POLYSTRAND CONTINUOUS FIBER REINFORCED THERMOPLASTIC TAPES & LAMINATES ™ PRODUCT SELECTION GUIDE Material Min Finished Slit Width Max Finished Slit Width Unidirectional Tape 2” (50.8 mm) 24” (610 mm) X-Ply™, 3-Ply, 4-Ply 2” (50.8 mm) 120” (3048 mm) SLITTING CAPABILITIES Max Unfinished Width Max Finished Slit Width Max Finished Roll Weight Max Roll Length (X-Ply™, Full Width) Up to 125" (3175 mm) Up to 120" (3048 mm) Up to 10,000 lbs (4500 kg) Up to 4,000 ft (1200 m) LAMINATION LINE CAPABILITIES Tape Width Resin Capabilities Fiber Inputs Max Tape Roll Weight Max Roll Length 25" (635 mm) Standard Width, Slit Capabilities PP, PE, PETG, aPET, PA6 Additional polymers in development E-Glass S-Glass, Aramid Up to 1,800 lbs (816 kg) Up to 12,000 ft (366 m) TAPE LINE CAPABILITIES Product Name Resin Fiber Content Areal Weight Nominal Thickness1 Flexural Modulus ASTM D790 Flexural Strength ASTM D790 Tensile Modulus ASTM D3039 Tensile Strength ASTM D3039 wt % lb/ft2 oz/yd2 gsm in mm ksi GPa ksi MPa ksi GPa ksi MPa 6337 PP 63 0.10 14.75 500 0.015 0.38 3570 24.6 58 402 4010 27.6 111 765 6531 65 0.05 7.40 251 0.006 0.15 4020 27.7 73 505 4900 33.8 140 965 6536 0.07 10.32 350 0.009 0.23 4050 27.9 72 494 4500 31.0 131 903 6538 0.14 19.77 670 0.019 0.48 3540 24.4 47 324 4260 29.4 100 689 7034B PP-Black 70 0.07 10.24 347 0.009 0.23 4400 30.3 83 569 5000 34.5 111 765 6020 PE 60 0.08 11.95 405 0.012 0.30 3600 24.8 54 372 3800 26.2 109 752 6621 66 0.10 13.97 474 0.012 0.30 4000 27.6 55 379 4720 32.5 126 869 68222 68 0.16 23.34 791 0.022 0.56 4060 28.0 55 379 4560 31.4 113 779 5843 PETG 58 0.08 11.85 402 0.008 0.20 3680 25.4 90 621 4400 30.3 137 945 5840B aPET-Black 58 0.09 13.00 441 0.009 0.23 4120 28.4 107 738 5080 35.0 150 1034 5860B PA6-Black 58 0.08 11.48 389 0.010 0.25 3620 25.0 104 717 3970 27.4 108 745 TYPICAL PROPERTIES - UNIDIRECTIONAL FIBERGLASS REINFORCED THERMOPLASTIC TAPE 1 Nominal thicknesses indicated are baseline values that may vary depending on material processing and other variables. TYPICAL PROPERTIES - MULTI-AXIAL LAMINATES 0° Testing Orientation 90° Testing Orientation Product Name Resin Fiber Content Laminate Layers & Orientation Areal Weight Nominal Thickness1 Flexural Modulus ASTM D790 Flexural Strength ASTM D790 Tensile Modulus ASTM D3039 Tensile Strength ASTM D3039 Flexural Modulus ASTM D790 Flexural Strength ASTM D790 Tensile Modulus ASTM D3039 Tensile Strength ASTM D3039 wt % lb/ft2 oz/yd2 gsm in mm ksi GPa ksi MPa ksi GPa ksi MPa ksi GPa ksi MPa ksi GPa ksi MPa 6337 PP 63 0/90 0.20 29.49 1000 0.031 0.79 - - - - 2020 13.9 59.7 412 - - - - 2020 13.9 59.7 412 0/90/0 0.31 44.24 1500 0.045 1.14 2250 15.5 46.4 320 3070 21.2 79.4 547 186 1.3 9.7 67 1330 9.2 39.6 273 0/90/90/0 0.41 58.98 2000 0.057 1.45 2000 13.8 44.0 303 2400 16.5 60.6 418 496 3.4 20.7 143 2210 15.2 56.4 389 6531 65 0/90 0.10 14.80 502 0.014 0.36 - - - - 2240 15.4 60.9 420 - - - - 2240 15.4 60.9 420 0/90/0 0.15 22.20 753 0.020 0.50 2650 18.3 58.3 402 3100 21.4 82.8 571 280 1.9 NB2 NB2 1670 11.5 42.5 293 0/90/90/0 0.21 29.61 1004 0.027 0.68 2260 15.6 51.5 355 2470 17.0 62.2 429 580 4.0 30.4 210 2310 15.9 59.6 411 6536 0/90 0.14 20.71 702 0.021 0.53 - - - - 1980 13.7 60.5 417 - - - - 1980 13.7 60.5 417 0/90/0 0.22 31.06 1053 0.029 0.74 2309 15.9 48.3 333 2730 18.8 81.5 562 245 1.7 13.0 90 1490 10.3 44.3 305 0/90/90/0 0.29 41.41 1404 0.037 0.94 2164 14.9 47 324 2170 15.0 59.6 411 512 3.5 25.4 175 2340 16.1 71.2 491 6538 0/90 0.27 39.54 1341 0.034 0.86 - - - - 2220 15.3 60.0 414 - - - - 2220 15.3 60.0 414 0/90/0 0.41 59.53 2018 0.057 1.44 2825 19.5 40.9 282 2780 19.2 67.6 466 218 1.5 10.2 70 1410 9.7 40.0 276 0/90/90/0 0.55 79.37 2691 0.073 1.85 1880 13.0 32.4 223 2060 14.2 54.0 372 478 3.3 18.0 124 2360 16.3 61.0 421 7034B PP-Black 70 0/90 0.14 20.48 694 0.016 0.40 - - - - 2680 18.5 62.0 427 - - - - 2680 18.5 62.0 427 0/90/0 0.21 30.72 1041 0.028 0.71 1750 12.1 55.9 385 3710 25.6 75.1 518 160 1.1 11.3 78 1440 9.9 36.2 250 0/90/90/0 0.28 40.95 1388 0.036 0.90 1700 11.7 40.4 279 2800 19.3 55.7 384 432 3.0 25.4 175 2350 16.2 52.4 361 6020 PE 60 0/90 0.17 23.90 810 0.023 0.57 - - - - 1830 12.6 52.00 359 - - - - 1830 12.6 52.0 359 0/90/0 0.25 35.86 1216 0.033 0.84 2265 15.6 40.0 276 2740 18.9 68.2 470 181 1.2 10.0 69 1350 9.3 35.3 243 0/90/90/0 0.33 47.81 1621 0.044 1.12 1810 12.5 30.0 207 2000 13.8 48.0 331 502 3.5 22.0 152 1820 12.5 46.0 317 6621 66 0/90 0.19 27.94 947 0.025 0.65 - - - - 2280 15.7 60.0 414 - - - - 2280 15.7 60.0 414 0/90/0 0.29 41.90 1421 0.040 1.01 2490 17.2 37.0 255 2900 20.0 70.0 483 165 1.1 9.7 67 1440 9.9 38.0 262 0/90/90/0 0.39 55.87 1894 0.053 1.35 1810 12.5 29.0 200 2160 14.9 58.0 400 508 3.5 21.0 145 2170 15.0 53.0 365 5843 PETG 58 0/90 0.16 23.70 804 0.020 0.50 - - - - 2050 14.1 59.6 411 - - - - 2050 14.1 59.6 411 0/90/0 0.25 35.55 1205 0.030 0.76 2800 19.3 89.0 614 2900 20.0 78.0 538 397 2.7 NB2 NB2 1580 10.9 42.5 293 0/90/90/0 0.33 47.40 1607 0.039 0.99 2540 17.5 72.0 496 2300 15.9 57.7 398 780 5.4 35.0 241 2170 15.0 63.0 434 5840B aPET-Black 58 0/90 0.18 26.01 882 0.021 0.53 - - - - 2530 17.4 55.3 381 - - - - 2530 17.4 55.3 381 0/90/0 0.27 39.01 1323 0.032 0.82 2986 20.6 91.1 628 3160 21.8 68.7 474 252 1.7 20.0 138 1580 10.9 36.9 254 0/90/90/0 0.36 52.01 1763 0.042 1.07 3065 21.1 73.1 504 2570 17.7 54.2 374 813 5.6 37.0 255 2440 16.8 55.6 383 5860B PA6-Black 58 0/90 0.16 22.95 778 0.021 0.52 - - - - 2190 15.1 56.00 386 - - - - 2190 15.1 56.0 386 0/90/0 0.24 34.43 1167 0.034 0.86 2510 17.3 117.0 807 2760 19.0 63.7 439 657 4.5 22.2 153 1630 11.2 39.7 274 0/90/90/0 0.32 45.91 1556 0.046 1.18 2210 15.2 106.0 731 2090 14.4 45.6 314 1110 7.7 50.8 350 2150 14.8 57.4 396 1 Nominal thicknesses indicated are baseline values that may vary depending on material processing and other variables.

