If possible, profile the injection speed to fill the runner system rapidly and then slow down after the material starts flowing through the gate and into the cavity. If the machine is not capable of being controlled by fill speed, set the injection pressure high enough to fill the runner system and cavity in about 1 to 5 seconds. The optimum time to fill the runner system is approximately 0.5 - 1.5 seconds.

Pedal systems

understand component behavior within a broader automotive system  

Stan-Tone™ EPX Epoxy Dispersions are used in a variety of thermoset epoxy systems such as protective coatings, adhesives, epoxy flooring, electrical potting, laminates and decorative jewelry.

Pultrusion is the process of impregnating and curing fibers in a resin system to form a rigid rod.

The redesigned Syncure material enables cable manufacturers to use a single resin for both vertical and horizontal cable systems, eliminating the need for a second material and associated costs and assembly time.

IT Systems Use Policy

SiteCool™ Infrared Absorption Technologies for fluoropolymer roofing or wall systems reduce the transfer of heat into the interiors of architectural structures by absorbing solar infrared (IR) energy into the fluoropolymer sheet.

Liquid Metering System: ColorMatrix™ FlexOne™

Custom colors using vinyl-terminated, reactive silicone available for liquid injection molding systems