Figure 3 shows the flexural test results with a convincing advantage in terms of stiffness correlation for the Digimat anisotropic modelling approach over the conventional isotropic modelling approach. Figure 1: Tensile test data as a function of the fibre orientation 0° (orange), 45° (green), 90° (blue) https://www.hexagonmi.com Figure 4: Failure location in the flexural test for the isotropic modelling Figure 6: Failure location in the tensile test for the isotropic modelling approach (left), Digimat anisotropic modelling approach (middle) and reality (right) Figure 3: Flexural test results with the isotropic modelling approach (orange) and Digimat anisotropic modelling approach (green) Figure 5: Tensile test results with the isotropic modelling approach (orange) and Digimat anisotropic modelling approach (green) Figure 5 shows the tensile test results with, again, a convincing advantage for the Digimat anisotropic modelling approach against the isotropic modelling approach.

INDUSTRY BULLETIN STANDARD UNITS ONFLEX LO 7120-45N Volatile Organic Compounds VDA 278 ug/g(ppm) 41 Fogging VDA 278 ug/g(ppm) 521 Odor • Control • Dry conditions • Wet conditions SAE J1351 (15) 1-10 Scale 1 2 1 Compression Set (23°C) • 22 hours • 70 hours ASTM D395 % 14.4 14.6 Capillary Viscosity • 1341/s • 11170/s ASTM D3835 Pa*s 35 7 HVAC SYSTEMS OnFlex™ LO • Features: low VOC/FOG, low odor, good compression set, easy processing, overmolds to polypropylene • Example applications: seals and flaps in heating, ventilation and air conditioning systems CHARACTERISTICS ONFLEX ™ LO ONFLEX™ AF TPE GENERAL PURPOSE TPV TPO Volatile Organic Compounds (VDA 278) Very Low Moderate Moderate Moderate Very Low Fogging (VDA 278 & DIN 75201) Very Low Moderate Moderate High Very Low Odor (VDA 270 Requirement ≤3.0) ≤3.0 ≤3.0 >3 >3 ≤3.0 Gloss Level Low Low Low Very Low High Tactile Feel Grippy Grippy Grippy Grippy Waxy Pre-Drying Required No No No Yes No Raw Material Costs $$ $$ $$ $$$ $ Compression Set @ RT Good Good Good Excellent N/A Compression Set @ ≥70°C Moderate Moderate Moderate Good N/A UV Resistance Good Excellent Good Good Good Weatherability Good Excellent Good Good Good Hardness Range Low to High Low to High Low to High Low to High High Density (g/ml) 1.15 0.99 0.90–1.20 0.95–0.98 0.90–1.20 GENERAL CHARACTERISTICS COMPARING TPE, TPV, TPO Grades shown on both pages are representative of solutions manufactured in North America, more grades available globally.

HIGHLIGHTS • 33 most popular industry colors • Flexible cure profile (266°F/130°C to 320°F/160°C) • Excellent opacity • Wet-on-wet printing • Matte finish* • ECO PASSPORT by OEKO-TEX® and ZDHC MRSL Conformance Level 3 certifications** * Gloss may increase when cured at temperatures above 266°F (130°C) ** To learn about compliance standards applicable to specifics inks, please contact your Avient Specialty Inks distributor. For more information about Wilflex screen printing inks, please call 1.844.4AVIENT, email askspecialtyinks@avient.com or visit www.avientspecialtyinks.com or www.wilflex.com www.wilflex.com Yellow Swatch: Yellow: 1655 Swatch: 1655: 1795 Swatch: 1795: 2685 Swatch: 2685: 1235 Swatch: 1235: 116 Swatch: 116: Bright Red Swatch: Bright Red: 3546 Swatch: 3546: 7645 Swatch: 7645: 137 Swatch: 137: 1807 Swatch: 1807: 227 Swatch: 227: 1788 Swatch: 1788: 2397 Swatch: 2397: 2925 Swatch: 2925: 2768 Swatch: 2768: 805 Swatch: 805: 156 Swatch: 156: 3435 Swatch: 3435: 7488 Swatch: 7488: 287 Swatch: 287: 253 Swatch: 253: 296 Swatch: 296: 2145 Swatch: 2145: 806 Swatch: 806: 421 Swatch: 421: 348 Swatch: 348: 3005 Swatch: 3005: 809 Swatch: 809: 423 Swatch: 423: 2422 Swatch: 2422: 811 Swatch: 811: Black Diamond Swatch: PMS Black 3 C:

Expedited 2 and 3 apply to over the counter filings only. The fees are as follows: Expedite 1 $100 2 Business Days Expedite 2 $200 1 Business Day Expedite 3 $300 4 Business Hours 2.

