The range will be launched at the upcoming SGIA Show in Las Vegas, September 14-16, and will be exclusively available through Ryonet (www.screenprinting.com) on September 14, 2016. Cody Scherer Ryonet® Product Manager +1 360-576-7188 | www.screenprinting.com cscherer@ryonet.com

PE COCKATOO GREEN 14-5420 Material or Material Number) has either 12 or 14 characters. Shipment Notification - under "Material Header" MSDS - labeled as the "Product Number" (in Section 1)

REMAFIN-VIOLETA LIQ 602466-14 Material or Material Number) has either 12 or 14 characters. Shipment Notification - under "Material Header" MSDS - labeled as the "Product Number" (in Section 1)

Longer sprues may require more taper (3° - 5°), as shown in Figure 1. 1, 2 and 4 A fan gate is a streamlined variation of a tab gate (Figure 14).

MARINE PLYWOOD Hammerhead™ panels are three times lighter than marine plywood MOISTURE ABSORPTION % weight change due to water absorption for selected composites and marine plywood 10000 60000 110000 160000 210000 260000 310000 360000 0.5 0.75 1 1.25 1.5 F le x u ra l R ig id it y - lb / in 2 Panel Thickness - in Hammerhead™ 5.3lb/in^3 Core Density Hammerhead™ 8.4lb/in^3 Core Density Plywood — Hammerhead™ 5.3 lb/ft3 Core Density — Hammerhead™ 8.4 lb/ft3 Core Density — Marine Plywood 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 0 10 20 30 40 50 60 70 80 90 100 % W e ig h t C h a n g e Immersion Time - Days .50" Hammerhead™ .75" Hammerhead™ 1" Hammerhead™ 1.50" Hammerhead™ .50" marine plywood .75" marine plywood 1" marine plywood Fl ex ur al R ig id ity - lb -in 2 INSTALLATION INSTRUCTIONS CUTTING & DRILLING Recommended blade: Industrial fine cut-off saw blade, 10" x 80 teeth 38° ATB grind with 5/8" bore, PTFE coating Recommended router bits: 3/8" diameter, 4 flute TiAlN (titanium aluminum nitride) coated carbide bit FORMING Apply localized 400˚F heat at a length proportional to the panel thickness (see equation below) and bend to shape. Heat Length = π 2 * Thickness Radius = S B S T = 400°F B S GL AS S/ EP OX Y TA B M AT ER IA L TAB TESTING OF VARIOUS INSTALLATION METHODS Hammerhead™ PETG Laminate Hammerhead™ PETG Laminate BOTTOM PANEL LEG LENGTH BREAK STRENGTH (LBS) PETG Skins with Plywood Core 1 in 1.5 in 2 in 2400 2820 2748 Hammerhead™ with 5.3 lb/ft3 Core Density 2 in 665 Hammerhead™ with 8.4 lb/ft3 Core Density 2 in 1084 Marine Plywood 2 in 770 Glass/Epoxy with Plywood Core 2 in 1055 Glass/Polyester with Balsa Core 2 in 919 L-Bracket Installation Hammerhead™ PETG Laminate Hammerhead™ PETG Laminate BOTTOM PANEL LEG LENGTH BREAK STRENGTH (LBS) PETG Skins with Plywood Core 2 in 2375 Marine Plywood 2 in 770 Glass/Polyester with Balsa Core 2 in 797 U-Channel Installation N O T AB BOTTOM PANEL LEG LENGTH BREAK STRENGTH (LBS) Hammerhead™ with 5.3 lb/ft3 Core Density 2 in 420 Hammerhead™ with 8.4 lb/ft3 Core Density 2 in 332 Marine Plywood 2 in 984 Glass/Polyester with Balsa Core 2 in 1298 Hammerhead™ with 5.3 lb/ft3 Core Density - ITW Plexus MA420 Adhesive NA 501 Hammerhead™ with 8.4 lb/ft3 Core Density - ITW Plexus MA420 Adhesive NA 1156 Hammerhead™ with 8.4 lb/ft3 Core Density - Crestomer 1152PA Adhesive NA 1530 