By 2030, Avient will assess its top suppliers representing 90% of our total raw material costs for alignment with our Sustainability Objectives. The Avient Supplemental Retirement Benefit Plan is also subject to the rules of Code Section 409A, which restricts the timing of distributions. Further, we did not utilize any statistical sampling or cost-of-living adjustments for purposes of determining our median employee.

Caption: Avient expands reSound™ TPE portfolio with a grade formulated using post-consumer recycled content that received No Objection Letter from U.S. This grade incorporates post-consumer recycled (PCR) material that received a no objection letter (NOL) from the U.S. The FDA no objection letter confirms that the recycled material included in this formulation can be used for manufacturing certain food-contact articles.

If the ink does not reach temperature, repeat the procedure with higher temperature settings. If the ink still does reach temperature, but goes higher than 5 degrees above the target, lower the temperature setting and repeat the procedure.

Recycle/Reuse and Waste Management Procedures Avient strives to achieve high environmental standards in both mature and emerging markets through the development of security and environmental management systems, audit/review procedures, certifications, local training programs and best-practice management systems.

Factors that could cause actual results to differ materially from those implied by these forward-looking statements include, but are not limited to: unexpected costs that may arise from the announced acquisition of the Magenta business; any material adverse changes in the acquired Magenta business; our ability to achieve the strategic and other objectives relating to the acquired Magenta business, including any expected synergies; our ability to successfully integrate the acquired Magenta business and achieve the expected results of the acquisition, including, without limitation, the acquisition being accretive; our ability to realize anticipated savings and operational benefits from the realignment of assets, including the closure of manufacturing facilities; the timing of closings and shifts of production to new facilities related to asset realignments and any unforeseen loss of customers and/or disruptions of service or quality caused by such closings and/or production shifts; separation and severance amounts that differ from original estimates; amounts for non-cash charges related to asset write-offs and accelerated depreciation realignments of property, plant and equipment, that differ from original estimates; our ability to identify and evaluate acquisition targets and consummate acquisitions; the ability to successfully integrate acquired companies into our operations, retain the management teams of acquired companies and retain relationships with customers of acquired companies including, without limitation, Spartech Corporation and/or Accella Performance Materials; disruptions, uncertainty or volatility in the credit markets that could adversely impact the availability of credit already arranged and the availability and cost of credit in the future; the financial condition of our customers, including the ability of customers (especially those that may be highly leveraged and those with inadequate liquidity) to maintain their credit availability; the speed and extent of an economic recovery, including the recovery of the housing market; our ability to achieve new business gains; the effect on foreign operations of currency fluctuations, tariffs and other political, economic and regulatory risks; changes in polymer consumption growth rates and laws and regulations regarding the disposal of plastic in jurisdictions where we conduct business; changes in global industry capacity or in the rate at which anticipated changes in industry capacity come online; fluctuations in raw material prices, quality and supply and in energy prices and supply; production outages or material costs associated with scheduled or unscheduled maintenance programs; unanticipated developments that could occur with respect to contingencies such as litigation and environmental matters; an inability to achieve or delays in achieving or achievement of less than the anticipated financial benefit from initiatives related to working capital reductions, cost reductions and employee productivity goals; an inability to raise or sustain prices for products or services; an inability to maintain appropriate relations with unions and employees; our ability to continue to pay cash dividends; the amount and timing of repurchases of our common shares, if any; and other factors affecting our business beyond our control, including, without limitation, changes in the general economy, changes in interest rates and changes in the rate of inflation.

Factors that could cause actual results to differ materially from those implied by these forward-looking statements include, but are not limited to: unexpected costs that may arise from the acquisition of the Kraton TPE business; any material adverse changes in the acquired Kraton TPE business; our ability to achieve the strategic and other objectives relating to the acquired Kraton TPE business, including any expected synergies; our ability to successfully integrate the acquired Kraton TPE business and achieve the expected results of the acquisition; our ability to realize anticipated savings and operational benefits from the realignment of assets, including the closure of manufacturing facilities; the timing of closings and shifts of production to new facilities related to asset realignments and any unforeseen loss of customers and/or disruptions of service or quality caused by such closings and/or production shifts; separation and severance amounts that differ from original estimates; amounts for non-cash charges related to asset write-offs and accelerated depreciation realignments of property, plant and equipment, that differ from original estimates; our ability to identify and evaluate acquisition targets and consummate acquisitions; the ability to successfully integrate acquired businesses into our operations, retain the management teams of acquired businesses and retain relationships with customers of acquired businesses; disruptions, uncertainty or volatility in the credit markets that could adversely impact the availability of credit already arranged and the availability and cost of credit in the future; the financial condition of our customers, including the ability of customers (especially those that may be highly leveraged and those with inadequate liquidity) to maintain their credit availability; the speed and extent of an economic recovery, including the recovery of the housing market; our ability to achieve new business gains; the effect on foreign operations of currency fluctuations, tariffs and other political, economic and regulatory risks; changes in polymer consumption growth rates and laws and regulations regarding the disposal of plastic in jurisdictions where we conduct business; changes in global industry capacity or in the rate at which anticipated changes in industry capacity come online; fluctuations in raw material prices, quality and supply and in energy prices and supply; production outages or material costs associated with scheduled or unscheduled maintenance programs; unanticipated developments that could occur with respect to contingencies such as litigation and environmental matters; an inability to achieve or delays in achieving or achievement of less than the anticipated financial benefit from initiatives related to working capital reductions, cost reductions and employee productivity goals; an inability to raise or sustain prices for products or services; an inability to maintain appropriate relations with unions and employees; our ability to continue to pay cash dividends; the amount and timing of repurchases of our common shares, if any; and other factors affecting our business beyond our control, including, without limitation, changes in the general economy, changes in interest rates and changes in the rate of inflation.