Specific Gravity Color Index Heat Stability (F) Light- fastness Carrier White HC Plus-35000 Titanium Dioxide 60 1.78 White 6 Above 400° I/O LSR HC Plus-35100 Titanium Dioxide 75 2.31 White 6 Above 400° I/O HCR Yellow HC Plus-35011 Benzimidazolone Yellow 10 1.01 Yellow 180 350°–400° I/O (MASS) LSR HC Plus-35111 Benzimidazolone Yellow 24 1.49 Yellow 180 350°–400° I/O (MASS) HCR Orange HC Plus-35020 Monoazo Orange 10 1.02 Orange 64 350°–400° I/O LSR HC Plus-35120 Monoazo Orange 25 1.19 Orange 64 350°–400° I/O HCR Red HC Plus-35032 Red Iron Oxide VYS 50 1.60 Red 101 Above 400° I/O LSR HC Plus-35132 Red Iron Oxide VYS 70 2.17 Red 101 Above 400° I/O HCR HC Plus-35031 Special Azoic 15 1.03 Red 187 350°–400° I/O LSR HC Plus-35131 Special Azoic 33 1.33 Red 187 350°–400° I/O HCR Blue HC Plus-35040 3 Phthalocyanine Blue GS 25 1.07 Blue 15 Above 400° I/O LSR HC Plus-35140 3 Phthalocyanine Blue GS 40 1.42 Blue 15 Above 400° I/O HCR HC Plus-35041 Ultramarine Blue 45 1.32 Blue 29 Above 400° I/O LSR HC Plus-35141 Ultramarine Blue 60 1.51 Blue 29 Above 400° I/O HCR Green HC Plus-35050 Phthalocyanine Green 25 1.13 Green 7 Above 400° I/O LSR HC Plus-35150 Phthalocyanine Green 40 1.71 Green 7 Above 400° I/O HCR Violet HC Plus-35033 Quinacridone Red 20 1.04 Violet 19 Above 400° I/O LSR HC Plus-35130 Quinacridone Red 40 1.40 Violet 19 Above 400° I/O HCR Brown HC Plus-35070 Yellow Inorganic - Cr/Sb/Ti Oxide 30 1.26 Brown 24 Above 400° I/O LSR HC Plus-35170 Yellow Inorganic - Cr/Sb/Ti Oxide 60 1.79 Brown 24 Above 400° I/O HCR Black HC Plus-35080 Carbon Black 12 1.03 Black 7 Above 400° I/O LSR HC Plus-35180 Carbon Black 30 1.14 Black 7 Above 400° I/O HCR Copyright © 2024, Avient Corporation.

