Avient’s portfolio of Gravi-Tech materials combine the aesthetics of metals with the superior processability of polypropylene (PP), acrylic butadiene styrene (ABS), polyamide (PA), polybutylene terephthalate (PBT), polyphenylene sulfide (PPS), and other thermoplastic materials.

ORANGE ACRYLIC #3

Copolyester, Polyester & PC/Polyester Blends Copolyester Eastman Tritan™ (Copolyester) High chemical resistance to a wide variety of hospital disinfectants; excellent toughness and impact resistance after disinfection; retains color and gloss after sterilization and disinfection; does not contain BPA, BPS or halogens Polybutylene Terephthalate (PBT) DuPont™ Crastin® & Rynite® (FR-PBT) 30% glass reinforced; flame retardant; good mold flow and electrical properties; high strength, stiffness, dimensional stability and heat resistance Polyester (PC/PET) & Polybutylene Terephthalate (PC/PBT) Covestro Makroblend® (FR-PC/PET) & (FR-PC/PBT) Strength; toughness; chemical resistance; flame retardant Covestro Makroblend® (Non-FR PC/PBT) Strength; toughness; chemical resistance; limited biocompatibility Trinseo EMERGE™ (FR-PC/PET) Chemical resistance; ignition resistance; limited biocompatibility PA, PVC, PC & PMMA Polyamide (Nylon, PA) Avient Trilliant™ XR Radiation Shielding (PA) Radiation shielding; green alternative for lead replacement; enhanced design freedom vs. lead; available in hard and soft durometers Arkema Rilsan® MED (PA11) & Rilsamid® MED (PA12) Chemical resistance; transparent and opaque; easy processing; creep resistance; temperature resistance; BPA-free; sterilizable by gamma, EtO and steam Polyvinyl Chloride GEON Performance Solutions Resilience™ HC (PVC) Excellent chemical resistance; good strength and stiffness; very good surface quality; inherently flame resistant; available in all medical colors; excellent solvent bonding to PVC Polycarbonate (PC) Trinseo EMERGE™ (PC) Ignition resistant; transparent and opaque; glass-filled also available PolyMethyl Methacrylate (PMMA) Trinseo Plexiglas® Acrylics (PMMA) Clarity; easy processing; chemical resistance; BPA free; ideal for light piping and lenses Styrenics & FR-PC/ABS Blends Styrenics Trinseo MAGNUM™ (ABS) Opaque; custom colors; excellent impact and flow; low residuals; full biocompatibility INEOS Styrolution Terlux® HD (MABS) Good clarity; good heat and overall chemical resistance; good impact strength; good solvent bonding to PVC; outstanding surface quality INEOS Styrolution Lustran® & Novodur® HD (ABS) Opaque appearance; outstanding chemical resistance; high impact strength; excellent balance of properties; ease of processability; bondable FR- Polycarbonate/ ABS (FR-PC/ABS) Covestro Bayblend® (FR-PC/ABS) Flame retardant; good impact resistance; dimensional stability; toughness Trinseo EMERGE™ (FR-PC/ABS) Ignition resistant; limited biocompatibility; high flow; easy processing; glass-filled also available RIGID COMPONENTS: DIAGNOSTIC, IMAGING, LIFE SUPPORT, LABORATORY, Applications include: • Housings • Covers • Monitor bezels • Body panels • Handles • Access panels • Battery enclosures • Wands • Coils Rigid Component Solution Needs: • Materials compliant with ISO 10993 & USP Class VI, if required • UL approved resins to meet flammability requirements • Housings with toughness & good impact resistance • Enclosures & components that withstand repeated cleanings • High-flow materials for components with complex designs FLEXIBLE COMPONENTS: DIAGNOSTIC, IMAGING, LIFE SUPPORT, LABORATORY, Applications include: • O-rings • Gaskets • Wheels • Soft touch grips/handles • Keypads/displays • Diaphragms • Seals Flexible Component Solution Needs: • Comfortable handles & grips • Water-tight seals • Durable feet or casters • Durable keypads • Flow control TPE, TPC-ET, TPU, TPV & Flexible PVC Thermoplastic Avient Versaflex™ HC Overmolding Series Proven healthcare solutions with hardness ranges 42–65 Shore A; autoclave, radiation and EtO sterilizable; bondable to many substrates; customizable haptics Arkema Pebax® MED Sterilizable by gamma and EtO; low energy return; soft touch; chemical resistance; overmolding material Thermoplastic Polyester DuPont™ Hytrel® Wide range of flexibility, stiffness, and processing options; Shore D between 30-82; BPA-free; excellent flex fatigue and toughness; low temperature flexibility; good chemical resistance Thermoplastic Polyurethane Covestro Texin® Biocompatible; soft touch; sterilizable; good chemical resistance; overmold for grips and handles; excellent bonding to polar substrates like PC; 70A to 95A Thermoplastic Vulcanizate Avient Versalloy™ Proven healthcare solutions with hardness ranges 45–90 Shore A; autoclave, radiation and EtO sterilizable; natural and colorable; smooth texture; bonds to PP Exxon Mobil Santoprene™ Durable sealing performance; elastic recovery; excellent chemical resistance; compliance with medical standards Flexible Polyvinyl Chloride GEON Performance Solutions Geon™ Flexible PVC Engineered exclusively for the healthcare market; transparent and opaque colors; radiopaque grades available; durometer ranges from 55A to 40D; gamma and EtO sterilizable Thermoset Silicone Elastomers Thermoset Silicone Elastomers/ Liquid Silicone Rubber (LSR) DuPont™ Liveo™ Silicone Elastomers (LSR) Biocompatible; non-irritating and non-sensitization; sterilizable; made without plasticizers, phthalates or latex PVC Polyvinyl Chloride GEON Performance Solutions Geon™ Flexible PVC Inherent flame resistance; halogen-free; excellent chemical resistance; non-yellowing; proven safety record in wire and cable applications; high temperature grades available TPE, TPC-ET, TPU & POE Thermoplastic Polyester Arkema Pebax® Flexibility; chemical resistance; easy processing; abrasion resistance; low coefficient of friction Thermoplastic Polyester Elastomers (TPC-ET) DuPont™ Hytrel® REACH, RoHS and WEEE compliant; wide range