Specific Gravity Color Index Heat Stability (F) Light- fastness Carrier White HC Plus-35000 Titanium Dioxide 60 1.78 White 6 Above 400° I/O LSR HC Plus-35100 Titanium Dioxide 75 2.31 White 6 Above 400° I/O HCR Yellow HC Plus-35011 Benzimidazolone Yellow 10 1.01 Yellow 180 350°–400° I/O (MASS) LSR HC Plus-35111 Benzimidazolone Yellow 24 1.49 Yellow 180 350°–400° I/O (MASS) HCR Orange HC Plus-35020 Monoazo Orange 10 1.02 Orange 64 350°–400° I/O LSR HC Plus-35120 Monoazo Orange 25 1.19 Orange 64 350°–400° I/O HCR Red HC Plus-35032 Red Iron Oxide VYS 50 1.60 Red 101 Above 400° I/O LSR HC Plus-35132 Red Iron Oxide VYS 70 2.17 Red 101 Above 400° I/O HCR HC Plus-35031 Special Azoic 15 1.03 Red 187 350°–400° I/O LSR HC Plus-35131 Special Azoic 33 1.33 Red 187 350°–400° I/O HCR Blue HC Plus-35040 3 Phthalocyanine Blue GS 25 1.07 Blue 15 Above 400° I/O LSR HC Plus-35140 3 Phthalocyanine Blue GS 40 1.42 Blue 15 Above 400° I/O HCR HC Plus-35041 Ultramarine Blue 45 1.32 Blue 29 Above 400° I/O LSR HC Plus-35141 Ultramarine Blue 60 1.51 Blue 29 Above 400° I/O HCR Green HC Plus-35050 Phthalocyanine Green 25 1.13 Green 7 Above 400° I/O LSR HC Plus-35150 Phthalocyanine Green 40 1.71 Green 7 Above 400° I/O HCR Violet HC Plus-35033 Quinacridone Red 20 1.04 Violet 19 Above 400° I/O LSR HC Plus-35130 Quinacridone Red 40 1.40 Violet 19 Above 400° I/O HCR Brown HC Plus-35070 Yellow Inorganic - Cr/Sb/Ti Oxide 30 1.26 Brown 24 Above 400° I/O LSR HC Plus-35170 Yellow Inorganic - Cr/Sb/Ti Oxide 60 1.79 Brown 24 Above 400° I/O HCR Black HC Plus-35080 Carbon Black 12 1.03 Black 7 Above 400° I/O LSR HC Plus-35180 Carbon Black 30 1.14 Black 7 Above 400° I/O HCR Copyright © 2024, Avient Corporation.

