KEY CHARACTERISTICS • Manufactured at four ISO 13485 certified sites, providing global consistency and increased security of supply • Documented change control beyond CAS number, reducing risk of change • Non-phthalate and formulated without animal-derived substances • Color can be combined with additives to enhance performance and protection REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Device Master File • Food contact established with FDA/EU* NOMINAL OUTSIDE DIAMETER OF NEEDLE (MM) COLOR DESCRIPTION RAL PANTONE TRANSPARENT PRODUCT CODE OPAQUE PRODUCT CODE 0.4 Medium Grey 7035 423 C PP7M665125 PP7M665127 0.45 Brown 8017 7588 C PP8M665294 PP8M665296 0.5 Orange 2003 173 C PP2M665298 PP2M665300 0.55 Medium Purple 4005 7676 C PP4M665290 PP4M665292 0.6 Deep Blue 5010 288 C PP5M665894 PP5M665896 0.7 Black 9005 Black C PP9M664950 PP9M664952 0.8 Deep Green 6001 7483 C PP6M665687 PP6M665689 0.9 Yellow 1021 115 C PP1M665211 PP1M665213 1.1 Cream 1015 7401 C PP0M665290 PP0M665292 1.2 Pink 3015 502 C PE3M665725 PP3M665727 Healthcare use limitations apply—see below.

% Solids Color Index pH Typical Weight Lbs/Gal WHITE 10WDN03 Titanium Dioxide, Rutile 60 73 PW-6 9 16.7 YELLOW 12WDN01 Diarylide AAOT GS 35 43 PY-14 8.8 9.4 12WDN02 Diarylide HR RS 37 44 PY-83 8.8 9.6 12WDN03 Arylide GY RS 38 45 PY-74 8.8 9.2 81WDN01 Iron Oxide 55 63 PY-42 8.8 14.5 ORANGE 15WDN01 Pryazolone YS 40 45 PO-13 8.8 9.2 15WDN03 Dianisidine RS 35 37 PO-16 8.8 9.2 15WDN06 DNA Orange RS 31 43 PO-5 8.8 9.7 RED 22WDN01 Lithol Rubine BS 33 40 PR-57 8.8 9.8 21WDN01 Naphthol BS 35 43 N/A 8.8 9.5 25WDN01 Red 2B, Ca BS 34 41 PR-48:2 8.8 9.6 28WDN01 Red 2B, Ba YS 36 44 PR-48:1 8.8 9.5 82WDN02 Iron Oxide 57 66 PR-101 8.8 16 BLUE 40WDN01 Phthalocyanine RS 35 46 PB-15 8.8 9.7 40WDN03 Phthalocyanine GS 38 43 PB-15:3 8.8 9.8 GREEN WDN-27822 Phthalocyanine BS 42 53 PG-7 8.8 10.5 VIOLET/MAGENTA 24WDN02 Carbazole 35 48 PV-23 8.8 9.6 24WDN03 Quinacridone 31 39 PV-19 8.8 9.6 24WDN05 Quinacridone 30 41 PR-122 8.8 10 BLACK 90WDN01 Carbon Black 45 49 PB-7 8.8 9.3 WDN RS = Red Shade YS = Yellow Shade BS = Blue Shade GS = Green Shade HR = Heat-Resistant www.avient.com Copyright © 2020, Avient Corporation.

Solid Metal Various Shades Larger Flakes LASER MARK PATTERN on Metallic LASER MARKING GRANITE Specks GRANITE Fibers MARBLE TRANSLUCENT/ TINT/FLUORESCENT LIGHT DIFFUSION ONCOLOR™ REC POLYMER COLORANTS Color concentrate derived from recycled content such as end-of-life tires • Sustainable alternative to virgin carbon black • Retains performance characteristics of traditional carbon black • Available for multiple resins and custom solutions Visit us at avient.com

HDPE is not recommended for purging as it can cause delamination or lead to black specks. Sink Marks Melt too hot Insufficient material volume • Increase shot size • Increase packing pressure Part geometry too thick • Reduce wall thickness • Reduce rib thickness Flash Injection pressure too high • Decrease injection pressure • Increase clamp pressure • Increase transfer position Excess material volume • Decrease pack pressure • Decrease shot size Melt and/or mold temperature too hot Loose clamp • Reset mold height • Increase clamp tonnage Shrink Too much shrink • Increase cooling time Too little shrink • Decrease cooling time Burning • Reduce decompression • Clean, widen and increase number of vents • Increase gate size to reduce shear Wet material • Verify material is dried at proper condition Nozzle Drool Nozzle temperature too hot • Decrease nozzle temperature • Decrease back pressure • Increase screw decompression • Verify material has been dried at proper conditions Incorrect nozzle • Use reverse taper tip Weld Lines Melt front temperatures are too low • Increase pack and hold pressure • Increase gate size • Identify end of fill pattern and verify proper vent location • Add vents or increase vent width • Move gate location Warp • Reduce injection speed • Increase pack pressure • Increase pack time • Increase cool time Mold design • Non-uniform mold cooling Part design • Non-uniform wall thickness Thermolator incorrect temperature • Check settings • Inspect thermocouple Sticking in Mold Overfilled cavity • Decrease injection rate and pressure • Decrease hold pressure • Decrease cooling time Part too hot • Decrease barrel temperature • Increase cooling time • Increase draft angle • Polish cores in direction of ejection Black Specks Contamination • Purge machine Degradation • Reduce melt temperature • Reduce screw speed • Reduce back pressure Machine related • Check for wear on screw, barrel or check ring Delamination • Purge barrel to eliminate material contamination • Reduce sharp corners in material flow path • Increase venting Discoloration Oversheared material • Decrease melt temperature • Reduce residence time Mold design • Increase gate sizing Dry material • Check moisture of material to ensure it is within the recommended moisture percentage for molding 1.844.4AVIENT www.avient.com Copyright © 2021, Avient Corporation.

Black Sand French Gray Laguna Emerald Irish Mist Tahoe Mauve JadeMidnight Blue Caribbean Tropical Breeze For more inspiring color ideas, call Mesa customer service at 440.930.1760 mesaconstructioncolors.com Copyright © 2020, Avient Corporation.

Get Help Now +86-21-60284888

The company’s product engineers developed specifications that included thermal conductivity in plane from 4 to 21 W/m.K (in compliance with ASTM E1461); glow wire resistance of 850°C/0.8mm (IEC 606095-2-12); and enough dimensional stability to allow it to be overmolded directly on LED components.

Media contact Jennifer Huang  Senior Manager, Marketing Communications Asia  Avient Corporation   +86 21 60284888  jennifer.huang@avient.com

Jennifer Huang Senior Manager, Marketing Communications Asia Avient Corporation +86 21-6028-4888 jennifer.huang@avient.com

Media contact Jennifer Huang Senior Manager, Marketing Communications Asia Avient Corporation +86 21 60284888 jennifer.huang@avient.com