of flexibility, stiffness, and processing options; 30D-82D; BPA-free; excellent flex fatigue and toughness; low temperature flexibility; good chemical resistance Thermoplastic Polyurethane Covestro Texin® RoHs, WEEE, and REACH compliant; excellent memory and recoil; abrasion resistance; Texin® Rx Series - medical grade Polyether TPU – 70A to 80D Polyolefin Elastomer (POE) Avient ECCOH™ Non-halogenated flame retardant; high flexibility; environmental stress cracking resistance (ESCR); good electrical properties PA Polyamide (Nylon, PA) Arkema Rilsan® (PA) Chemical resistance; easy processing; abrasion resistance; low coefficient of friction; dimensional stability WIRE & CABLE: DIAGNOSTIC, IMAGING, LIFE SUPPORT, LABORATORY, Applications include: • Plug molding • Flexible jacket • Heater cable insulation • Flexible cords • Coil cords & cable Wire & Cable Component Solution Needs: • Materials compliant with UL, RoHS, REACH & WEEE, if needed • Materials with good chemical, moisture & abrasion resistance • Low smoke & non-halogen materials CUSTOM AVIENT SOLUTIONS FOR MEDICAL EQUIPMENT Custom Solution Needs Avient™ Custom Solutions Specialized materials to meet unique application requirements Avient Trilliant™ Healthcare products are a line of customized solutions specific for regulated medical devices; color branding expertise FDA-registered pre-colored resins and masterbatch options; color coding for safety and brand recognition Avient collaborates with key material suppliers to provide FDA-approved pre-colored resins Avient OnColor™ HC Plus offers customizable color masterbatch solutions pre-certified for biocompatibility using ISO 10993 and USP Class VI test protocol Reduced growth of microbes Avient WithStand™ additive technologies inhibit growth of microbes that often cause odor, staining and loss of mechanical properties AVIENT DISTRIBUTION Healthcare Supplier Line Card You face a unique set of challenges when designing parts for the healthcare industry.

RIGID COMPONENTS: DIAGNOSTIC, IMAGING, LIFE SUPPORT, LABORATORY, & MONITORING EQUIPMENT (housings & covers, monitor bezels, body panels, handles, battery enclosures, access panels, wands, coils) Rigid Component Materials compliant with ISO 10993 & USP Class VI, if required UL approved resins to meet flammability requirements Housings with toughness & good impact resistance Enclosures & components that withstand repeated cleanings High-flow materials for components with complex designs Copolyester, Polyester & PC/Polyester Blends Copolyester Eastman Tritan™ (Copolyester) High chemical resistance to a wide variety of hospital disinfectants; excellent toughness and impact resistance after disinfection; retains color and gloss after sterilization and disinfection; does not contain BPA, BPS or halogens Polybutylene Terephthalate (PBT) DuPont™ Crastin® & Rynite® (FR- PBT) 30% glass reinforced; flame retardant; good mold flow and electrical properties; high strength, stiffness, dimensional stability and heat resistance Polyester (PC/PET) & Polybutylene Terephthalate (PC/PBT) Covestro Makroblend® (FR-PC/PET) & (FR-PC/PBT) Strength; toughness; chemical resistance; flame retardant Covestro Makroblend® (Non-FR PC/PBT) Strength; toughness; chemical resistance; limited biocompatibility Trinseo EMERGE™ (FR-PC/PET) Chemical resistance; ignition resistance; limited biocompatibility PA, PVC, PC & PMMA Polyamide (Nylon, PA) Avient Trilliant™ XR Radiation Shielding (PA) Radiation shielding; green alternative for lead replacement; enhanced design freedom vs. lead; available in hard and soft durometers Arkema Rilsan® MED (PA11) & Rilsamid® MED (PA12) Chemical resistance; transparent and opaque; easy processing; creep resistance; temperature resistance; BPA-free; sterilizable by gamma, EtO and steam Polyvinyl Chloride GEON Performance Solutions Resilience™ HC (PVC) Excellent chemical resistance; good strength and stiffness; very good surface quality; inherently flame resistant; available in all medical colors; excellent solvent bonding to PVC Polycarbonate (PC) Trinseo EMERGE™ (PC) Ignition resistant; transparent and opaque; glass-filled also available PolyMethyl Methacrylate (PMMA) Altuglas Plexiglas® Acrylics (PMMA) Clarity; easy processing; chemical resistance; BPA free; ideal for light piping and lenses Styrenics & FR-PC/ABS Blends Styrenics Trinseo MAGNUM™ (ABS) Opaque; custom colors; excellent impact and flow; low residuals; full biocompatibility INEOS Styrolution Terlux® HD (MABS) Good clarity; good heat and overall chemical resistance; good impact strength; good solvent bonding to PVC; outstanding surface quality INEOS Styrolution Lustran® & Novodur® HD (ABS) Opaque appearance; outstanding chemical resistance; high impact strength; excellent balance of properties; ease of processability; bondable FR- Polycarbonate/ ABS Covestro Bayblend® Flame retardant; good impact resistance; dimensional stability; toughness Trinseo EMERGE™ Ignition resistant; limited biocompatibility; high flow; easy processing; glass-filled also available Flexible Component Solution Needs: Comfortable handles & grips Water-tight seals Durable feet or casters Durable keypads Flow control TPE, TPC-ET, TPU, TPV & Flexible PVC Thermoplastic Avient Versaflex™ HC Overmolding Series Proven healthcare solutions with hardness ranges 42–65 Shore A; autoclave, radiation and EtO sterilizable; bondable to many substrates; customizable haptics Arkema Pebax® MED Sterilizable by gamma and EtO; low energy return; soft touch; chemical resistance; overmolding material Thermoplastic Polyester DuPont™ Hytrel® Wide range of flexibility, stiffness, and processing options; Shore D between 30-82; BPA-free; excellent flex fatigue and toughness; low temperature flexibility; good chemical resistance Thermoplastic Polyurethane Covestro Texin® Biocompatible; soft touch; sterilizable; good chemical resistance; overmold