Predecessors MA Hanna and The Geon Company, over 100 years. 2.0 Management System Registrations For more information regarding our Management System certifications, please refer to our website at http://www.polyone.com/company/sustainability/environmental/global-iso-certificate-library 3.0 Audit PolyOne is open to permitting an audit of PolyOne facilities, subject to: • Advanced notice of minimum thirty (30) days, or as otherwise specified by individual facility’s audit governance. • Audit must be conducted during normal business hours; and • All persons attending the audit may be required to sign a non-disclosure agreement prior to being permitted into PolyOne facilities. Each Sourcing Manager rates vendors on pricing. 4.

Price discrimination. What is Price Discrimination? Unlawful price discrimination can occur when a seller charges one customer one price for a product, but requires another customer who competes with the first to pay a higher price for the same product.

Carbon fiber production took off during the 1960’s but the high price of the material limited its initial usage.

Customers have immediate access to a wide range of formulations with the latest pricing, performance and regulatory information all visible at the beginning of the product development process.

This significantly prolongs the effectiveness of a part’s structural capabilities in humid environments or during short-term water immersion, but at a more economical price point.”

Customers have immediate access to a wide range of formulations with the latest pricing, performance and regulatory information all visible at the beginning of the product development process.

Offers a moderate level of stiffness over the unfilled materials as well as improved drop impact strength. • UL approved • FDA certifiable • Natural, black or colors • High flow grades • UV stabilized • Recycled content • Scratch & mar resistant • UL approved • FDA certifiable • Natural, black or colors • High flow grades • UV stabilized PROPERTY CONDITION UNITS METHOD PRODUCT EXAMPLES 6 Provides the maximum strength and heat resistance among polypropylene compounds. Formulated for underhood automotive HVAC use to minimize unwanted odor while reducing VOC emissions. • Chemically coupled • Natural or black • High flow grades • Provides heat stabilization • Excellent balance of properties • Natural, black or custom colors Product Code - - - PX5430 B1 PX5435 B1 PX5440 B1 PX5450 B1 Reinforcement Type - - - Glass Glass Glass Glass Reinforcement % - % - 30 35 40 50 Specific Gravity 73°F (23°C) - ISO 1183 1.13 1.18 1.23 1.35 Tensile Strength Yield MPa ISO 527 102 105 113 130 Flexural Modulus 73°F (23°C) MPa ISO 178 6500 8000 9400 11,500 Notched Izod Impact 73°F (23°C) kJ/m2 ISO 180 9.4 9.3 11.0 12.0 Heat Deflection 264 psi °C ISO 75 152 152 153 154 Product Code - - - PP5120 B270-LO MFR g/10 min ISO 1133 12 Tensile Modulus MPa ISO 527 3320 Tensile Stress Yield MPa ISO 527 32 Tensile Elongation Yield % ISO 527 4.6 Tensile Elongation Break % ISO 527 17 Flexural Modulus MPa ISO 178 3000 Charpy Impact 73°F (23°C) kJ/m2 ISO 179/1eU 38 Heat Aging 150°C h VW 44045 700 hr VOC µg/g VDA 278 23.5 Fog µg/g VDA 278 30.5 Carbon Emissions µgC/g VDA 277 18 Odor Grade VDA 270 B3 3 • High flow grades • UV stabilized PROPERTY CONDITION UNITS METHOD PRODUCT EXAMPLES INJECTION MOLDING POLYPROPYLENE PROPERTY CONDITION UNITS METHOD PRODUCT EXAMPLES 10 Maxxam™ Filled & Reinforced Polypropylene A range of melt flows to process well in sheet extrusion, thermoforming, profile extrusion and blow molding operations. • FDA certifiable • Scratch & mar resistant • Impact modified • Natural, black or colors • UV stabilized • Chemically coupled EXTRUSION & BLOW MOLDING POLYPROPYLENE Product Code - - - EP6713 B1 EP6130 B10 EP6430 B1 EP5240 B145 EP7920 B1 Reinforcement Type - - - Talc Mineral Glass CaCO3 Glass/ Mineral Reinforcement % - % - 13 30 30 40 20 Specific Gravity 73°F (23°C) - ASTM D792 0.99 1.12 1.12 1.25 1.05 ISO 1183 Tensile Strength Yield psi ASTM D638 4800 4200 10,000 3600 6500 MPa ISO 527 31 29 69 35 45 Tensile Elongation Yield % ASTM D638 6 8 2 5 6 ISO 527 Break % ASTM D638 100 110 5 70 100 ISO 527 Flexural Modulus 73°F (23°C) psi ASTM D790 325,000 360,000 850,000 350,000 400,000 MPa ISO 178 2250 2400 5800 2400 2750 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 4.0 1.5 4.3 1.1 2.4 kJ/m2 ISO 180 20.0 8.0 24.0 6.0 13.0 Heat Deflection 66 psi °F ASTM D648 230 242 315 240 293 °C ISO 75 110 115 157 116 145 264 psi °F ASTM D648 130 158 270 140 212 °C ISO 75 54 68 132 60 100 PROPERTY CONDITION UNITS METHOD PRODUCT EXAMPLES 111.866.POLYONE www.polyone.com EXTRUSION & BLOW MOLDING POLYPROPYLENE Maxxam™ Filled & Reinforced High Density Polyethylene Specifically designed for blow molding and sheet extrusion/thermoforming of structural parts. These materials offer an excellent balance of stiffness, impact resistance and dimensional stability. • FDA certifiable • Natural, black or colors • UV stabilized Product Code - - - PE4125 B1 Reinforcement Type - - - Talc Reinforcement % - % - 25 Specific Gravity 73°F (23°C) - ASTM D792 1.15 ISO 1183 Tensile Strength Yield psi ASTM D638 4050 MPa ISO 527 28 Tensile Elongation Yield % ASTM D638 10 ISO 527 Break % ASTM D638 40 ISO 527 Flexural Modulus 73°F (23°C) psi ASTM D790 270,000 MPa ISO 178 1850 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 3.5 kJ/m2 ISO 180 20.0 Heat Deflection 66 psi °F ASTM D648 190 °C ISO 75 88 264 psi °F ASTM D648 115 °C ISO 75 46 PROPERTY CONDITION UNITS METHOD PRODUCT EXAMPLES 12 www.polyone.com Copyright © 2019, PolyOne Corporation.

EY has been retained as independent registered public accounting firm for PolyOne and its predecessor company, The Geon Company, continuously since 1993. Exercise or Base Price of Option Awards (column (i)) In setting the base price of these SARs, we followed the practice of using our closing stock price on the grant date. Option Exercise Price (column (e)) This column shows the base price for each SAR reported in columns (b), (c) and (d).