 Consider environmental, health and safety impacts into product design, manufacture, use, reuse, recycling and disposal

KEY CHARACTERISTICS • Design for shelf life, ergonomics and differentiation • Lighter weight bottles • Lower system cost vs. other rigid packaging TARGET MARKET AND APPLICATIONS UHT Dairy Packaging TECHNOLOGY BENEFITS • 100% visible light blocking for monolayer containers • Recyclable with general PET waste stream, even though additive is also present • Lower system cost • Offers shape differentiation for containers • Enables container designs that increase ease of pouring • Useful for re-sealable containers • Useful for containers that can be stored flat after opening • Offers light-weighting for PET bottle without reducing light blocking performance www.avient.com Copyright © 2020, Avient Corporation.

throughput (kg/hr) 120 Max. metering rate (cc/s) 1.25 Continuous use Yes Transfer pumps PC Metering pumps PC Interchangeable cassette Yes Note: PC = Progressing Cavity Pump Peri = Peristatic Pump PLANETPAK™ CONTAINERS The FlexCart system is designed to work with the standardized PlanetPak container range of packaging, achieving 99% reliable yield whilst at the same time achieving a sustainable packaging format in terms of full recyclability.

throughput (kg/hr) 625 Max. metering rate (cc/s) 10 Continuous use Yes Transfer pumps Peri Metering pumps PC/Peri Interchangeable cassette Yes PLANETPAK™ CONTAINERS The FlexCart system is designed to work with the standardized PlanetPak container range of packaging, typically achieving 99% reliable yield while also achieving a sustainable packaging format that is fully recyclable.

Versaflex XP 2850 Hardness, Shore A 53 Specific Gravity 0.89 Color Natural Tensile Strength (psi) 616.4 Elongation at Break (%) 541.4 Viscosity @ 11170/sec (Pa s) 10.9 Dry Kinetic COF 1.256 Wet Kinetic COF 2.463 Increase in COF* (%) 96.1 Abrasion Loss** (mg/cycle) 0.014 Bondability*** PP, PE TECHNICAL PROPERTIES OF VERSAFLEX XP WET GRIP MATERIAL * Pull time = 5 sec; Sled Weight = 203 grams; Rate = 30cm/min ** Weight = 1000 grams; Cycles = 500; Wheel = H-18 *** For bonding to other substrates, please contact Avient COMPARING VERSAFLEX XP 2850 WITH COMMONLY USED WET GRIP MATERIALS 3.00 2.50 2.00 1.50 1.00 0.50 0.00 1.26 2.46 0.85 0.52 0.40 1.20 0.52 0.50 0.52 0.500.50 0.49 Wax Rubber EVA Foam Rubberized Vinyl Versaflex XP 2850 PVC DRY WET Wet/Dry COF Performance *Prepared to standard ASTM D1141-98R21 ps i D ur om et er (S ho re A )

KEY CHARACTERISTICS • Excellent wear resistance • Reduced friction, heat build-up, noise & vibration • Improved processability & surface finish on parts • Lower power requirements & low maintenance • Reduced tool contamination and corrosion • Reduction in lubricant migration time • Design flexibility • Reduced weight • Chemically resistant MARKETS & APPLICATIONS Ideal for applications in many industries including transportation, industrial, household, electrical and electronics including: • Transportation – Fuel flap axis, interior door handle axis, gears, seat mechanics, sun-roof sliding mechanisms, side mirror parts • Industrial – Conveyor belt gears, pulleys • Household – Window/door runners, furniture parts, hinges • Electrical and electronics – Electrical plug safety parts, printers, barcode scanners PRODUCT BULLETIN EUROPE GRADES ASIA GRADES Material Name Base Resin Reinforcing Filler Lubricating Filler LubriOne LB6000-5024 RS HI natural PA6 GF10 UHMWPE Lubrione LB6000-5021 RS S1 GF30 UHMWPE Lubrione LB6000-5021 RS X2 GF30 UHMWPE LubriOne LB6000-5019 X1 black GF50 UHMWPE LubriOne LB6700-5001 RS AF black PA6/PA66 GF50 UHMWPE LubriOne NN-000/01M black SO PA66 Unfilled MoS2 LubriOne REC LB6600-5030 RS grey GF33 Graphite LubriOne LB3300-5010 RS natural PBT GF20 UHMWPE LubriOne LB3300-5005 RS natural MI20 UHMWPE LubriOne REC LB3220-5001 RS C natural X1 PC GF10 UHMWPE LubriOne LB8900-5010 GP grey PKE Unfilled Graphite LubriOne LB8900-5006 RS PE natural GF20 UHMWPE LubriOne LB8900-5004 RS PE natural GF30 UHMWPE LubriOne LB4200-5022 black POM Unfilled MoS2 LubriOne LB4200-5023 natural Unfilled UHMWPE LubriOne LB9200-5012 RS PE natural PPS GF30 UHMWPE Material Name Base Resin Reinforcing Filler Lubricating Filler LubriOne LB6600-8056 LB BK001 PA66 Unfilled LDPE LubriOne LB6600-8054 RS BK001 CF30 LDPE LubriOne LB6600-8052 RS BK001 GF30 LDPE LubriOne LB4200-8032 RS NC001 POM GF30 LDPE LubriOne LB4200-8030 AR NC001 AF10 LDPE LubriOne LB4200-8026 LB BK001 Unfilled LDPE+HDPE LubriOne LB3200-8022 LB BK001 PC Unfilled UHMWHDPE LubriOne LB3200-8021 RS BK001 GF30 UHMWHDPE LubriOne LB7600-8008 RS BK001 PPO GF20 UHMWHDPE Copyright © 2024, Avient Corporation.

Available in opaque or transparent form based on PP resins, either as a concentrate or pre-colored formulation, the colors are standardized to RAL and Pantone color systems.

KEY CHARACTERISTICS • Designed for Nd:YAG lasers operating between 1060-1070 nm • Available for different polymers including PP, PE, PC, PBT, POM, ABS, MABS • Manufactured at four ISO 13485 certified sites, providing global consistency and increased security of supply • Documented change control beyond CAS number, reducing risk of change • Can be designed for dark marking on natural or white/light colored background or light marking on black/dark background REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Drug Master File (Type III) and/or Device Master File • Food contact established with FDA/EU* APPLICATION BULLETIN * FDA/EU compliance information available upon request.

When overmolded, GLS TPEs bond permanently and seamlessly to many different plastic substrates, including polypropylene (PP), polycarbonate (PC), acrylonitrile-butadiene- styrene (ABS), PC/ABS, copolyester, polyamide (nylon) and polystyrene (PS).

Not all GLS™ TPEs will bond to all types of substrates; for example, a Dynaflex™ TPE that bonds to polypropylene (PP) will not adhere to polycarbonate (PC). The most common color concentrate carrier is PP because it is compatible with many commercially available TPE products (for both single component molding and overmolding PP applications). The most common color concentrate carrier is PP because it is compatible with many commercially available TPE products (for both single component molding and overmolding PP applications).