for grips and handles; excellent bonding to polar substrates like PC; 70A to 95A Thermoplastic Vulcanizate (TPV) Avient Versalloy™ (TPV) Proven healthcare solutions with hardness ranges 45–90 Shore A; autoclave, radiation and EtO sterilizable; natural and colorable; smooth texture; bonds to PP Exxon Mobil Santoprene™ (TPV) Durable sealing performance; elastic recovery; excellent chemical resistance; compliance with medical standards Flexible Polyvinyl Chloride GEON Performance Solutions Geon™ Flexible PVC Engineered exclusively for the healthcare market; transparent and opaque colors; radiopaque grades available; durometer ranges from 55A to 40D; gamma and EtO sterilizable Thermoset Silicone Elastomers Thermoset Silicone Elastomers/ Liquid Silicone Rubber DuPont™ Liveo™ Silicone Elastomers (LSR) Biocompatible; non-irritating and non-sensitization; sterilizable; made without plasticizers, phthalates or latex FLEXIBLE COMPONENTS: DIAGNOSTIC, IMAGING, LIFE SUPPORT, LABORATORY, MONITORING EQUIPMENT (o-rings, gaskets, wheels, soft touch grips/handles, keypads/displays, diaphragms, seals) WIRE & CABLE: DIAGNOSTIC, IMAGING, LIFE SUPPORT, LABORATORY, & MONITORING EQUIPMENT (plug molding, heater cable insulation, flexible jacket, flexible cords, coil cords & cable) Wire and Cable Component Solution Needs: Materials compliant with UL, RoHS, REACH & WEEE, if needed Materials with good chemical, moisture & abrasion resistance Low smoke & non- halogen materials PVC Polyvinyl Chloride GEON Performance Solutions Geon™ Flexible PVC Inherent flame resistance; halogen-free; excellent chemical resistance; non-yellowing; proven safety record in wire and cable applications; high temperature grades available TPE, TPC-ET, TPU & POE Thermoplastic Polyester Arkema Pebax® Flexibility; chemical resistance; easy processing; abrasion resistance; low coefficient of friction Thermoplastic Polyester Elastomers (TPC-ET) DuPont™ Hytrel® REACH, RoHS and WEEE compliant; wide range of flexibility, stiffness, and processing options; 30D-82D; BPA-free; excellent flex fatigue and toughness; low temperature flexibility; good chemical resistance Thermoplastic Polyurethane Covestro Texin® RoHs, WEEE, and REACH compliant; excellent memory and recoil; abrasion resistance; Texin® Rx Series - medical grade Polyether TPU – 70A to 80D Polyolefin Elastomer (POE) Avient ECCOH™ Non-halogenated flame retardant; high flexibility; environmental stress cracking resistance (ESCR); good electrical properties PA Polyamide (Nylon, PA) Arkema Rilsan® (PA) Chemical resistance; easy processing; abrasion resistance; low coefficient of friction; dimensional stability CUSTOM AVIENT SOLUTIONS FOR MEDICAL EQUIPMENT Custom Solution Needs Avient™ Custom Solutions Specialized materials to meet unique application requirements Avient Trilliant™ Healthcare products are a line of customized solutions specific for regulated medical devices; color branding expertise FDA-registered pre-colored resins and masterbatch options; color coding for safety and brand recognition Avient collaborates with key material suppliers to provide FDA-approved pre-colored resins Avient OnColor™ HC Plus offers customizable color masterbatch solutions pre-certified for biocompatibility using ISO 10993 and USP Class VI test protocol Reduced growth of microbes Avient WithStand™ additive technologies inhibit growth of microbes that often cause odor, staining and loss of mechanical properties AVIENT DISTRIBUTION Healthcare Supplier Line Card You face a unique set of challenges when designing parts for the healthcare industry.

Figure 1 Surface energy of various thermoplastic elastomers with rigid thermoplastics Engineering Plastics Polyamide 6,6 ABS Polycarbonate Acrylic Polystyrene Polypropylene Polyethylene Elastomers COPA TPU COPE S-TPE TPV mPE Surface Energy (mN/m) 46 43 40 37 34 31 28 Figure 2 Schematic diagram of the peel test Table I Physical property of TPE-1 Shore A Hardness (10 second delay) 44 Specific Gravity (g/cm3) 0.90 Color Natural 300 % Modulus (PSI) 348 Tensile Strength (PSI) 603 Elongation at Break (%) 598 Tear Strength (lbf/in) 110 Table II Adhesion value of TPE-1 on different substrates Substrate Average Peel Strength (lbf) Failure Type PP 17 Cohesive Copolyester 13 Adhesive PET 13 Adhesive PPE/HIPS 18 Adhesive PMMA 15 Adhesive PS 18 Adhesive PC 17 Adhesive PC/ABS 14 Adhesive HIPS 13 Adhesive ABS 13 Adhesive Table III Properties and peel strength of TPE-2 materials 15.37Nylon 11.16.5POM 227Polyester 22.619PC/ABS 24.5-ABS 20.828PP Peel Strength (PIL) 713721Tensile Elongation (%): 10811010Tensile Strength (psi): 5651Hardness: BA 15.37Nylon 11.16.5POM 227Polyester 22.619PC/ABS 24.5-ABS 20.828PP Peel Strength (PIL) 713721Tensile Elongation (%): 10811010Tensile Strength (psi): 5651Hardness: BA Figure 3 Capillary viscosity of TPE-1 and -2 at 200°C 1.00E+00 1.00E+01 1.00E+02 1.00E+03 1.00E+01 1.00E+02 1.00E+03 1.00E+04 1.00E+05 Shear rate (1/sec) Vi sc os ity (P a* se c) TPE-1 TPE-2A TPE-2B GLS Corporation Abstract Introduction Experimental Material Two classes of “universal overmolding TPEs” have been developed and used in this study.

MULTIPURPOSE COLORANTS Polyethylene 1% Polypropylene 1% GP Polystyrene 1% HI Polystyrene 1–2% Acrylics (Opaque) 1% PBT Polyester 1% PET Polyester 1% Polyurethane 1–2% Polyamide (Nylon) 1% Acetal 1% SAN 1% ABS 1–3% PVC 1–3% Polycarbonate 1% Thermoplastic 1–3% Alloys & Blends 1–3% EVA 1% Filled Polymers 1–3% RECOMMENDED ADDITION RATES CONCENTRATE SELECTION Omnicolor colorants are generally selected because of their versatility where a wide range of polymers are processed and their availability for sale in small quantities. Transparent acrylic colors PIGMENT COMPATIBILITY The Omnicolor range has been formulated with high quality, heavy metal-free pigments that perform well in a wide range of polymers under most processing conditions.

