Wir dulden kein mündliches oder körperliches Verhalten, das eine andere Person herabwürdigt, in unangemessener Weise die Arbeitsleistung einer anderen Person beeinträchtigt oder eine angsteinflößende, feindliche oder anstößige Arbeitsumgebung schafft. Avient und unser Personal geben Sicherheit oberste Priorität und tragen zur Verbesserung der Gemeinschaften, in denen wir tätig sind, bei. Fragen Sie Ihren Vorgesetzten oder eine sonstige erfahrene Person um Rat.

A M E R I C A & A S I A • Eliminate voids in plastic that create quality issues • Reduce high scrap rates due to sink marks • Improve low strength-to-weight ratio due to voids • Reduce long cycle times • Run more fractional melt / low melt flow resins • Improved cell structure and physical properties • Removed sink marks to reduce scrap rates • Improved gas retention when used with N2 physical foam • Reduced short shots for lower scrap rates • Improved melt flow and created a more controllable foaming process • Provided greater ability to process low melt flow resins Excelite™ IM Chemical Foaming Additives KEY REQUIREMENTS* WHY AVIENT?

Para actuar con integridad personal, cada uno de nosotros debe ser ejemplo de estos valores en nuestra conducta personal. Privacidad, información personal y protección de datos Todos tenemos la responsabilidad de proteger la información personal de nuestros compañeros de trabajo, clientes, proveedores y otras personas con quienes hacemos negocios. Nuestra integridad personal es el fundamento de la reputación de Avient y la integridad infunde credibilidad.

Buyer shall be obliged to accept the Products and pay the rate specified in the order confirmation for the quantity of Products delivered by Seller. Buyer shall disseminate such information so as to give warning of possible hazards to persons whom Buyer can reasonably foresee may receive exposure to such hazards, including, but not limited to, Buyer’s employees, agents, contractors and customers. Seller shall have the right to terminate an order confirmation with immediate effect if at any time prior to delivery, a person or group of persons who are unrelated to the persons controlling Buyer as of the date of the order confirmation, acquires control, through ownership of voting securities or otherwise, over Buyer.

GUIDELINES FOR USING CESA CLEAN ADDITIVES • Cesa Clean works best when molded maintaining normal (injection) pressure/shear • For best results, Avient recommends a “Running Color Change” which eliminates breaks in the molding cycle • Since the Cesa Clean concentrate will expand, it is recommended to reduce the shot size by 20% • It is designed for use at a let-down ratio (LDR) of 3.0% or (33:1); however, use rate can vary depending on the severity of the contamination but typically is 2.0–4.0% (a use rate higher than 6.0% may not have any positive affect on the cleaning performance) • Using Cesa Clean as a routine part of your color change rotation will allow faster changes and consume a minimal amount of raw material - Note: If the manifold is not cleaned routinely, this process may be more time consuming and additional material will be required • It is best to process at your normal polymer processing temperatures - For best performance, stock temperature should be at least 400°F - If 400°F is achieved during the purging process, no additional activation will occur during the reprocessing of regrind - All parts produced during the “Running Purge Cycle” should be captured as regrind, resulting in a scrap-free color change - If using sequential gates, open and close all gates at the same time while purging the tool - If contamination appears to be coming from one gate, open and close first, and for an extended period of time, to force more material through this location - When cleaning in this manner, pay close attention to shot size - Parts containing the previous or new color plus any Cesa Clean can be used as regrind INTRODUCING CESA CLEAN TO YOUR PROCESS Hand Blend • Hand weigh enough of the Cesa Clean and natural resin mix to equate to 3–5 times the barrel capacity • Use rate should be 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • Note: Do not attempt to vacuum load more than 15 feet from source as stratification/separation may occur Volumetric Feeder • Calibrate feeder to dispense 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • This style of feeder is highly recommended for at-the-throat metering of Cesa Clean Blending Units Most blenders have an extra bin for an additive • Fill the additive bin with Cesa Clean • Set blender to introduce the Cesa Clean at 2.0 to 4.0% • Note: Do not air convey any further than 15 feet as Cesa Clean has a high density and may separate from the mix. GETTING STARTED TIMING IS THE KEY TO A RUNNING COLOR CHANGE Hand Blend • Have the purge blend ready to load • If hopper contains a mixture of resin, color and/ or regrind, it should be run dry or drained before beginning the color change, keeping the screw full so press cycle continues • Run the main resin hopper dry or shut off hopper to hand feed at the throat • Once press is clean, slide hopper in place and proceed with next color-resin blend • The next color can be added while Cesa Clean is still in the barrel • When splay is no longer visible in parts, reset shot size, parts should be ready to pack (Single) Volumetric/Gravimetric Metering Unit at the Throat • Empty and clean feeder while press continues to run • Add Cesa Clean to the feeder color hopper and calibrate to a 3.0% use rate • When press is clean, start next color • When splay is no longer visible in parts, reset shot size, parts should be ready to pack • Note: If an open/unused secondary feeder is installed, use it for the Cesa Clean concentrate Central Blending Unit • Thoroughly clean unit while continuing to mold parts, keeping a resin feed to the press • Using a clean open hopper or regrind hopper, add the Cesa Clean concentrate • Set blender for additive/color to 3.0% • Once press is clean, drain hopper and/or central blending unit while continuing to mold parts • Begin new color and continue to mold parts • When splay is no longer visible in parts, reset shot size, parts should be ready to pack Process Adjustments That Can Help • Increase back pressure • Increase screw speed • Increase injection speed (in some tools maximum injection speed can facilitate cleaning) • Reduce mold close time (faster cycle) • Always remember a stock temperature of 400°F is essential When press and tool are clean, return all settings to standard production process profile.

Our range includes both standard and custom solutions that comply with UL 94 V-2, V-0, and 5VA ratings, with many grades offer high Relative Thermal Index (RTI) ratings and a Glow Wire Flammability Index (GWFI) up to 960°C. UL 94 V-2, V-0, and 5VA ratings • Elevated RTI ratings and GWFI (IEC 60695-11-10) up to 960°C • Injection molding and extrusion grades • Low dielectric performance with selected formulations • Good recyclability • Colorable KEY CHARACTERISTICS

Increase injection rate 4. Increase injection rate 3. Increase injection rate 3.

HANDLING AND USAGE RATES Triple A is a dispersion which can be supplied individually or in combination with other ColorMatrix colorant and additive technologies. ColorMatrix will recommend the best use rate depending on the expected level of AA following processing, storage conditions and the final desired AA level in the packaged product. This additive technology can be implemented during PET processing without impact on production efficiency. 0 10 20 30 40 50 60 70 80 0.050 0.1 0.15 0.2 % A A R ed uc ti on % Use Rate Anthranilamide 0 10 20 30 40 50 60 70 80 90 .04 .06 .08.020 0.1 0.16 0.180.140.12 0.2 % A A R ed uc ti on % Triple A-1+ 1.844.4AVIENT www.avient.com Copyright © 2022, Avient Corporation.

It is the responsibility of each person at Avient, including contractors, suppliers, and visitors, to follow all security procedures, to remain aware of and report all possible security threats, to remain committed to working in a secure and safe manner, and to be prepared to respond to emergencies safely and effectively.

It is the responsibility of each person at Avient to ensure that all operations in the company are carried out in accordance with this policy.