Available in four overmolding grades compatible with polypropylene (PP), and one grade that is suited for overmolding onto ABS, all grades are formulated for durability, delivering property retention and UV resistance comparable to traditional TPEs. Peel (N/mm) 3.2 2.9 3.2 3.2 3.1 3.2 3.1 Failure Mode Cohesive Cohesive Cohesive Cohesive Cohesive Cohesive Cohesive KEY PROPERTIES AND OVERMOLD PERFORMANCE reSound™ OM 5510 grades for overmolding onto PP and reSound OM 5520 for ABS reSound OM 5510-30N reSound OM 5510-45N reSound OM 5510-60N reSound OM 5510-70N reSound OM 5520-55N Bio-derived Content (%) 40% 40% 50% 50% 49% Hardness, Shore A 30 45 60 70 54 Specific Gravity 0.88 0.88 0.89 0.89 0.95 50% Modulus, PSI 96 153 247 384 258 100% Modulus, PSI 137 251 343 462 353 Tensile Strength, PSI 264 438 625 608 637 Elongation, % 280 215 306 271 319 Tear Strength, PLI 58 84 109 132 146 OM Substrate PP PP PP PP ABS OM Avg. Peel, PLI 12 19 23 20 19 reSound OM 5510 for PP reSound OM 5510-60N Room Temperature 70C Bio-derived Content (%) 50% 50% 50% 50% 50% 50% 50% Hardness, Shore A 60 60 60 60 60 60 60 Specific Gravity 0.89 0.89 0.89 0.89 0.89 0.89 0.90 50% Modulus, PSI 247 241 244 251 234 244 240 100% Modulus, PSI 343 333 338 339 321 331 326 Tensile Strength, PSI 625 621 647 610 633 662 642 Elongation, % 306 314 309 313 312 315 315 Tear Strength, PLI 109 108 113 113 111 117 115 reSound OM 5520-55N Room Temperature 70C Bio-derived Content (%) 49% 49% 49% 49% 49% 49% 49% Hardness, Shore A 54 54 55 55 54 55 56 Specific Gravity 0.95 0.95 0.96 0.96 0.95 0.96 0.96 50% Modulus, PSI 258 256 256 265 266 271 257 100% Modulus, PSI 353 355 357 362 373 379 367 Tensile strength, PSI 637 615 637 669 651 674 642 Elongation, % 319 315 319 333 313 319 315 Tear Strength, PLI 146 136 133 142 137 138 141 reSound OM 5510-45N Room Temperature 70C Bio-derived Content (%) 40% 40% 40% 40% 40% 40% 40% Hardness, Shore A 45 46 47 46 46 45 45 Specific Gravity 0.88 0.89 0.89 0.89 0.89 0.89 0.90 50% Modulus, PSI 153 158 154 162 137 136 133 100% Modulus, PSI 251 259 259 261 226 222 218 Tensile Strength, PSI 438 481 451 495 417 470 486 Elongation, % 215 240 211 243 204 227 238 Tear Strength, PLI 84 81 87 82 83 85 84 AGING – PROPERTY RETENTION • Tested at room temperature and 70° C for comparison • Hardness, tensile strength elongation and modulus showed great retention Overmolding onto PP Overmolding onto ABS RHEOLOGY Suitable for injection molding and overmolding 1.0 10 100 1000 10000 100000 10.0 100.0 1000.0 reSound OM 5510-30N reSound OM 5510-45N reSound OM 5510-60N reSound OM 5510-70N Shear Rate, 1/s Ca pi lla ry V is co si ty , P a* s 1.0 10 100 1000 10000 100000 10.0 100.0 1000.0 reSound OM 5520-55N Shear Rate, 1/s Ca pi lla ry V is co si ty , P a* s Capillary viscosity at 200°C Capillary viscosity at 200°C reSound OM 5510 for PP reSound OM 5520 for ABS www.avient.com Copyright © 2020, Avient Corporation.