Solvent Solvents soften surfaces of plastic (plastic must be soluble)—best for amorphous or low crystalline plastics, such as ABS, acrylic, cellulosic, PC, PS, PPO, and vinyls. End of Fill Part Length Dynamic Pressure Hydrostatic Pressure P ss Gate End Part FIGURE 61 - Deflection Equations H F WLMax Deflection: 0.002" (0.05mm) 1 = W • H3 12 _______ bending = F • L3 48 • E • I _______ k Vcoolant nmax, coolant • Pcoolant • Cp, coolant Dmin = k Vcoolant nmax, coolant • Pcoolant • Cp, coolant Dmin = k Vcoolant nmax, coolant • Pcoolant • Cp, coolant Dmin = FIGURE 60 - Pressure vs Part Length FIGURE 61 - Deflection equations FIGURE 62 - For Plate Shaped Parts FIGURE 63 - For Cylindrical Shaped Parts Design Guide 49 • MMoldings = Combined mass of molded parts • Cp = Specific Heat of the material Step 3 – Heat Removal Rate • Nlines = The total number of independent cooling lines there are in the mold • tc = The cooling time required by the part (Determined in step 1) Step 4 – Coolant Volumetric Flow Rate • ΔTMax,Coolant = Change in coolant Temperature During Molding (1°C) • ρCoolant = Density of coolant • CP = Specific heat of coolant Step 5 – Determine Cooling Line Diameter • ρCoolant = Density of coolant • VCoolant = Volumetric flow rate of coolant • μCoolant = Viscosity of coolant • ΔPline = Max pressure drop per line (Usually equals half of the pump capacity) • LLine = Length of the cooling lines COOLING LINE SPACING k Vcoolant nmax, coolant • Pcoolant • Cp, coolant Dmin = k Vcoolant nmax, coolant • Pcoolant • Cp, coolant Dmin = k Vcoolant nmax, coolant • Pcoolant • Cp, coolant Dmin = k Vcoolant nmax, coolant • Pcoolant • Cp, coolant Dmin = k Vcoolant nmax, coolant • Pcoolant • Cp, coolant Dmin = k Vcoolant nmax, coolant • Pcoolant • Cp, coolant Dmin = 2D < H < 5D H < W < 2H FIGURE 70 - Cooling Line Spacing FIGURE 64 - Heat Transfer Equation FIGURE 65 - Total Cooling for Mold FIGURE 66 - Cooling Required by Each Line FIGURE 68 - Max Diameter Equation FIGURE 69 - Min Diameter Equation FIGURE 67 - Volumetric Flow Rate Equation 50 Gravi-Tech ADHESIVE ADVANTAGES DISADVANTAGES Cyanoacrylate Rapid, one-part process Various viscosities Can be paired with primers for polyolefins Poor strength Low stress crack resistance Low chemical resistance Epoxy High strength Compatible with various substrates Tough Requires mixing Long cure time Limited pot life Exothermic Hot Melt Solvent-free High adhesion Different chemistries for different substrates High temp dispensing Poor high temp performance Poor metal adhesion Light Curing Acrylic Quick curing One component Good environmental resistance Oxygen sensitive Light source required Limited curing configurations Polyurethane High cohesive strength Impact and abrasion resistance Poor high heat performance Requires mixing Silicone Room temp curing Good adhesion Flexible Performs well in high temps Low cohesive strength Limited curing depth Solvent sensitive No-Mix Acrylic Good peel strength Fast cure Adhesion to variety of substrates Strong odor Exothermic Limited cure depth Design Guide 51 Bibliography 1.

ONCOLOR™ UL 94 COLORANTS HOW TO USE THE TABLES UL HB GENERIC RESIN TYPE FLAME MINIMUM THICKNESS MAXIMUM LET-DOWN Acetal Copolymer (POM) HB 1.50 1:20 Acrylonitrile Butadiene Styrene (ABS) HB 1.50 1:10 Ethylene Propylene Thermoplastic Rubber (EPTR) HB 1.50 1:20 High Impact Polystyrene (HIPS) HB 1.50 1:10 Liquid Crystal Polymer (LCP) HB 0.83 1:10 Polyamide (PA) HB 3.20 1:33 Polyamide (PA66 and PA 4/6) HB 0.81 1:20 Polyamide 6 (PA6) HB 0.75 1:25 Polyamide 66 (PA66) HB 0.40 1:40 Polybutylene Terephthalate (PBT) HB 0.81 1:20 Polybutylene Terephthalate/Polycarbonate (PBT/PC) HB 1.50 1:10 