Examples of amorphous polymers are acrylonitrile butadiene styrene/acrylonitrile styrene acrylate (ABS/ASA), polycarbonate (PC), polymethyl methacrylate (PMMA), and copolyesters. This regional collaboration allows a local source to be identified to manufacture a similar compound with the same quality standards anywhere in the world.

However, it can react with other materials in the soil and water to form other compounds. Antimony trioxide that enters the soil will likely react with any iron, aluminum and manganese compounds that might be present in the soil to form other antimony compounds.

STARTUP & SHUTDOWN RECOMMENDATIONS Purge Compound HDPE or HIPS Recycling Recycling Stat-Tech up to 20% is permissible. Venting • Place vents at the end of fill and anywhere potential knit/weld lines will occur. • All vents need to be vented to atmosphere. • For circular parts, full perimeter venting is recommended. • Cut vent depths to: - PC Compounds: 0.001"–0.002" depth and 0.250" width - PC/PSU Compounds: 0.002"–0.003" depth and 0.250" width - PES Compounds: 0.003"–0.004" depth and 0.250" width - PEI Compounds: 0.001"–0.003" depth and 0.250" width - PP Compounds: 0.001"–0.002" depth and 0.250" width - ABS Compounds: 0.0015"–0.0025" depth and 0.250" width - PEEK Compounds: 0.002"–0.004" depth and 0.250" width - Nylon Compounds: 0.002" min. depth and 0.250" width • Increase vent depth to 0.040" (1.0mm) at 0.250" (4.0mm) away from the cavity and vent to atmosphere.

14H2348 FROSTED POLYCARBONATE

Available as Cesa™ Withstand™ SX Low Haze for clear polycarbonate and plexiglass applications using recyclate

LubriOne internally lubricated formulations made without PTFE were first introduced in 2023 and are available in a wide range of solutions with base resins from polyamide 6.6 (PA66) and polyoxymethylene (POM) to polycarbonate (PC) and polyphenylene ether (PPE).

Protection against the Elements   For speaker gaskets and seals, Versaflex™ CE (40 Shore A) replaces separate O-rings with an overmolded, internal part that firmly bonds to polycarbonate (PC), acrylonitrile-butadiene-styrene (ABS), copolyester, or PC/ABS without adhesives.

These solutions are made with bio-derived polymers, including polypropylene, polyethylene, polycarbonate, acrylonitrile butadiene styrene (ABS), and styrenics, with bio-derived content ranging from 70% to 100%.

Launched in 2021, Mevopur™ Healthcare Bio-based Polymer Solutions are color and additive concentrates and ready-to-use formulations manufactured with bio-based polypropylene, polyethylene, polycarbonate, acrylonitrile butadiene styrene, or styrenic polymers.  

Introduced in 2021, the Mevopur portfolio also includes custom color and additive concentrates and ready-to-use formulations made with bio-based polyolefins, polycarbonate, acrylonitrile butadiene styrene, or styrenic polymers.