Compatible with a broad range of materials, including:  •    Polypropylene •    Polyethylene •    Ionomer-based chemistries •    PVC •    Acrylics •    Engineered thermoplastics

During the injection-molding step, the TPE insert forms a strong bond with the substrate, such as polypropylene or polyethylene, used for the container closure.

Hiformer™ Clearview™ Clarifiers For Polypropylene

Maxxam™ formulations are based on polypropylene and polyethylene resins and can be filled and reinforced to satisfy the required performance characteristic.

Suitable for use in polyethylene (PET) and polypropylene (PP) as well as in rPET and rPP applications

Enhance the properties of spun-dyed polyester, polyamide and polypropylene.

Polypropylene

Most Dynaflex® (Styrenic block copolymer TPE), Versaflex® (polar modified alloys) and Versalloy® (TPV alloy compounds are suitable for two-shot or insert molding with a polypropylene (PP). As an example, a styrenic TPE or an olefinic TPE molded on to polypropylene as the substrate can have an interface. TPEs in Table 4 are styrenic materials where as TPVs are the dynamic vulcanizates of polypropylene and EPDM.

https://www.avient.com/products/long-fiber-technology/long-fiber-technologies/onforce-long-glass-fiber-reinforced-polypropylene-composites Default Section Slide 1: Automotive Molder tier 1

INDUSTRY BULLETIN STANDARD UNITS ONFLEX LO 7120-45N Volatile Organic Compounds VDA 278 ug/g(ppm) 41 Fogging VDA 278 ug/g(ppm) 521 Odor • Control • Dry conditions • Wet conditions SAE J1351 (15) 1-10 Scale 1 2 1 Compression Set (23°C) • 22 hours • 70 hours ASTM D395 % 14.4 14.6 Capillary Viscosity • 1341/s • 11170/s ASTM D3835 Pa*s 35 7 HVAC SYSTEMS OnFlex™ LO • Features: low VOC/FOG, low odor, good compression set, easy processing, overmolds to polypropylene • Example applications: seals and flaps in heating, ventilation and air conditioning systems CHARACTERISTICS ONFLEX ™ LO ONFLEX™ AF TPE GENERAL PURPOSE TPV TPO Volatile Organic Compounds (VDA 278) Very Low Moderate Moderate Moderate Very Low Fogging (VDA 278 & DIN 75201) Very Low Moderate Moderate High Very Low Odor (VDA 270 Requirement ≤3.0) ≤3.0 ≤3.0 >3 >3 ≤3.0 Gloss Level Low Low Low Very Low High Tactile Feel Grippy Grippy Grippy Grippy Waxy Pre-Drying Required No No No Yes No Raw Material Costs $$ $$ $$ $$$ $ Compression Set @ RT Good Good Good Excellent N/A Compression Set @ ≥70°C Moderate Moderate Moderate Good N/A UV Resistance Good Excellent Good Good Good Weatherability Good Excellent Good Good Good Hardness Range Low to High Low to High Low to High Low to High High Density (g/ml) 1.15 0.99 0.90–1.20 0.95–0.98 0.90–1.20 GENERAL CHARACTERISTICS COMPARING TPE, TPV, TPO Grades shown on both pages are representative of solutions manufactured in North America, more grades available globally. INTERIORS/EXTERIORS TEMP STANDARD UNITS ONFLEX AF 7210-40B ONFLEX AF 7210-50B ONFLEX AF 7210-60B ONFLEX AF 7210-70B ONFLEX AF 7210-80B QUV Exposure • 1000 Hrs(0.68 W/m2 @ 340nm) • 2000 Hrs(0.68 W/m2 @ 340nm) 45°C ΔE 0.49 0.38 0.42 0.48 0.21 0.85 0.22 0.14 0.32 0.24 Xenon-Arc Exposure • 1000 Hrs(0.35 W/m2 @ 340nm) 63°C ΔE 0.63 0.84 0.34 — 0.58 Capillary Viscosity • 1341/s • 11170/s ASTM D3835 Pa*s 60 11.4 79 15 65 13 48 13.7 73 16 Ozone Resistance ASTM D1149(16) B Visual No cracks No cracks No cracks No cracks No cracks Low Temperature Brittleness ISO 812 B °C -63 -62 -62 -62 -62 OnFlex™ AF • Features: long-term sealing performance, reduced noise and vibration, grippy feel, low gloss, low odor, excellent UV resistance and weatherability, easy processability, overmolds to polypropylene • Example applications: trays, door pockets, fasteners, clips, roof rack pads, roof and door trim, and window encapsulations The need to innovate is virtually endless.