11.866.POLYONE www.polyone.com MAXXAM™ FILLED & REINFORCED POLYOLEFINS PRODUCT SELECTION GUIDE 2 31.866.POLYONE www.polyone.com MAXXAM™ FILLED & REINFORCED POLYOLEFINS PolyOne manufactures a complete line of filled and reinforced polymer polyolefins for injection molding and blow molding. This family of polypropylene- and polyethylene- based products is an ideal performance driven alternative to highly engineered polymers across a variety of industries. Lightweight solution for parts typically manufactured in metal, long glass fiber polypropylene or reinforced engineered plastics.

WHAT WE DO: MATERIAL SCIENCE 4 CUSTOM FORMULATION We sell solutions not commodities. Our exceptional polymer scientists and design engineers are integral to their product development process. 29 We are a specialty formulator that enables many of the world’s products through innovation and custom solutions.

WHAT WE DO: MATERIAL SCIENCE CUSTOM FORMULATION We sell solutions not commodities. Our exceptional polymer scientists and design engineers are integral to their product development process. 34 We are a specialty formulator that enables many of the world’s products through innovation and custom solutions.

FL.Datasheet StrengthMembers.indd FIBER OPTICAL CABLES Key Features • Dielectric strength members • Sizes Available: 0.175 mm – 18.00 mm • Available Forms: Flat, Twisted, Cords, Rovings, & Jacketed • Shapes: Flat or round FIBER-LINE® FIBERS FOR STRENGTH MEMBERS • Kevlar® Para-Aramid • Vectran® Liquid Crystal Polymer (LCP) • Zylon® Polybenzyloate (PBO) • Carbon Fiber • Ultra High Molecular Weight Polyethylene (UHMWPE) • PET Polyester • Fiberglass • Nylon Polyamide • Technora® FIBER-LINE® PERFORMANCE ADDING COATINGS • FIBER-LINE® Wearcoat™: Abrasion Resistance* • FIBER-LINE® Bondcoat™: Ahdesion Promotion* • FIBER-LINE® Protexcoat™: UV Protection* • FIBER-LINE® Colorcoat™: Color Identification* • FIBER-LINE® Swellcoat®: Water Absorbing Protection* • FIBER-LINE® Swellcoat®Blocker: Block Water Migration* FIBER-LINE® PRODUCTS W/ STRENGTH MEMBERS • Strength members in cables • Steel replacement Overview FIBER-LINE® develops, produces, and markets a full line of high performance strength members. STRENGTH MEMBERS FIBERS PROCESSES PRODUCTS FIBER OPTICAL CABLES Key Features • Dielectric strength members • Sizes Available: 0.175 mm – 18.00 mm • Available Forms: Flat, Twisted, Cords, Rovings, & Jacketed • Shapes: Flat or round FIBER-LINE® FIBERS FOR STRENGTH MEMBERS • Kevlar® Para-Aramid • Vectran® Liquid Crystal Polymer (LCP) • Zylon® Polybenzyloate (PBO) • Carbon Fiber • Ultra High Molecular Weight Polyethylene (UHMWPE) • PET Polyester • Fiberglass • Nylon Polyamide • Technora® FIBER-LINE PERFORMANCE ADDING POLYMER JACKETS • LDPE, MDPE, HDPE** • PP** • ETFE** • Polyurethane** • PVC** • PFA** • PVDF** • EPC** Overview FIBER-LINE® develops, produces, and markets a full line of high performance strength members. K58220T N/A Kevlar® 2480 LBs (1125 KGs) 230 FT/LB (154 M/KG) Flat 2.81 mm N/A Strength member in cable application Product ID Polymer Jacket Base Fiber Break Yield Geometry Nominal Diameter Description 13.75mm K/Hytrel Hytrel Jacket Kevlar® 29000 LBs (13154 KGs) 138 KGs/KM Round 13.75mm Kevlar rope w/ Hytrel 12.5mm K/TPU TPU jacket Kevlar® 24000 LBs (10885 KGs) 115 KGs/KM Round 12.5mm Kevlar rope w/ Hytrel 7.87mm K/MDPE MDPE Jacket Kevlar® 24000 LBs (10885 KGs) 50 KGs/KM Round 7.87mm Kevlar w/ MDPE .58mm C/PU TPU jacket Carbon 74 LBs (33.6 KGs) N/A Round/ Flat .58mm Carbon w/ TPU 4.50mm K/HDPE HDPE jacket Kevlar® 2000 LBs (907 KGs) 16 KGs/KM Round 4.06 mm Kevlar w/ HDPE POPULAR JACKETED STRENGTH MEMBERS This data is provided for informational purposes only, and does not constitute a specification.