MEVOPUR COLORANTS • Standard colors in PP and PE to shorten time-to-market • Custom colors matched to Pantone, RAL or other color reference • White colorants for pharmaceutical packaging for LDPE, HDPE and PP with opacity to reach USP chapter MEVOPUR FUNCTIONAL ADDITIVES • Antistatic formulation with good flow/impact for injection molding • Amide- and amine-free antistatic for film in contact with API (Active Pharmaceutical Ingredients) • UV blocking for transparent PP and PE packaging to meet USP chapter • Non-migrating friction reduction/processing aid for PE and PP • Laser marking/welding additive for fast, reliable marking/assembly • MVTR (Moisture Vapor Transmission Rate) reduction for HDPE to improve shelf-life • Thermal protection of the polymer during processing • Gamma/e-beam sterilization protection for PP (up to 50kGy) with color compensation for reduced yellowing REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Drug Master File (Type III) and/or Device Master File • Food contact established with FDA/EU* APPLICATION BULLETIN * FDA/EU compliance information available upon request Bormed™ is a registered trademark of Borealis Healthcare use limitations apply—see below.

Building on the design concept from SurfCo, Avient conducted additional R&D work to formulate a specialty thermoplastic elastomer (TPE) that could be coextruded with polypropylene (PP) film and meet the high expectations of SurfCo and surfers everywhere. The customized TPE offered excellent hydrophobic qualities and similar melt strength to PP while still maintaining its key mechanical properties.

Did you know that with the right formulation, you can achieve properties that are as good or better than that of PA 6,6 using materials such as PA 6, PK, PBT/PET, PP, polymer blends and even post-industrial recycled blends? HOW ALTERNATIVE POLYMERS COMPARE TO PA 6,6 PA 6 | POSSIBLE APPLICATIONS: Automotive, Industrial, Consumer & Sporting Goods Wider processing temperature range Better surface quality Better weathering resistance Shorter conditioning time—nearly half that of PA 6,6 Lower temperature resistance Slightly lower chemical resistance Higher water absorption Lower stiffness/wear resistance PK | POSSIBLE APPLICATIONS: Automotive, Consumer & Sporting Goods, Industrial, Electrical & Electronics Lower CO2 emissions in production Better hydrolysis and chemical resistance Comparable dimensional stability Inherently lubricious for reduced wear and friction Easier to mold Cost competitive Lower short- and long-term thermal performance Harder to color More limited process window PBT/PET | POSSIBLE APPLICATIONS: Electrical & Electronics Lower water absorption Slightly higher rigidity/stiffness (for PBT) Better abrasion resistance Slightly better electric resistance Lower toughness properties Higher density Lower short- and long-term temperature resistance Lower hydrolysis resistance PP | POSSIBLE APPLICATIONS: Automotive, Consumer Goods, Lightweighting Applications Lower water absorption Slightly better chemical resistance Lower density Cost effective Fiber reinforced PP can achieve similar or better mechanical properties to PA 6,6 GF30 Reduced rigidity/stiffness Much lower abrasion resistance Lower electric resistance Reduced short- and long-term temperature resistance PC/PBT & PC/PET BLENDS | POSSIBLE APPLICATIONS: Automotive Interiors, Consumer Goods, Household Appliances Higher impact strength Good scratch resistance Good wear resistance Lower mechanical properties Higher brittleness Narrow processing temperature range PA 6,6/PET BLENDS | POSSIBLE APPLICATIONS: Automotive, Industrial, Appliance, Electrical & Electronics, Applications Where Low Water Absorption is Required Reduced water absorption—up to 40% Slightly higher mechanical properties in the conditioned state Slightly lower temperature resistance Slightly lower chemical resistance Narrow processing temperature range PA/PP BLENDS | POSSIBLE APPLICATIONS: Automotive Interiors, Electronics, Consumer & Sporting Goods Good adhesion to polyolefin-based TPEs Low permeability of water Good processability Lower density Lower temperature resistance Lower mechanical properties POST-INDUSTRIAL RECYCLED SOLUTIONS (PA 6,6/PA 6/PP) | POSSIBLE APPLICATIONS: Automotive Accessories, Industrial, Consumer & Sporting Goods Between 50-80% recycled content Good processability Cost effective Reduced chemical resistance Wider range of mechanical specifications Potential for slightly lower mechanical properties 1.844.4AVIENT www.avient.com Copyright © 2024, Avient Corporation.