Hammerhead™ with 8.4 lb/in3 Core Density - Crestomer M1-30 Adhesive NA 1471 Mixed Conditions ITW Plexus MA420 adhesive was used in all tab testing installations except where noted. BOTTOM PANEL LEG LENGTH BREAK STRENGTH (LBS) Hammerhead™ with 5.3 lb/ft3 Core Density 2 in 420 Hammerhead™ with 8.4 lb/ft3 Core Density 2 in 332 Marine Plywood 2 in 984 Glass/Polyester with Balsa Core 2 in 1298 Hammerhead™ with 5.3 lb/ft3 Core Density - ITW Plexus MA420 Adhesive NA 501 Hammerhead™ with 8.4 lb/ft3 Core Density - ITW Plexus MA420 Adhesive NA 1156 Hammerhead™ with 8.4 lb/ft3 Core Density - Crestomer 1152PA Adhesive NA 1530 Hammerhead™ with 8.4 lb/in3 Core Density - Crestomer M1-30 Adhesive NA 1471 ADHESIVE DESCRIPTION ADHESIVE GRADE MANUFACTURER AVERAGE BOND STRENGTH (PSI) STANDARD DEVIATION FAILURE MODE BEST ADHESION 2k Urethane 75421 Lord 2281 184 Substrate Cohesive 2k Acrylic SA1-705 GRY1 AccraLock 2211 78 Substrate 2k Acrylic Plexus MA420 ITW 2171 262 Substrate 2k Acrylic SA10-05 Blk1 AccraLock 2102 138 Substrate 2k Urethane 75451 Lord 2047 68 Cohesive 2k Acrylic SA1-705 GRY 1:2 AccraLock 1966 68 Substrate 2k Acrylic Scotchweld 8010 3M 1907 61 Adhesive Cyanoacrylate Gorilla Glue Gorilla Glue 1885 432 Cohesive 2k Acrylic Crestabond PP-04 Scott Bader 1873 281 Substrate 2k Acrylic SA10-05 Blk 10:2 AccraLock 1779 127 Cohesive 2k Urethane 75422 Lord 1716 190 Cohesive Adhesive 2k Urethane 75452 Lord 1535 98 Adhesive 2k Methacrylate Polyfuse Icon Containment 1610 98 Adhesive INTERMEDIATE ADHESION 2k Acrylic FA10-05 Blk C010817 AccraLock 724 58 Cohesive 2k Acrylic FA10-05 Blk1 AccraLock 722 44 Cohesive 2k Epoxy Loctite Epoxy Instant Mix Loctite 508 81 Adhesive 2k Epoxy Gorilla Glue Epoxy Gorilla Glue 341 198 Adhesive NOT RECOMMENDED 2k Epoxy Loctite Epoxy Marine Loctite 0 0 No bond ADHESIVE SELECTION Brands identified are owned by the manufacturers of the adhesive products. 1 surface sanded with 220 grit scuff prep 2 surface primed with 459T FASTENER TYPE BENEFITS CONSIDERATIONS Through-Bolting Best mechanical locking system Need back side access to panel Screw-In Anchor Highest pullout strength Requires pilot hole Cup Washer Spreads compressive load Requires relief hole; For substructure and hard point attachment Wide Grip (Bulb-Style) Rivet Ease of use—no installation torque limitations For lower load attachments Sheet Metal or Wood Screw Readily available, low cost Penetrate both skins for improved pullout Shoulder Washer Limits compressive load Requires relief hole; For substructure and hard point attachment For more information on installation, adhesives, and fasteners for specific applications, please contact Avient.

LIQUID ADDITIVE NUAGE 1 LIQUID ADDITIVE 480-30616-1 Material or Material Number) has either 12 or 14 characters.

Certificate - ISO 9001 - Avient Corporation - 337726 - 23521672 (1).pdf

December 4 1) Attachment 4

October 14, 2014 PolyOne is exhibiting at the Fakuma trade show from October 14-18.

Versaflex TF TPE Solutions for Textile Fabric Product Bulletin_CN 4.11-1 用于纺织面料的 Versaflex TF 热塑性弹性体（TPE）热熔胶 随着消费者越发注重健康，市场对于功能性 强、轻便舒适且具有视觉吸引力的健身产品需 求正稳步增长。 全新解决方案赋予织物出色的强度和回 弹性，可使织物在持续1分钟拉长300%的情况 下，实现99%的形状复原。