Purchase price multiple rapidly declining on strength of business and synergy capture 10 $133 $205 2019PF 2021 10 Clariant Color EBITDA Growth Purchase Price Multiple 10.8x 7.0x 6.1x 2019PF 2021 2021 w/ Full Synergies 11.9% 16.2% 2019PF 2021 EBITDA Margins CLARIANT COLOR: TRANSFORMATIONAL ACQUISITION (1) Financial information is pro forma to include a full year of Clariant Color business ($ millions) Initial Synergy Estimate 2021 Synergy Realization Total Synergies Expected Administrative $ 18 $ 29 $ 40 Sourcing 24 20 24 Operational 18 5 21 Total Synergies $ 60 $ 54 $ 85 CLARIANT COLOR INTEGRATION & COST SYNERGIES UPDATE 11 • Integration going extremely well: synergy target increased to $85 million at December 9th Investor Day • Relentless focus on guiding principles of safety first, employee collaboration and exceeding customer expectations • Future revenue synergies are not part of these estimates and represent additional growth over the long term SUSTAINABILITY FOR A BETTER TOMORROW • Revenue from sustainable solutions grew 16% in 2021 and expected to grow 8-12% in 2022 as our innovation efforts and collaboration with customers accelerates • Investments centered around innovation and global sustainability megatrends o Enabling a circular economy – Technologies that allow for increased use of post-consumer recycled (PCR) material and improve recyclability of plastics o Light-weighting – Composites and CAI applications to reduce weight and material requirements, which minimize energy and carbon emissions o Eco-Conscious – Health and human safety applications as well as Avient’s alternative materials to replace lead, PVC, halogens, BPA and other less eco-friendly options *Avient Sustainable Solutions definitions aligned with FTC 2012 Guide for the Use of Environmental Marketing Claims (“Green Guides”) **2020 is Pro Forma to include full year of the Clariant Color business 2016 2017 2018 2019 2020PF** 2021 $405M $455M $550M $790M Revenue From Sustainable Solutions* 2016-2021 $915M $340M PEOPLE C U L T U R E I S E V E R Y T H I N G Community Service 7x Safer than Industry Average World-Class Safety Leadership Development Over $16 million raised since 2010 Diversity & Inclusion 13 Q4 2020 $997 $80 Sustainable Solutions 23 12% 8 Healthcare 53 43% 9 Composites 7 22% 2 Growth in Asia / LATAM 14 10% 3 Other 118 23% 2 Sub-total $1,212 22% $104 Wage Inflation and Overtime (11) Other Supply Chain Costs (4) Synergies 9 Incentives, FX, Other Employee Costs (10) (13) Q4 2021 $1,202 21% $85 Q4 2021 SALES AND OPERATING INCOME 14 Sales Growth Rate Operating Income$ millions Q4 EBITDA BRIDGE 15 Price increases more than offsets raw material and supply chain impacts Q4 2020 $ 118 Demand - $ millions CAI: Price / Mix 62 Inflation (45) SEM: Price / Mix 25 Inflation (20) Distribution: Price / Mix 114 Inflation (109) Net Price Benefit 27 Wage Inflation and Overtime (11) Other Supply Chain Costs (4) Synergies 9 Incentives, FX, Other Employee Costs (13) Q4 2021 $ 126 Transportation (5)$ Outdoor High Performance (3) Other 8 Total Demand - Q4 2021 SEGMENT PERFORMANCE 16 $526 $581 SEM Distribution $58 $61 + 11% + 6% $305 $425 $18 $22 + 39% + 22% $191 $228 $30 $29 + 19% - 3% 2022 O U TLO O K REVENUE GROWTH DRIVERS Growth Drivers Long-Term Growth Rate 2022E Growth Rate Sustainable Solutions 8–12% 12% Healthcare 8–10% 10% Composites 10% 3% Asia / LATAM 5% 6% Other (GDP growth) 2–3% 2–3% Avient 6.5% 6% 18 Excluding Outdoor High Performance 13% (7.5% excl. 29 We are a specialty formulator that enables many of the world’s products through innovation and custom solutions. We will deliver for our stakeholders through multiple value creation levers—many of which are unique to Avient: o Demand for sustainable solutions, healthcare, and composites, together with Clariant Color revenue synergies, that will drive long-term revenue growth in excess of GDP o Clariant color cost synergy capture will result in significant near-term benefit In addition, we remain committed to increasing annual dividends in line with earnings growth and opportunistically buying back shares, all while remaining modestly levered.