POLYMER PRODUCT NAME PROPERTY PERFORMANCE TYPE DOSAGE/ LDR MATERIAL CODE ABS FRABS92991 UL 94 Halogen 35% CC10292991WE ABS FRABS52399 UL 94 Halogen 5–14% CC10252399WE HDPE Cesa Flam MB 5101AH UL 94 Halogen 7–16% PEAN698479 Nylon Cesa Flam MB 5728H UL 94 Halogen 8–14% ABA0698450 Nylon Cesa Flam MB 5731NH UL 94 Non-halogen 8–20% ABAN698410 PC Cesa Flam NCA0820018NH UL 94 Non-halogen 2–4% NCA0820018 PC NCAN-Z0N-FN FLMRET 698419 UL 94 Non-halogen 3–8% NCAN698419 PE FRPE94802 ASTM E84 Non-halogen 100% CC103094802F PE FRPE41011 UL 94 Halogen 20–30% CC1034101160 PET Cesa Flam MB 5525NH UL 1441, UL 94 Non-halogen 6–8% NEAN698534 PET FRPET65462 UL 94 Non-halogen 5–12% CC103265462F PET/ PBT Cesa Flam MB 5532NH NFPA 701 Non-halogen 4–6% NBAN698451 PP Cesa Flam MB 5201H UL 94 Halogen 6–30% PPAN698410 PP Cesa Flam MB CT-1629NH Cal TB 133, UL 94 Film, NFPA 701 Non-halogen 6–8% PPAN698428 PP FRPP365370 UL 94 Non-halogen 10–20% CC103653702F PP Copolymer FRPP37654 UL 94 5VA Halogen 100% CC10337654WE PP Copolymer FRPP53484 UL 94 Halogen 10% CC1035348460 PS FRPS62722 ASTM E84 Halogen 2–4% CC10262722WE PS/HIPS Cesa Flam SLA0820014H UL 94 Halogen 4–8% SLA0820014H TPU Cesa Flam 98461NH UL 94 Non-halogen 6–14% RUA0698461 F-SERIES FLAME RETARDANT ADDITIVES HDPE/PE F-Series UL 94 Non-halogen 10–25% PEA0820024 PE F-Series UL 2335, FM 4998 Non-halogen 10–25% PEA0820069

Just a few months ago, we completed the acquisition of the Clariant Masterbatch business, the largest acquisition in the 20-year history of our company. Our free cash flow supports shareholder value creation through investing in R&D for organic growth, completing bolt-on acquisitions, and returning cash to shareholders via our dividend program and opportunistic share repurchases. 18 1. With the Clariant Masterbatch acquisition and divestment of the PP&S business, our exposure is now concentrated in less-cyclical and high-growth markets, with increased geographic diversification and a more specialized portfolio that can significantly expand EBITDA margins. 21 1.

FUNCTIONALITY TARGET APPLICATIONS BLOOD COLLECTION REAGENT CONTAINERS/ KITS PIPETTE/ LABWARE SELF-TESTING/ POCT INSTRUMENT/ ACCESSORIES Colorants for coding for lab automation/ identification Wide range of colors in various polymers, available in ready-to-use formulation or concentrate adapted to your process Colors – low migration/ interference Ready-to-use formulation to avoid interference with analytical tests; extractable metal data    Colors – biologically evaluated Reduced risk of non compliance to current and proposed regulations such as IVDR     Color in PP, ABS, PC and high temperature polymers with UL listings Ready-to-use solutions/concentrates supporting Underwriters Laboratory requirements of electric enclosures Antistatic for PP, ABS, PC/ABS Permanent/non-migrating ready-to-use formulation; fast decay time independent of % relative humidity Clarifying PP Sorbitol-free, minimizing potential migration   Laser marking for UDI replacing ink printing/labels Activation of the polymer to laser energy give high contrast solvent-free, high speed identification Laser welding for fast, reliable assembly of a range of polymers Custom concentrates and ready-to-use formulations for optically transparent and opaque colors while allowing laser transmission/absorption    Nucleation of semicrystalline polymers e.g. HDPE, PP, POM Fast acting new generation nucleant for PE and PP; improved dimensional stability, thermal and mechanical properties  Protection from moisture for improved barrier Reduced Moisture Vapor Transmission Rate (MVTR) HDPE ready-to-use formulation; moisture absorbing concentrates Protection from oxygen scavenging in PET Reduced transmission of oxygen vacuum loss in BCT (blood collection tubes) and protect reagents from oxygen degradation Protection from UV in transparent containers (PP, PE, PETG, COP) UV blocking in 290–450nm with no impact on clarity; protection of light sensitive reagents Copyright © 2022, Avient Corporation.