Factors that could cause actual results to differ materially from those implied by these forward-looking statements include, but are not limited to: unexpected costs that may arise from the acquisition of the Kraton TPE business; any material adverse changes in the acquired Kraton TPE business; our ability to achieve the strategic and other objectives relating to the acquired Kraton TPE business, including any expected synergies; our ability to successfully integrate the acquired Kraton TPE business and achieve the expected results of the acquisition; our ability to realize anticipated savings and operational benefits from the realignment of assets, including the closure of manufacturing facilities; the timing of closings and shifts of production to new facilities related to asset realignments and any unforeseen loss of customers and/or disruptions of service or quality caused by such closings and/or production shifts; separation and severance amounts that differ from original estimates; amounts for non-cash charges related to asset write-offs and accelerated depreciation realignments of property, plant and equipment, that differ from original estimates; our ability to identify and evaluate acquisition targets and consummate acquisitions; the ability to successfully integrate acquired businesses into our operations, retain the management teams of acquired businesses and retain relationships with customers of acquired businesses; disruptions, uncertainty or volatility in the credit markets that could adversely impact the availability of credit already arranged and the availability and cost of credit in the future; the financial condition of our customers, including the ability of customers (especially those that may be highly leveraged and those with inadequate liquidity) to maintain their credit availability; the speed and extent of an economic recovery, including the recovery of the housing market; our ability to achieve new business gains; the effect on foreign operations of currency fluctuations, tariffs and other political, economic and regulatory risks; changes in polymer consumption growth rates and laws and regulations regarding the disposal of plastic in jurisdictions where we conduct business; changes in global industry capacity or in the rate at which anticipated changes in industry capacity come online; fluctuations in raw material prices, quality and supply and in energy prices and supply; production outages or material costs associated with scheduled or unscheduled maintenance programs; unanticipated developments that could occur with respect to contingencies such as litigation and environmental matters; an inability to achieve or delays in achieving or achievement of less than the anticipated financial benefit from initiatives related to working capital reductions, cost reductions and employee productivity goals; an inability to raise or sustain prices for products or services; an inability to maintain appropriate relations with unions and employees; our ability to continue to pay cash dividends; the amount and timing of repurchases of our common shares, if any; and other factors affecting our business beyond our control, including, without limitation, changes in the general economy, changes in interest rates and changes in the rate of inflation.

Factors that could cause actual results to differ materially from those implied by these forward-looking statements include, but are not limited to: unexpected costs that may arise from the announced acquisition of the Gordon Composites and Polystrand businesses; any material adverse changes in the acquired businesses; our ability to achieve the strategic and other objectives relating to the acquired businesses, including any expected synergies; our ability to successfully integrate the acquired businesses and achieve the expected results of the acquisition, including, without limitation, the acquisition being accretive; our ability to realize anticipated savings and operational benefits from the realignment of assets, including the closure of manufacturing facilities; the timing of closings and shifts of production to new facilities related to asset realignments and any unforeseen loss of customers and/or disruptions of service or quality caused by such closings and/or production shifts; separation and severance amounts that differ from original estimates; amounts for non-cash charges related to asset write-offs and accelerated depreciation realignments of property, plant and equipment, that differ from original estimates; our ability to identify and evaluate acquisition targets and consummate acquisitions; the ability to successfully integrate acquired companies into our operations, retain the management teams of acquired companies and retain relationships with customers of acquired companies; disruptions, uncertainty or volatility in the credit markets that could adversely impact the availability of credit already arranged and the availability and cost of credit in the future; the financial condition of our customers, including the ability of customers (especially those that may be highly leveraged and those with inadequate liquidity) to maintain their credit availability; the speed and extent of an economic recovery, including the recovery of the housing market; our ability to achieve new business gains; the effect on foreign operations of currency fluctuations, tariffs and other political, economic and regulatory risks; changes in polymer consumption growth rates and laws and regulations regarding the disposal of plastic in jurisdictions where we conduct business; changes in global industry capacity or in the rate at which anticipated changes in industry capacity come online; fluctuations in raw material prices, quality and supply and in energy prices and supply; production outages or material costs associated with scheduled or unscheduled maintenance programs; unanticipated developments that could occur with respect to contingencies such as litigation and environmental matters; an inability to achieve or delays in achieving or achievement of less than the anticipated financial benefit from initiatives related to working capital reductions, cost reductions and employee productivity goals; an inability to raise or sustain prices for products or services; an inability to maintain appropriate relations with unions and employees; our ability to continue to pay cash dividends; the amount and timing of repurchases of our common shares, if any; and other factors affecting our business beyond our control, including, without limitation, changes in the general economy, changes in interest rates and changes in the rate of inflation.