Added to the feed throat and designed to increase the polymer chain length via reactive extrusion, rePrize enables an increase in both the polymer intrinsic and melt viscosity. FEATURE BENEFIT • Liquid technology • More accurate dose control • Less variation in melt flow and product IV • Can be coupled to an on-line rheometer • Shorter transition times • Does not require pre-drying • Less dust • Higher IV in melt phase • Improved uniformity when replacing virgin PET in PCR sheet • Eliminate/reduce solid phase polymerization (rPET) • Increased use of post consumer flake or re-grind (Sheet) • Reduced brittleness, less breakages and scrap • More consistent melt flow • Reduced cost • Higher productivity • Cleaner working environment PROCESS HIGHLIGHTS • Higher productivity • Cleaner working environment • New product designs and applications • Improved shelf appeal PET SHEET • Increases final IV • Less variation in product IV • More consistent melt flow • Increased use of flake or regrind • Shorter transition times • Reduced scrap • Reduced dust • Improved impact strength • Improved low temperature performance • Improved aesthetics Information and photographs supplied by Sunwell Global Ltd • Higher productivity • Improved sustainability • Lighter weight, higher strength • Properties comparable to PS packaging • Recyclable PET MONO/MULTI LAYERED SHEET XPET FOAM SHEET ROUND DIE • Improved melt flow consistency • Improved IV consistency • Increased recycle content • Reduced rejects and scrap • Increased product strength • Improved low temperature performance • Increase final IV • Increased use of regrind • Impossible to start up without it • Faster product changeover • Easier to cut • Increased strength • Lighter weight • Good sealing ColorMatrix™ rePrize is a PET compatible formulated liquid dispersion, designed to increase the polymer chain length via reactive extrusion. This results in an increase in both the polymer intrinsic and melt viscosity. rePrize is suited to applications in: • PET monolayer sheet • PET multilayered sheet • PET foamed sheet rePrize can be used to optimise sheet manufacturing processes and product quality, whilst allowing for increased levels of recycle, contributing towards improved sustainability and reduced costs PRODUCT DESCRIPTION GLOBAL REGULATORY APPROVALS PRODUCT FDA EU GB MERCOSUR rePrize • • • • 1.844.4AVIENT www.avient.com Copyright © 2020, Avient Corporation.