Polycarbonate (PC) HB 1.50 1:15 Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) HB 1.50 1:20 Polycarbonate/Polyethylene Terephthalate (PC/PET) HB 1.50 1:20 Polyethylene (PE) HB 1.50 1:50 Polyethylene Terephthalate (PET) HB 0.80 1:16.7 Polyketone HB 1.50 1:20 Polymethyl Methacrylate (PMMA) HB 3.00 1:25 Polypropylene (PP) HB 1.50 1:15 Polystyrene (PS) HB 0.83 1:15 Polyurethane (PUR) HB 1.50 1:25 Polyvinylchloride (PVC) HB 1.50 1:20 Styrene Acrylonitrile (SAN) HB 1.50 1:20 Thermoplastic Elastomer (TPE) HB 0.75 1:25 ASCEND GENERIC MINIMUM THICKNESS FLAME MAXIMUM LET-DOWN Polyamide 66 21X1(a)(f2), 21SPC1(a)(f2), 21SPF1(a)(f2), 21SPG1(a)(f2), 21SPM1(a)(f2), 20NSP1(a)(f2) 0.75 V-2 1:40 22HSP(e) 0.75 V-2 1:40 64C-R 3.0 V-2 1:50 ECO366(e) 0.4 V-0 1:40 ECO366H(e) 0.2 V-0 1:25 FR350J 0.4 V-0 1:25 20NSP(a)(f2), 21SPF(a)(f2), 21SPM(a)(f2), 21SPC(a)(f2) 0.4 V-2 1:40 20NSP(a)(h)(f2), 21SPF(a)(h)(f2), 21SPM(a)(h)(f2), 21SPC(a)(h) (f2) 1.5 V-2 1:20 Polyamide 66/6 (PA66/6) ECO315(e), ECO315J(e) 0.4 V-0 1:40 M344 3.0 V-0 1:25 909 0.75 V-0 1:25 BASF GENERIC MINIMUM THICKNESS FLAME MAXIMUM LET-DOWN Polyamide 6 8202(t1), 8202 Blend (t1) 0.71 V-2 1:25 8202C(t1), 8202C BLEND (t1) 1.50 V-2 1:25 8202CHS(t1) (t3), 8202C HS Blend 1.50 V-2 1:25 8202HS(t1) 1.50 V-2 1:25 B3S 0.80 V-2 1:25 B3S Q661 1.50 V-2 1:25 B3S R03 1.50 V-2 1:25 8232G HSFR(t9), B3U10G5 (t9) 1.50 V-0 1:25 Polyamide 6/66 (PA6/66) C3U (m) 0.40 V-0 1:25 KR4205(m), C3U (m), C3U (t)(m) 0.40 V-0 1:25 KR4205, C3U 0.40 V-0 1:25 Polyamide 66 1000(b), 1310-(b), Ultramid A3K Q603(+) 1.50 V-2 1:10 A3K (o) Q790(g)(f2) 0.41 V-2 1:20 A3K(f2), A3K Q601(f2) 0.41 V-2 1:20 A3SK 0.41 V-2 1:25 A5 3.00 V-2 1:33 A3W(f1), A3W FC (f1) 0.75 V-2 1:10 A3K R01 (t)(g)(f2) 0.40 V-2 1:20 Polybutylene Terephthalate B4406 G2 (o) Q798 1.50 V-0 1:20 B4406 G2(a), B4406 G2 (o) Q717(a) 1.50 V-0 1:20 B4406 G3 (o) Q798 1.50 V-0 1:20 B4406 G3(a), B4406 G3 (o) Q717(a) 1.50 V-0 1:20 B4406 G4 (o) Q798 1.50 V-0 1:20 B4406 G4(a2), B4406 G4 (o) Q717(a2) 1.50 V-0 1:20 B4406 G6 (o) Q798 3.00 V-0 1:12.5 B4406 G6(%) 1.50 V-0 1:20 B4406 G6(a1), B4406 G6 (o) Q717(a1), B4406 G6 (o) Q717 High Speed(a1) 1.50 V-0 1:20 B4406(a), B4406 (o) Q717(a) 1.50 V-0 1:20 B4406@ 1.50 V-0 1:20 B4450 G5, B4450 G5 (t) 0.40 V-2 1:50 Polyurethane (PUR) 11 85 A(a) FHF 000 (f2) 0.75 V-0 1:33 CELANESE GENERIC MINIMUM THICKNESS FLAME MAXIMUM LET-DOWN Liquid Crystal Polymer (LCP) A130(+), MT1310 1.50 V-0 1:40 Polyamide (PA) 132F(+)(f1), 135F(+)(f1) 0.75 V-2 1:20 HTNFR42G30NH 0.40 V-0 1:25 Polyamide 6/12 (PA6/12) 151, 151L 1.50 V-2 1:25 Polyamide 66 A3 GF 25 V0XI 0.40 V-0 1:25 101(r9)(f1), 101F(r9)(f1), 101L(r9)(f1) 0.75 V-2 1:20 103FHS(+), 103HSL(+) 0.75 V-2 1:20 FR50(+)(f1) 0.35 V-0 1:20 FR7025V0F(+) 0.50 V-0 1:33 Polyamide 66/6 (PA66/6) FR72G25V0 0.80 V-0 1:25 Polyamide 66/6T (PA66/6T) FR95G25V0NH 0.40 V-0 1:25 HTNFR52G30BL(r3) 0.75 V-0 1:33 HTNFR52G30L(+), HTNFR52G30(+) 0.75 V-0 1:33 HTNFR52G30NH(r6) 0.40 V-0 1:25 0.75 V-0 1:10 HTNFR52G35BL 0.75 V-0 1:25 HTNFR52G35(+), HTNFR52G35 0.75 V-0 1:33 Polyamide 6T/ MPMDT HTNFR51G35L(+) 0.81 V-0 1:33 Polybutylene Terephthalate 2016(b) 1.50 V-0 1:20 3116(b) 1.50 V-0 1:20 3216(b) 1.50 V-0 1:20 3316(b) 1.50 V-0 1:20 3316HF 1.50 V-0 1:20 LW9030FR 1.50 V-0 1:25 T841FR (r4) 1.50 V-0 1:25 Polyethylene Terephthalate (PET) FR530(l)(+)(f1), FR530L(l)(+)(f1) 0.75 V-0 1:25 Thermoplastic Elastomer (TPE) HTR8068 1.60 V-0 1:25 DOMO GENERIC MINIMUM THICKNESS FLAME MAXIMUM LET-DOWN Polyamide (PA) J 60X1 V30 0.40 V-0 1:25 Polyamide 6 PSB 286 0.80 V-2 1:25 3.00 V-2 1:25 S 60X1 V30 0.75 V-0 1.25 Polyamide 66 A 205F(r4) 0.38 V-2 1:25 A 225F 0.75 V-2 1:25 A 50H1 (r3)(f2) 0.40 V-0 1:25 A 30G1 0.40 V-0 1:25 COVESTRO GENERIC