Business Number: 898451794 Mailing Address: Address Line 1: 17 Tideman Drive City, Province/Territory, Postal Code: Orangeville Ontario L9W3K3 Country: Canada Facility Name: Orangeville Compound NAICS Code: 326198 NPRI ID: 4358 Physical Address: Address Line 1: 17 Tideman Drive City, Province/Territory, Postal Code: Orangeville Ontario L9W3K3 Country: Canada Latitude: 43.91230 Longitude: ­80.11300 Number or Permit Number: ON9820023 Government Department, Agency, or Program Name: Ontario MOE ­ Hazardous Waste Generator Number Number or Permit Number: 0778­6DZLMV Government Department, Agency, or Program Name: Certificate of Approval Air Number or Permit Number: 5626­5DFQF2 Government Department, Agency, or Program Name: Certificate of Approval Industrial Sewage Works Contact Type Technical Contact, Company Coordinator Name: Brian Greer about:/V003/Html http://www.canada.gc.ca/home.html http://www.servicecanada.gc.ca/eng/home.shtml http://www.canada.gc.ca/aboutgov-ausujetgouv/depts/menu-eng.html https://ec.ss.ec.gc.ca/auth/en/Services about:blank# about:blank# about:blank# about:/V003/Logout_Deconnexion http://ec.gc.ca/default.asp? Submitted Report Period Submission Date Facility Name Province City Programs 2016 13/03/2018 Orangeville Compound Ontario Orangeville NPRI Note: If there is a change in the contact information for the facility, a change in the owner or operator of the facility, if operations at the facility are terminated, or if information submitted for any previous year was mistaken or inaccurate, please update this information through SWIM or by contacting the National Pollutant Release Inventory directly. http://www.ec.gc.ca/default.asp?

Factors that could cause actual results to differ materially from those implied by these forward-looking statements include, but are not limited to: unexpected costs that may arise from the announced acquisition of the Magenta business; any material adverse changes in the acquired Magenta business; our ability to achieve the strategic and other objectives relating to the acquired Magenta business, including any expected synergies; our ability to successfully integrate the acquired Magenta business and achieve the expected results of the acquisition, including, without limitation, the acquisition being accretive; our ability to realize anticipated savings and operational benefits from the realignment of assets, including the closure of manufacturing facilities; the timing of closings and shifts of production to new facilities related to asset realignments and any unforeseen loss of customers and/or disruptions of service or quality caused by such closings and/or production shifts; separation and severance amounts that differ from original estimates; amounts for non-cash charges related to asset write-offs and accelerated depreciation realignments of property, plant and equipment, that differ from original estimates; our ability to identify and evaluate acquisition targets and consummate acquisitions; the ability to successfully integrate acquired companies into our operations, retain the management teams of acquired companies and retain relationships with customers of acquired companies including, without limitation, Spartech Corporation and/or Accella Performance Materials; disruptions, uncertainty or volatility in the credit markets that could adversely impact the availability of credit already arranged and the availability and cost of credit in the future; the financial condition of our customers, including the ability of customers (especially those that may be highly leveraged and those with inadequate liquidity) to maintain their credit availability; the speed and extent of an economic recovery, including the recovery of the housing market; our ability to achieve new business gains; the effect on foreign operations of currency fluctuations, tariffs and other political, economic and regulatory risks; changes in polymer consumption growth rates and laws and regulations regarding the disposal of plastic in jurisdictions where we conduct business; changes in global industry capacity or in the rate at which anticipated changes in industry capacity come online; fluctuations in raw material prices, quality and supply and in energy prices and supply; production outages or material costs associated with scheduled or unscheduled maintenance programs; unanticipated developments that could occur with respect to contingencies such as litigation and environmental matters; an inability to achieve or delays in achieving or achievement of less than the anticipated financial benefit from initiatives related to working capital reductions, cost reductions and employee productivity goals; an inability to raise or sustain prices for products or services; an inability to maintain appropriate relations with unions and employees; our ability to continue to pay cash dividends; the amount and timing of repurchases of our common shares, if any; and other factors affecting our business beyond our control, including, without limitation, changes in the general economy, changes in interest rates and changes in the rate of inflation.