BASE RESIN PPA PC PSU PES PPS CO- POLYMER ACETAL PEEK PA Barrel Temperatures* °F (°C) Rear Zone 550–580 (288–305) 520–560 (271–293) 600–640 (316–338) 630–660 (332–338) 550–580 (288–304) 350–370 (177–188) 660–700 (349–371) 440–490 (227–254) Center Zone 560–600 (293–316) 530–570 (277–299) 620–670 (327–354) 650–680 (343–360) 560–615 (293–324) 380–390 (193–200) 700–730 (371–388) 470–510 (243–266) Front Zone 580–620 (304–327) 550–580 (288–305) 630–680 (332–360) 670–730 (354–388) 590–630 (310–332) 390–430 (200–221) 720–750 (382–400) 490–540 (254–282) Nozzle 575–615 (302–324) 550–600 (288–316) 630–680 (332–360) 680–700 (360–371) 600–625 (316–330) 380–415 (193–213) 720–750 (382–400) 520–570 (271–300) Melt Temperature 575–615 (302–324) 560–600 (293–316) 625–675 (330–358) 650–710 (343–377) 600–625 (316–330) 370–410 (188–210) 670–740 (354–393) 520–570 (271–300) Mold Temperature 250–300 (121–150) 175–240 (80–116) 190–300 (88–150) 225–325 (107–164) 250–325 (121–164) 150–225 (66–107) 290–375 (143–190) 150–200 (66–93) Pack & Hold Pressure 50%–75% of Injection Pressure Injection Velocity in/s 1.0–3.0 Back Pressure psi 50 Screw Speed rpm 50–90 Drying Parameters °F (°C) 6 hrs @ 175 (80) 4 hrs @ 250 (121) 4 hrs @ 275 (135) 4 hrs @ 300 (150) 4 hrs @ 250 (121) 2 hrs @ 200 (93) 3 hrs @ 300 (150) 4 hrs @ 180 (82) Allowable Moisture % < 0.05 < 0.02 < 0.02 < 0.04 < 0.02 0.15–0.20 < 0.02 0.10–0.20 Cushion in 0.125–0.250 Screw Compression Ratio 2.5:1–3.5:1 2.0:1–2.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 Nozzle Type General General General General General General General Reverse Taper Clamp Pressure 5–6 Tons/in2 of projected area of cavities and runner system * Barrel temperatures should be elevated for compounds designed for electrical insulative properties. PROBLEM CAUSE SOLUTION Incomplete Fill Melt and/or mold temperature too cold Shot Size • Increase nozzle and barrel temperatures • Increase mold temperature • Increase injection speed • Increase pack and hold pressure • Increase nozzle tip diameter • Check thermocouples and heater bands • Enlarge or widen vents and increase number of vents • Check that vents are unplugged • Check that gates are unplugged • Enlarge gates and/or runners • Perform short shots to determine fill pattern and verify proper vent location • Increase wall thickness to move gas trap to parting line • Increase cushion Brittleness Melt temperature too low Degraded/Overheated material Gate location and/or size • Increase melt temperature • Increase injection speed • Measure melt temperature with pyrometer • Decrease melt temperature • Decrease back pressure • Use smaller barrel/excessive residence time • Relocate gate to nonstress area • Increase gate size to allow higher flow speed and lower molded-in stress Fibers on Surface (Splay) Melt temperature too low Insufficient packing • Increase melt temperature • Increase mold temperature • Increase injection speed • Increase pack and hold pressure, and time Sink Marks Part geometry too thick Melt temperature too hot Insufficient material volume • Reduce wall thickness • Reduce rib thickness • Decrease nozzle and barrel temperatures • Increase shot size • Increase injection rate • Increase packing pressure Flash Injection pressure too high Excess material volume Melt and/or mold temperature too hot • Decrease injection pressure • Increase clamp pressure • Decrease injection speed • Increase transfer position • Decrease pack pressure • Decrease shot size • Decrease injection speed • Decrease nozzle and barrel temperatures • Decrease mold temperature • Decrease screw speed TROUBLESHOOTING RECOMMENDATIONS PROBLEM CAUSE SOLUTION Excessive Shrink Too much orientation • Increase packing time and pressure • Increase hold pressure • Decrease melt temperature • Decrease mold temperature • Decrease injection speed • Decrease screw rpm • Increase venting • Increase cooling time Not Enough Shrink Too little orientation • Decrease packing pressure and time • Decrease hold pressure • Increase melt temperature • Increase mold temperature • Increase injection speed • Increase screw rpm • Decrease cooling time Burning Melt and/or mold temperature too hot Mold design Moisture • Decrease nozzle and barrel temperatures • Decrease mold temperature • Clean, widen and increase number of vents • Increase gate size or number of gates • Verify material is dried at proper conditions Nozzle Drool Nozzle temperature too hot • Decrease nozzle temperature • Decrease back pressure • Increase screw decompression • Verify material has been dried at proper conditions Weld Lines Melt front temperatures too low • Increase pack and hold pressure • Increase melt temperature • Increase vent width and locations • Increase injection speed • Decrease injection speed • Increase gate size • Perform short shots to determine fill pattern and verify proper vent location • Add vents and/or false ejector pin • Move gate location Warp Excessive orientation • Increase cooling time • Increase melt temperature • Decrease injection pressure and injection speed • Increase number of gates Sticking in Mold Cavities are overpacked Part is too hot • Decrease injection speed and pressure • Decrease pack and hold pressure • Decrease nozzle and barrel temperatures • Decrease mold temperature • Increase cooling time • Increase draft angle • Decrease nozzle and barrel temperatures • Decrease mold temperature TROUBLESHOOTING RECOMMENDATIONS Note: These are general processing conditions.