MINIMUM THICKNESS FLAME MAXIMUM LET-DOWN Polycarbonate 2407 + (z)(f1) 0.75-2.60 V-2 1:10 2807 + MAS183 0.75 V-2 1:25 6455 + (z) 6485 + (z)(f1) 1.50 V-0 1:25 Acrylonitrile Butadiene Styrene FR110 + 1.50 V-0 1:33 FR3005 HF + (z), FR3005 HF + BBS314 1.50 V-0 1:12.5 FR3010 + (z) 1.50 V-0 1:25 FR3010 HF + 3.00 V-0 1:25 FR3030 + 3.00 V-0 1:25 ENVALIOR GENERIC MINIMUM THICKNESS FLAME MAXIMUM LET-DOWN Polyamide 46 (PA46) TE250F6(h1)(j) 0.50 V-0 1:25 Polyamide 6 F223-D(f1), F223-D /A(f1) 0.75 V-2 1:25 K222-KGV5(f1) 0.75 V-2 1:16.7 1.50 V-2 1:16.7 K-FKGS6/B(f1)(y) 0.80 V-0 1:25 Polyamide 66 (PA66) SG-KGS6/HV 0.75 V-0 1:25 Thermoplastic Elastomer (TPE) PL460-S 1.60 V-0 1:25 Polyamide 4T (PA4T) T11 (h) 0.40 V-0 1:20 EXXONMOBIL LANXESS GENERIC MINIMUM THICKNESS FLAME MAXIMUM LET-DOWN Ethylene Propylene Thermoplastic Rubber (EPTR) 251-80W232(f7) 1.50 V-2 1:20 251-92W232 1.50 V-0 1:20 251-70W232 1.00 V-2 1:10 GENERIC MINIMUM THICKNESS FLAME MAXIMUM LET-DOWN Polyamide 6 B30S+(f1) 1.50 V-2 1:25 B31SK+ 1.50 V-2 1:25 Polybutylene Terephthalate B4235+ 1.50 V-0 1:10 TP364-302+, BF4232+(f1) 0.75 V-0 1:25 GENERIC MINIMUM THICKNESS FLAME MAXIMUM LET-DOWN Polybutylene Terephthalate 310(w) 1.50 V-0 1:20 310SE0(w) 1.50 V-0 1:20 310SE0(w),310SE0R(w) 1.50 V-0 1:20 420SE0(f1)(w)(GG)(rr1) 1.50 V-0 1:20 420SE0(f1)(w)(GG)(rr2) 1.50 V-0 1:20 457(w) 1.50 V-0 1:20 457(w), 451(w) 1.50 V-0 1:20 553(a)(f1)(w) 1.50 V-0 1:20 553(a)(f1)(w), 553E(a)(f1)(w), 553U(a)(f1)(w) 1.50 V-0 1:20 553(w)(f1), 553M(w)(f1) 1.50 V-0 1:20 DR48(w) 1.50 V-0 1:20 DR48,DR48M 1.50 V-0 1:20 V4760(a2) 0.40 V-0 1:20 EXVX1259, ENH4550 0.40 V-0 1:20 771 0.75 V-0 1:25 Polybutylene Terephthalate/ Polycarbonate (PBT/PC) 357(f1)(w)(IC), 357M(f1)(w)(IC), 357U(f1)(w)(IC) 1.50 V-0 1:20 357(f1)(w)(IC), 357U(f1)(w)(IC) 1.50 V-0 1:20 357X(f1) 1.50 V-0 1:20 V3900WX(GG)(f1)(IA), V3901WX(GG)(f1)(IA) 3.00 V-0 1:20 1.50 V-0 1:20 357(w)(f2)(IC), 357M(w)(f2)(IC), 357U(w)(f2)(IC) 1.50 V-0 1:20 GENERIC MINIMUM THICKNESS FLAME MAXIMUM LET-DOWN Polycarbonate 221(f2) 1.50 V-2 1:25 221R(f2) 1.50 V-2 1:25 500(f2), 500R(f2) 3.00 V-0 1:33 503(f1) 3.00 V-0 10:1 1.50 V-0 10:1 503(f1), 503R(f1) 3.00 V-0 10:1 1.50 V-0 10:1 943(ab) 1.50 V-0 1:20 943(f1) 1.50 V-0 1:20 943(f1), 923(f1) 1.50 V-0 1:20 950A, 920ASR, FXD911A(GG), 940ASR 1.50 V-2 1:25 CFR7630(f1)(gg*) 1.50 V-0 1:25 ML5139R(f2) 3.00 V-0 1:33 950A, FXD911A(GG), 940ASR 3.00 V-0 1:25 943 1.50 V-0 1:20 920A Acrylonitrile Butadiene Styrene C2950 1.50 V-0 6:100 C6200(GG) 2.00 V-0 1:20 Acrylonitrile Styrene Acrylate/ Polycarbonate (ASA/PC) HRA222 (GG) 0.80 V-2 1:20 SOLVAY (SYENSQO) GENERIC MINIMUM THICKNESS FLAME MAXIMUM LET-DOWN Polyphenyl Sulfone (PPSU) R-5100 (r1)(##), R-5000 (r1)(##) 1.50 V-0 1:10 Polyphthalamide (PPA) AFA-4133 V0(+) (*) 0.75 V-0 1:25 BASE RESIN GENERIC SPECIFIC MINIMUM THICKNESS FLAME MAXIMUM LET-DOWN ALBIS Polypropylene (PP) PP 13 CV2 14 1.50 V-2 1:25 AVIENT Polyvinylchloride M3700(X), M3755(X) 1.50 V-0 1:25 M3900 1.50 V-0 1:25 CHI MEI Acrylonitrile Butadiene Styrene (ABS) PA-765(+) 1.50 V-0 1:10 Acrylonitrile Butadiene Styrene PC-510(+) 1.50 V-0 1:25 EMS-CHEMIE Polyamide 6 (PA6) Grilon A 26 V0 0.75 V-0 1:25 FORMOSA Polycarbonate (PC) #1700+(f2) 0.36-0.42 V-2 1:50 GEON Polyvinylchloride 85891(f1) 1.70 V-0 1:20 85891(f2) 1.70 V-0 1:20 M3700(X) 1.50 V-0 1:25 M3900 1:25 INEOS Polystyrene (PS) 855 HV 3.00 V-1 100:4 INVISTA Polyamide 66 FRU4800 XHL (r1) 0.40 V-0 1:25 U4820L (r1) 0.40 V-2 1:25 BASE RESIN GENERIC SPECIFIC MINIMUM THICKNESS FLAME MAXIMUM LET-DOWN KINGFA Polyamide 66 (PA66) PA66-R11G25 (##) 0.25 V-0 1:25 KURARAY Polyamide 9T (PA9T) GP2300S 0.40 V-0 1:25 LG CHEM Acrylonitrile Butadiene Styrene LUPOY GP-5106-F 3.00 V-0 1:20 LOTTE