Specific Gravity Color Index Heat Stability (F) Light- fastness Carrier White HC Plus-35000 Titanium Dioxide 60 1.78 White 6 Above 400° I/O LSR HC Plus-35100 Titanium Dioxide 75 2.31 White 6 Above 400° I/O HCR Yellow HC Plus-35011 Benzimidazolone Yellow 10 1.01 Yellow 180 350°–400° I/O (MASS) LSR HC Plus-35111 Benzimidazolone Yellow 24 1.49 Yellow 180 350°–400° I/O (MASS) HCR Orange HC Plus-35020 Monoazo Orange 10 1.02 Orange 64 350°–400° I/O LSR HC Plus-35120 Monoazo Orange 25 1.19 Orange 64 350°–400° I/O HCR Red HC Plus-35032 Red Iron Oxide VYS 50 1.60 Red 101 Above 400° I/O LSR HC Plus-35132 Red Iron Oxide VYS 70 2.17 Red 101 Above 400° I/O HCR HC Plus-35031 Special Azoic 15 1.03 Red 187 350°–400° I/O LSR HC Plus-35131 Special Azoic 33 1.33 Red 187 350°–400° I/O HCR Blue HC Plus-35040 3 Phthalocyanine Blue GS 25 1.07 Blue 15 Above 400° I/O LSR HC Plus-35140 3 Phthalocyanine Blue GS 40 1.42 Blue 15 Above 400° I/O HCR HC Plus-35041 Ultramarine Blue 45 1.32 Blue 29 Above 400° I/O LSR HC Plus-35141 Ultramarine Blue 60 1.51 Blue 29 Above 400° I/O HCR Green HC Plus-35050 Phthalocyanine Green 25 1.13 Green 7 Above 400° I/O LSR HC Plus-35150 Phthalocyanine Green 40 1.71 Green 7 Above 400° I/O HCR Violet HC Plus-35033 Quinacridone Red 20 1.04 Violet 19 Above 400° I/O LSR HC Plus-35130 Quinacridone Red 40 1.40 Violet 19 Above 400° I/O HCR Brown HC Plus-35070 Yellow Inorganic - Cr/Sb/Ti Oxide 30 1.26 Brown 24 Above 400° I/O LSR HC Plus-35170 Yellow Inorganic - Cr/Sb/Ti Oxide 60 1.79 Brown 24 Above 400° I/O HCR Black HC Plus-35080 Carbon Black 12 1.03 Black 7 Above 400° I/O LSR HC Plus-35180 Carbon Black 30 1.14 Black 7 Above 400° I/O HCR Copyright © 2024, Avient Corporation.

Gasoline - 30% glass-filled (GF) grade, dry as molded (DAM), room temperature Testing methodology is an adaptation from ASTM D543 • Reapply freshly soaked gauze pad every 24 hours to prevent from drying out • Repeat for a total of 72 hours • Tensile properties recorded *Chemical resistance data for DEET, motor oil, glass cleaner, and sunscreen available upon request KEY CHARACTERISTICS Figure 1 Figure 2 3.34 3.84 3.63 1.96 2.21 0.99 3.43 3.86 3.93 1.76 3.49 2.01 3.26 3.66 3.74 1.45 1.06 0.989 2.98 3.99 3.41 1.41 1.07 0.88 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 30% LGF PKE 30% LGF PA6 30% LGF PA66 30% SGF PKE 30% SGF PA6 30% SGF PA66 Ft -lb /in Notched Izod Impact ASTM D256 23C DAM 23C Conditioned -40C DAM -40C Conditioned 1.47 1.37 1.37 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 Glass-Filled PKE Glass-Filled PA6 Glass-Filled PA66 g/ cm 3 Density of Polyketone vs Nylon ASTM D792 LESS MOISTURE ABSORPTION THAN NYLON 30% Short Glass Fiber (SGF) Comparison Moisture uptake, environmental chamber 62% RH, 70°C SIMILAR DENSITY TO NYLON ASTM D792 COMPARABLE AND CONSISTENT IMPACT PERFORMANCE* Notched Izod Impact (ASTM D256) of LGF and SGF for DAM and Conditioned Materials *3,000 hr weathering data available upon request KEY CHARACTERISTICS 1.844.4AVIENT www.avient.com Copyright © 2024, Avient Corporation.

Clause 1, Clause 2, Clause 3, Clause 6, Clause 7; ii. Updated 08/04/2022 3 b. Clause 3 Third-party beneficiaries a.

Zone 3 The screw rpm should be set so that the screw is fully recovered for the next shot, typically 2 - 3 seconds before the mold opens.

2 Omkoping van overheidsfunctionarissen 2 Commerciële omkoping 3 Faciliterende betalingen en smeergeld 3 Werken met vertegenwoordigers, distributeurs en andere derden 3 Due diligence- en goedkeuringsproces 3 Rode vlaggen 4 Vereisten op het gebied van boekhouding en administratie 4 Melden van mogelijke overtredingen 5 Ethische hotline van Avient 5 Bescherming tegen vergelding 5 Snelle verwijzing: ABAC WEL DOEN EN NIET DOEN 6 1 Ons internationale beleid tegen omkoping en corruptie Avient verbiedt ten strengste fraude, omkoping en andere corrupte bedrijfspraktijken bij al onze activiteiten overal ter wereld. Inhoudsopgave 3 Het identificeren van een overheidsfunctionaris kan vaak duidelijk zijn, maar niet altijd.