Lower back pressure is recommended Pack Pressure 60–80% of max injection pressure Hold Pressure 40–60% of max injection pressure Cool Time 10–30 seconds (depends on part geometry and dimensional stability) Residence Time Longer residence times are not advised 1.844.4AVIENT www.avient.com Copyright © 2021, Avient Corporation. Avient makes no warranties or guarantees respecting suitability of either Avient’s products or the information for your process or end-use application.

With a focus upon sustainability Avient has focused its additive technology development on mono-layer PET. Consequentially many brand owners are already looking to reduce the inorganic content in their packaging to Avient makes no warranties or guarantees respecting suitability of either Avient’s products or the information for your process or end-use application.

View PDF The SQS herewith attests that the organisation named below has a management system that meets the requirements of the normative base mentioned. 70 01 _1 /A pr il 20 22 /V er si on 2 .0 Certificate Avient Colorants Germany GmbH Kornkamp 50 22926 Ahrensburg Germany Scope Production of Color- and Additives Concentrates, Compounds and Foaming Agents Normative base ISO 50001:2018 Energy Management System Reg. no. 46090 Page 1 of 1 Validity 20. 01. 2024  – 19. 01. 2027 Issue 20. 01. 2024  A.Grisard, President SQS F.

CERTIFICATE Signed for the certification body: Eric Louys Chairman Certification Committee CERTIFICATE EN ISO 50001 : 2018 Energy Management System VINÇOTTE nv Jan Olieslagerslaan 35, 1800 Vilvoorde, Belgium This is to certify that Avient Located at Rue Melville Wilson 2 5330 Assesse Belgium has established and maintains an energy management system according the requirements of EN ISO 50001 : 2018 “Energy Management System” for: Design and manufacture of colour and additive concentrates, thermoplastic resins and speciality compounds This certificate is based on the result of an energy audit documented in the audit report 61231731. Certificate number: 24 EN 47 Valid from 1 February 2024 to 31 January 2027 Further clarifications regarding the scope of this certificate and the applicability of EN ISO 50001 : 2018 requirements may be obtained by consulting the organization. This certificate is granted during the Certification Commission of 1 February 2024 and is subject to the General Regulations of VINÇOTTE nv.

Avient Announces Quarterly Dividend... Avient Board of Directors Appoints Ashish K. Avient Announces First Quarter 2025 Results...

Certificate Number: 255 ISO2P Date First Registered: 03/04/2023 Issued on: 11/04/2023 Valid until: 10/04/2026 Awarded to AVIENT PAKISTAN (PVT) LTD 1A/1, Sector#20, Korangi Industrial Area, Sector 20 Karachi, Pakistan In recognition of the Organization´s Food Safety Management System which complies with : ISO 22000:2018 Food Category : I For the scope of activities described below: Manufacturing & Processing of Polymer Resins & Master batch F-3/22/ A 100 Issue date : 06/2022 Version:03 It is mandatory to carry out the surveillance audit on its time.

EXCELITE CAN ENABLE ENHANCED PRODUCTION QUALITY Avient’s ColorMatrix metering equipment is highly accurate and delivers Excelite additives directly into the extruder/molder feed throat. Avient makes no warranties or guarantees respecting suitability of either Avient’s products or the information for your process or end-use application. AVIENT MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, either with respect to the information or products reflected by the information.

January 1, 2020 Investor Relations Contact: Joe Di Salvo, Vice President, Investor Relations, PolyOne Corporation, +1 440-930-1921, giuseppe.disalvo@avient.com; Media Contact: Kyle G. Rose, Vice President, Corporate Communications, PolyOne Corporation, +1 440-930-3162, kyle.rose@avient.com

Contact Avient to tap into our material science expertise and comprehensive product development support services to help you bring your ideas to market faster. www.avient.com Copyright © 2020, Avient Corporation. Avient makes no warranties or guarantees respecting suitability of either Avient’s products or the information for your process or end-use application.

LubriOne Internally Lubricated Formulations PTFE Free Series Product Bulletin_CN 4.19-1 LubriOne™自润滑配方是一种自润滑聚合物， 摩擦系数（COF）较低，可赋予成型零件更好 的耐磨性能。