CHEMICAL Acrylonitrile Butadiene Styrene (ABS) VH-0800(+) 1.50 V-0 1:25 Polycarbonate (PC) HN-1064(+) 0.75 V-2 1:10 1.20 V-1 1:10 Polystyrene (PS) VH-1800+ 1.50 V-0 1:25 MITSUBISHI Polycarbonate (PC) S-2000+(f1) 1.50-1.80 V-2 1:10 POLYMER PRODUCTS Polystyrene (PS) ZYNTAR 351 2.00 V-0 1:20 1.50 V-0 1:20 ZYNTAR 7000 2.00 V-0 1:25 ZYNTAR 702 2.00 V-0 1:25 8020 2.00 V-0 1:20 8120 2.00 V-0 1:20 8130 1.50 V-0 1:20 POLYMER RESOURCES Polycarbonate PC-FR1A-D, PC- FR2A-D, PC-FR3A-D 3.00 V-0 1:33 1.50 V-2 1:33 SUMITOMO Liquid Crystal Polymer (LCP) E6007LHF(ra) 0.30 V-0 1:25 E6007LHF-MR(gt) 0.20 V-0 1:12.5 BASE RESIN GENERIC SPECIFIC MINIMUM THICKNESS FLAME MAXIMUM LET-DOWN TORAY Polyamide 6 (PA6) 1017 1.60 V-2 1:16.5 Polyamide 66 3004-V0(rr), CM3004-V0(rr) 0.40 V-0 1:25 TRINSEO Polycarbonate (PC) 891(w) 1.10 V-0 1:25 WELLMAN Polyamide 66/6 (PA66/6) 220-N, 21L-N, 22L-N 1.50 V-2 1:25 WESTLAKE Polyvinylchloride 6597(f1), HF-6597(f1) 1.50 V-0 1:25 SP-7107 (f1)(a) 3.00 V-0 1:25 5VA AND 5VB BASE RESIN GENERIC SPECIFIC MINIMUM THICKNESS FLAME RATING COLORS MAXIMUM LET-DOWN AVIENT Polyvinylchloride (PVC) M3900 1.50 5VB ALL 1:25 WHITE 1:10 CELANESE Polyamide 66/6T (PA66/6T) FR95G25V0NH 1.50 5VA ALL 1:25 Polybutylene Terephthalate LW9030FR 2.00 5VA BLACK 1:25 3.00 5VA ALL 1:25 SK642FR 1.50 5VA BLACK 1:25 COVESTRO Acrylonitrile Butadiene Styrene FR3010 + (z) 3.00 5VA ALL 1:25 GEON Polyvinylchloride (PVC) M3900 1.50 5VB ALL 1:25 WHITE 1:10 Polybutylene Terephthalate/ Polycarbonate (PBT/PC) V3900WX(GG)(f1)(IA), V3901WX(GG)(f1)(IA) 3.00 5VA ALL 1:20 1.844.4AVIENT www.avient.com Copyright © 2024, Avient Corporation.

Capron 8333GHI N/mm (lb/in) 60A-I 60A-II 75A-III 55A-IV 65A-V 50A-VI 70A-VII 260C/500F 3.7 / 21 N/A 3.2 / 18 No No No No 276C/530F 3.7 / 21 3.7 / 21 3.2 / 18 2.1 / 12 No No No 288C/550F N/A N/A N/A 2.5 / 14 2.5 / 14 No No Capron 8333GHIHS N/mm (lb/in) 60A-I 60A-II 75A-III 55A-IV 65A-IV 50A-VI 70A-VII 260C/500F 3.9 / 22 N/A 3.3 / 19 No No No No 276C/530F 3.5 / 20 N/A 3.3 / 19 No No No No 288C/550F N/A N/A N/A 2.5 / 14 2.6 / 15 No No Ultramid B3ZG6 N/mm (lb/in) 60A-I 60A-II 75A-III 55A-IV 65A-IV 50A-VI 70A-VII 260C/500F 3.0 / 17 3.3 / 19 3.2 / 18 No No No No 276C/530F 3.2 / 18 3.3 / 19 3.2 / 18 No No No No 288C/550F 3.3 / 19 N/A 3.0 / 17 2.1 / 12 2.1 / 12 No No Zytel 70G33L N/mm (lb/in) 60A-I 60A-II 75A-III 55A-IV 65A-IV 50A-VI 70A-VII 260C/500F 3.7 / 21 N/A 3.3 / 19 No No No No 276C/530F 3.7 / 21 3.7 / 21 3.3 / 19 2.3 / 13 No No No 288C/550F N/A N/A N/A 2.1 / 12 2.5 / 14 No No Zytel 408HS N/mm (lb/in) 60A-I 60A-II 75A-III 55A-IV 65A-IV 50A-VI 70A-VII 260C/500F 3.0 / 17 N/A 3.2 / 18 No No No No 276C/530F 3.2 / 18 4 / 23 3.0 / 17 No No No No 288C/550F N/A N/A N/A 2.5 / 14 2.5 / 14 No No Zytel 409AHS N/mm (lb/in) 60A-I 60A-II 75A-III 55A-IV 65A-IV 50A-VI 70A-VII 260C/500F 3.2 / 18 N/A 3.0 / 17 No No No No 276C/530F 3.3 / 19 4.2 / 24 2.8/ 16 No No No No 288C/550F N/A N/A N/A 2.1 / 12 2.1 / 12 No No Page 6 of 11 Table 4: Two-shot molding comparison TPE 60A-I 75A-III 55A-IV 65A-IV 50A-VI 70A-VII Barrel temp C/F 260/500 260/500 288/550 288/550 288/550 288/550 Peel Values N/mm or Pli Capron 8333GHI 4.2 / 24 3.5 / 20 3.3 / 19 3.0 / 17 2.3 / 13 3.0 / 17 Capron 8333GHIHS 4.0 / 23 3.9 / 22 2.8 / 16 3.0 / 17 2.3 / 13 3.2 / 18 Zytel 70G33L 4.2 / 24 3.3 / 19 2.8 / 16 3.3 / 18 1.9 / 11 3.3 / 19 Zytel 408AHS 4.0 / 23 4.0 / 23 3.5 / 20 3.7 / 21 1.9 / 11 3.9 / 22 Zytel 409AHS 4.2 / 24 4.0 / 23 3.2 / 18 3.3 / 19 1.6 / 9 3.3 / 19 Surface Energy (mN/m) 46 43 40 37 34 31 28 Engineering Plastics Polyamide 6,6 ABS Polycarbonate Acrylic Polystyrene Polypropylene Polyethylene Elastomers Coplyamide TPU Copolyester Styrenic-TPE TPV metallocenes Figure1.