Base Resin PPA PC PSU PES PPS Co- polymer Acetal PEEK PA Barrel Temperatures* °F (°C) Rear Zone 550–580 (288–305) 550–590 (288–310) 600–640 (316–338) 630–660 (332–338) 550–580 (288–304) 350–370 (177–188) 660–700 (349–371) 440–490 (227–254) Center Zone 560–600 (293–316) 570–600 (300–316) 620–670 (327–354) 650–680 (343–360) 560–615 (293–324) 380–390 (193–200) 700–730 (371–388) 470–510 (243–266) Front Zone 580–620 (304–327) 580–630 (304–322) 630–680 (332–360) 670–730 (354–388) 590–630 (310–332) 390–430 (200–221) 720–750 (382–400) 490–540 (254–282) Nozzle 575–615 (302–324) 580–630 (304–322) 630–680 (332–360) 680–700 (360–371) 600–625 (316–330) 380–415 (193–213) 720–750 (382–400) 520–570 (271–300) Melt Temperature 575–615 (302–324) 580–625 (304–330) 625–675 (330–358) 650–710 (343–377) 600–625 (316–330) 370–410 (188–210) 670–740 (354–393) 520–570 (271–300) Mold Temperature 250–300 (121–150) 175–240 (80–116) 190–300 (88–150) 225–325 (107–164) 250–325 (121–164) 190–250 (88–121) 290–375 (143–190) 150–200 (66–93) Pack & Hold Pressure 50%–75% of Injection Pressure Injection Velocity in/s 1.0–3.0 Back Pressure psi 50 Screw Speed rpm 50–90 Drying Parameters °F (°C) 6 hrs @ 175 (80) 4 hrs @ 250 (121) 4 hrs @ 275 (135) 4 hrs @ 250 (121) 3 hrs @ 300 (150) 2 hrs @ 200 (93) 3 hrs @ 275 (135) 4 hrs @ 180 (82) Cushion in 0.125–0.250 Screw Compression Ratio 2.5:1–3.5:1 2.0:1–2.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 Nozzle Type General General General General General General General Reverse Taper Clamp Pressure 5–6 Tons/in2 of projected area of cavities and runner system * Barrel temperatures should be elevated for compounds designed for electrical insulative properties. PROBLEM CAUSE SOLUTION Excessive Shrink Too much orientation • Increase packing time and pressure • Increase hold pressure • Decrease melt temperature • Decrease mold temperature • Decrease injection speed • Decrease screw rpm • Increase venting • Increase cooling time Not Enough Shrink Too little orientation • Decrease packing pressure and time • Decrease hold pressure • Increase melt temperature • Increase mold temperature • Increase injection speed • Increase screw rpm • Decrease cooling time Burning Melt and/or mold temperature too hot Mold design Moisture • Decrease nozzle and barrel temperatures • Decrease mold temperature • Clean, widen and increase number of vents • Increase gate size or number of gates • Verify material is dried at proper conditions Nozzle Drool Nozzle temperature too hot • Decrease nozzle temperature • Decrease back pressure • Increase screw decompression • Verify material has been dried at proper conditions Weld Lines Melt front temperatures too low • Increase pack and hold pressure • Increase melt temperature • Increase vent width and locations • Increase injection speed • Decrease injection speed • Increase gate size • Perform short shots to determine fill pattern and verify proper vent location • Add vents and/or false ejector pin • Move gate location Warp Excessive orientation • Increase cooling time • Increase melt temperature • Decrease injection pressure and injection speed • Increase number of gates Sticking in Mold Cavities are overpacked Part is too hot • Decrease injection speed and pressure • Decrease pack and hold pressure • Decrease nozzle and barrel temperatures • Decrease mold temperature • Increase cooling time • Increase draft angle • Decrease nozzle and barrel temperatures • Decrease mold temperature TROUBLESHOOTING RECOMMENDATIONS PROBLEM CAUSE SOLUTION Incomplete Fill Melt and/or mold temperature too cold Shot Size • Increase nozzle and barrel temperatures • Increase mold temperature • Increase injection speed • Increase pack and hold pressure • Increase nozzle tip diameter • Check thermocouples and heater bands • Enlarge or widen vents and increase number of vents • Check that vents are unplugged • Check that gates are unplugged • Enlarge gates and/or runners • Perform short shots to determine fill pattern and verify proper vent location • Increase wall thickness to move gas trap to parting line • Increase cushion Brittleness Melt temperature too low Degraded/Overheated material Gate location and/or size • Increase melt temperature • Increase injection speed • Measure melt temperature with pyrometer • Decrease melt temperature • Decrease back pressure • Use smaller barrel/excessive residence time • Relocate gate to nonstress area • Increase gate size to allow higher flow speed and lower molded-in stress Fibers on Surface (Splay) Melt temperature too low Insufficient packing • Increase melt temperature • Increase mold temperature • Increase injection speed • Increase pack and hold pressure, and time Sink Marks Part geometry too thick Melt temperature too hot Insufficient material volume • Reduce wall thickness • Reduce rib thickness • Decrease nozzle and barrel temperatures • Increase shot size • Increase injection rate • Increase packing pressure Flash Injection pressure too high Excess material volume Melt and/or mold temperature too hot • Decrease injection pressure • Increase clamp pressure • Decrease injection speed • Increase transfer position • Decrease pack pressure • Decrease shot size • Decrease injection speed • Decrease nozzle and barrel temperatures • Decrease mold temperature • Decrease screw speed TROUBLESHOOTING RECOMMENDATIONS www.avient.com Copyright © 2020, Avient Corporation.

Clariant Masterbatch performance will be included in this year’s report. 2021 Sustainalytics ESG Risk Ranking Newsweek Most Responsible Companies 2016 2017 2018 2019 2020PF VOC Reduction Reduced Energy Use Bio-derived Content Eco-conscious Renewable Energy Applications Recyclability Reduced Material Requirements Lightweighting $275M $325M $355M $410M $560M 13 (1) Avient Sustainable Solutions definitions aligned with FTC 2012 Guide for the Use of Environmental Marketing Claims (“Green Guides”) (2) 2020 is Pro forma to include full year of the Clariant Masterbatch business (2) Revenue from Sustainable Solutions 2016 – 2020 SUSTAINABILITY FOR A BETTER TOMORROW 14 • Revenue from sustainable solutions expected to grow 11% in 2021 as our innovation efforts and collaboration with customers continues to accelerate • Relentless focus on delivering our 2030 sustainability targets to benefit the planet and people of the world while adding value to our customers, communities, associates and shareholders • Investments centered around innovation and global sustainability megatrends o Improving Recyclability – Technologies that allow for increased use of post-consumer recycled (PCR) material o Light-weighting – Composites and CAI applications to reduce weight and material requirements, which minimize energy and carbon emissions o Eco-Conscious – Health and human safety applications as well as Avient’s alternative materials to replace lead, PVC, halogens, BPA and other less eco-friendly options o Avient CycleWorks – New innovation center dedicated to advancing recycling and the circular economy through collaboration with customers and brand owners Enable 100% of products manufactured for packaging applications to be recyclable or reusable. Obtain 40% of electricity demand from renewable sources. 100% of technology platform projects will deliver sustainable solutions. 21 We are a specialty formulator that enables many of the world’s products through innovation and custom solutions.

Our purpose at Avient is to be an innovator of materials solutions that help our customers succeed, while enabling a sustainable world. Jellison Retired Vice President, Chief Financial Officer of Stryker Corporation (“Stryker”), one of the world’s leading medical technology (“Medtech”) companies. Former Directorships: • Univar Solutions Inc.