MagIQ_Non-Woven_Electret_Plus_Product_Bulletin-CN MagIQ™无纺驻极添加剂 应用于防护口罩的功能性母料 口罩组成 结构 材料 方法 功能 S（纺粘） 外层 PP M（熔喷） 中间层 PP S（纺粘） 外层 PP 纺粘无纺布 防水、防止飞沫粘附 熔喷无纺布 过滤空气中微生物、颗粒和飞沫 纺粘无纺布 吸水、吸收呼吸产生的水蒸气 驻极母粒是一种应用于生产聚丙烯熔喷无 纺布的材料，可用于制作具有持久过滤性 能的防护口罩。

Product Name H15 H XF V2 70 MF5200-5004 NHFR V2 HS MF5200-5005 NHFR V2 RS H MF5200-5006 NHFR V2 RS HS H6 H XF H20 H XF H6 T/05 H XF H6 T/10 H XF H6 T/20 XF H6 GF/10 XF V070 H8 GF/20 XF H12 GF/25 H XF V0 70 H6 GF/30 XF PE H XF Polymer PP PE Flammability V2 V2 V2 V2 V0 V0 V0 V0 V0 V0 V0 V0 V0 V0 UL Listed No No No No No No No No No No No No No Yes Reinforcement Unfilled Unfilled Talc Talc Unfilled Unfilled Talc Talc Talc Glass Filled Glass Filled Glass Filled Glass Filled Unfilled Density (g/cm3) 1.03 0.9 0.98 1.05 1.07 1.06 1.08 1.15 1.16 1.11 1.25 1.32 1.35 1 MFI, 230°C/2.16 kg 13 20 23 20 5.5 20 6 6 6 6 7 12 5.5 E-Modulus (Tensile Modulus - Mpa) 1900 1500 2400 2600 2500 2500 2500 3000 3000 4300 6500 7500 8250 2000 Tensile Strength (Mpa) 25 30 32 30 26 20 26 25 23 55 70 75 78 20 Elongation (%) Product Name C10 XF V2 70 C10 H XF C10 H XF V0 T C10 T/10 XF C10 T/20 XF C6 GF/30 H XF C2 GF/20 XF C6 GF30 H UV XF V0 70 GREY X2 70 GREY X3 70 Resin Chemistry COPO HOMO + COPO Polymer PP Flammability V2 V0 V0 V0 V0 V0 V0 V0 V0 V0 UL Listed No No No No No Yes No No No No Reinforcement Unfilled Unfilled Unfilled Talc Talc Glass Filled Glass Filled Glass Filled Glass Filled Glass Filled Density (g/cm3) 1.01 1.06 1.09 1.16 1.28 1.35 1.23 1.38 1.24 1.25 MFI, 230°C/2.16 kg 7 10 10 9 10 4.5 2.5 4.5 4 0 E-Modulus (Tensile Modulus - Mpa) 1800 1500 1300 1500 2400 8000 5000 8000 5250 6000 Tensile Strength (Mpa) 18 15 20 15 15 60 45 60 40 45 Tensile Strain at Break (ISO 527-2) (%) 63 We also provide options for custom formulations using recycled polypropylene (PP) and polyethylene (PE). 1.844.4AVIENT www.avient.com Copyright © 2025, Avient Corporation.

One example is such a blend is SEBS with polypropylene (PP). PP is compatible with midblock of SEBS. Figure 1 shows the TEM of two of SEBS/oil/PP compound (1).