 Strong past performance demonstrates that our strategy and execution are working  Megatrends and emerging opportunities align with our strengths  Innovation and services provide differentiation, incremental pricing power, and competitive advantage  Strong and proven management team driving growth and performance  Addressable market exceeds $40 billion PolyOne Corporation Page 44 Appendix Kiosk Summaries Segments at a Glance Officer Biographies PolyOne Corporation Page 45 Anti-Counterfeiting Solutions  Includes formulation and consultative services to assist manufacturers and brand owners in positively identifying their packaging, devices, end products and raw materials in the field  Protects brand equity – defense against customer complaints or legal actions based on erroneous product identification  Protects consumer welfare – decrease in potential harm to consumers, reduction in unwarranted recall expenses  Secures supply chain integrity – support for safe expansion into new geographies PolyOne Corporation Page 46 Security and Safety Solutions  Polycast™ Bullet Resistant Sheet, an optically clear, non-yellowing acrylic, provides ballistics protection against powerful weapons • High-impact resistance that foils “smash-and-grab” thieves  GlasArmor™ Bullet Resistant Panels, a UL-listed solution with superior ballistic resistance yet weights 75% less than steel panel • Used in commercial security applications for business, home, and governmental facilities PolyOne Corporation Page 47 3D Printing  Collaborating with customers using 3D printers to create prototypes and samples  Enables customers to develop and test their products and innovations quickly and accurately  3D printing of molds and inserts allows OEMs to develop and test new product innovation using their own equipment and material of choice, more efficient than traditional processes PolyOne Corporation Page 48 Enhanced Ergonomic Technologies  Versaflex™ VDT was developed to absorb vibration and noise in a broad range of applications, including minimally invasive surgical instruments, electronics, firearms, archery and automotive  Can be overmolded onto a rigid substrate without the need for an adhesive to increase production efficiencies and profitability  Creates value by: • Increasing end-user comfort • Eliminating secondary assembly • Differentiating end products PolyOne Corporation Page 49 Sustainable Solutions  reFlex™ Bio-Based Plasticizer non- phthalate additive used to make vinyl more flexible • Derived primarily from soybeans rather than petroleum • Certified by USDA BioPreferred® program  Wilflex™ Oasis Water-Based Inks satisfy consumer demand for eco- conscious products • Long screen life and production- friendly to improve operational efficiencies, increase design quality PolyOne Corporation Page 50 Color and Design Services  First-of-its-kind offering that supports color and product development from concept to reality  Helps brand managers and designers evaluate color and design alternatives to: – accelerate and streamline product development – strengthen brand equity – build marketplace excitement  Enhances product differentiation  Improves efficiency and profitability PolyOne Corporation Page 51 Metal Replacement Technology  Portfolio of solutions that meet upper range of performance requirements, removing barriers to replacing metal with polymers  Applications include: • LED heat sinks • Electronic shielding (EMI/RFI) • Structural integrity at elevated temperatures (i.e., large appliances) • Lead-free radiation shielding (i.e., CT scanners)  Creates value by eliminating the need for machining and secondary operations, removing weight, streamlining production and improving cost efficiencies PolyOne Corporation Page 52 Medical Device Solutions  Catheters made using NEU™ View patent-pending technology are optically translucent, and have superior contrast under X-ray (radiopaque) when compared with alternative catheter materials  Formulations for cardiovascular and intravascular catheters are application-specific, incorporating medical-grade polymers, additives, color, and healthcare-centric manufacturing practices  Only commercially available product that has excellent visibility, both optically and under X-ray, to bolster clinician confidence and offer significant market advantage PolyOne Corporation Page 53 Consumer Electronics Solutions  Ability to offer multiple technology solutions on a global basis for this industry, where many OEMs design in one region, prototype in another, and manufacture in yet another  Sustainable / “green” solutions help customers to differentiate in this market  New formulations for emerging wearables market that meet skin contact requirements and aesthetic needs PolyOne Corporation Page 54 Building & 17% Electrical & 8% 19% At a Glance Global Specialty Engineered Materials 2013 Revenues: $0.6 Billion Solutions 2013 Revenue by Industry Segment Expanding Profits 1.1% 1.3% 3.4% 5.1% 9.6% 8.0% 8.6% 9.3% 12-16% 2006 2007 2008 2009 2010 2011 2012 2013 Q1 2014 2015 Operating Income % of Sales Target 43% 33% 11.6% PolyOne Corporation Page 55 Building & Electrical & Target At a Glance Global Color, Additives and Inks 2013 Revenues: $0.9 Billion Solutions Expanding Profits 1.7% 4.6% 5.1% 5.5% 7.2% 8.1% 9.7% 12.2% 12-16% 2006 2007 2008 2009 2010 2011 2012 2013 Q1 2014 2015 Operating Income % of Sales 44% 37% 2013 Revenue by Industry Segment 13.8% PolyOne Corporation Page 56 At a Glance Designed Structures and Solutions Solutions 2013 Revenues: $0.6 Billion Expanding Profits 2.2% 8 - 10% 6.5% 2012 PF Q1 2013 Q1 2014 2015 Operating Income % of Sales 0.2% Target 96% 1% Building & 32% 26% 2013 Revenue by Industry Segment PolyOne Corporation Page 57 5.5% 6.9% 3.8% 3.6% 5.5% 4.3% 6.3% 7.2% 2006 2007 2008 2009 2010 2011 2012 2013 Q1 2014 Operating Income % of Sales At a Glance Performance Products and Solutions Solutions Expanding Profits 2013 Revenues: $0.8 Billion 81% 1% 9-12% Target 2013 Revenue by Industry Segment 8% Building & 4% Electrical & 1%Industrial 2015 7.7% PolyOne Corporation Page 58 2.6% 3.0% 3.5% 4.0% 4.6% 5.6% 6.4% 5.9% 6 - 7.5% 2006 2007 2008 2009 2010 2011 2012 2013 Q1 2014 2015 Operating Income % of Sales 15.3% 46.0% 2006 Q1 2014 At a Glance Distribution *ROIC is defined as TTM adjusted OI divided by the sum of average debt and equity over a 5 quarter period Solutions 2013 Revenues: $1.1 Billion ROIC* Expanding Profits Target Building & Electrical & 24% 23% 6.1% http://www.polyone.com/Pages/VariationRoot.aspx