Wischodnia 6 99-300 Kutno Poland LaPorte, IN Develop and manufacture silicone colorants, additives, and compounds , 707 Boyd Blvd LaPorte - IN 46350 United States Lehigh Valley, PA Manufacture of Colorants for Plastics , 2513 Highland Avenue Bethlehem - PA 18017 United Massillon, OH Manufacture of Color and Performance Additives , 1675 Navarre Road Massillon - OH 44646 United States Design, Manufacture and Distribution of Thermoplastic Elastomer Compounds , 833 Ridgeview Drive McHenry Design, Manufacture and Distribution of Thermoplastic Elastomer Compounds , 831 Ridgeview Drive McHenry Design, Manufacture and Distribution of Thermoplastic Elastomer Compounds , 921 Ridgeview Drive McHenry Melle, Germany Development and Manufacture of LSFOH (low smoke and fume, zero halogen) compounds Oldendorfer Straße 9 49342 Germany Page 3 of 4 S E s Mountain Top, PA Manufacturing, Shipping and Receiving , 855 Oak Hill Road Mountain Top - PA 18707 United States Oricain (Pamplona), Design and Manufacture of Color and Additive Concentrates and Specialty Compounds Pol.

Our long fiber reinforced Complēt™ moisture resistant nylons, in PA 6 and 6/6 matrices, moderate performance degradation using environmental stabilization. A Complēt moisture resistant nylon 6/6 long glass fiber composite performed similarly to a specialty PA 6/12 material at time intervals equivalent to short-term water exposure and noticeably better than a standard PA 6/6 formulation.

Avient 2023 Proxy Statement Pages 66-72, 75-84 Avient 2023 Proxy Statement Pages 66-72 Avient 2023 Proxy Statement Pages 66-67

Zone 2 - Center 430° F 470° F 221° C 243° C Zone 3 - Front 440° F 480° F 227° C 249° C Nozzle 450° F 480° F 232° C 249° C MELT & MOLD TEMPERATURES ENGLISH (°F) METRIC (°C) COMMENTS Melt Temperature 450° F 480° F 232° C 249° C After processing, always purge residual PKE materials with fractional melt flow HDPE or PP.Mold Temperature 150° F 200° F 66° C 93° C DRYING CONDITIONS ENGLISH (°F) METRIC (°C) COMMENTS Temperature 180° F 82° C Drying not required.

PDI) on extruded profiles 2 ASTM D-638 3 ASTM 256 4 ASTM D-648 66 psi, unannealed, 0.125" 5 Savings depends on profile size and production volume Acrylite is a registered trademark of Evonik Performance Materials Lens Performance Resilience™ LS Frost PVC Acrylite® Satinice Frost PMMA Light Transmission1 at 0.060" (1.5mm) 83% Low Diffusion 78% Medium Diffusion 75% High Diffusion 81% Low Diffusion Diffusion Half Power Angle (DLD) 26° Low Diffusion 41° Medium Diffusion 58° High Diffusion 26° Low Diffusion Tensile Strength2 Tensile Modulus2 Tensile Elongation (break)2 7,360 psi 400,000 psi 20% 7,330 psi 330,000 psi 43% Flammability (UL 94) V-0 @ 1.5mm 5VA @ 2.0mm HB @ 1.6mm Notched Izod Impact (73°F)3 2.3 ft-lb/in 0.6 ft-lb/in Heat Deflection Temperature4 157°F/69°C 182°F/83°C UV Stability Good Excellent Chemical Resistance Excellent Good Typical Lens Profile Cost 10–15% Savings5 Baseline 1.866.POLYONE www.polyone.com Copyright © 2018, PolyOne Corporation.

Renol™ Fiber Colorants Black Colorants for PET and PA Fibers Black polyester and polyamide fibers and filaments are used in a variety of applications, such as automotive textiles, safety belts, apparel, sportswear, carpets and rugs, ropes, and home textiles.

�2��6�&&*��66��1-���-�.�-&����.��1�����$-&�(�4������9����2�����3��$����((�'-.����&�&��.�2(�&�-6&!