Total polymer solutions range from flame retardant, non-halogenated, low smoke polymers and lightweight foam to cross-linkable polyethylene and high-temperature materials. OnCap™ Nucleating Foaming Agent: Used with polyethylene compounds for manufacturing coaxial cables using a gas injection foaming process Syncure™ Cross-Linked Polyethylene Formulations: Two-step, silane-grafted, moisture cross-linkable polyethylene systems (XLPE) for improved heat, oil, creep and abrasion resistance

This family of polypropylene- and polyethylene- based products is an ideal performance driven alternative to highly engineered polymers across a variety of industries. PROPERTY CONDITION UNITS METHOD PRODUCT EXAMPLES 51.866.POLYONE www.polyone.com INJECTION MOLDING POLYPROPYLENE Product Code - - - PP5210 A111 PP5220F A1 PP5230F B1 PP5240 A111 Filler Percentage - % - 10 20 30 40 Tensile Strength Yield psi ASTM D638 4600 4300 3900 3500 MPa ISO 527 32 30 27 24 Tensile Elongation Yield % ASTM D638 7.0 6.0 5.5 5.0 ISO 527 Break % ASTM D638 125 115 100 70 ISO 527 Flexural Modulus 73°F (23°C) psi ASTM D790 250,000 285,000 310,000 340,000 MPa ISO 180 1600 1900 2100 2300 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 0.70 0.70 0.70 0.70 kJ/m2 ISO 180 3.85 3.85 3.85 3.85 Heat Deflection 66 psi °F ASTM D648 190 210 225 240 °C ISO 75 88 99 107 116 264 psi °F ASTM D648 120 125 130 133 °C ISO 75 49 52 54 56 Specific Gravity 73°F (23°C) - ASTM D792 0.96 1.04 1.15 1.25 Linear Shrinkage Range 1/8 in wall % - 1.3–1.7 1.1–1.5 0.9–1.3 0.7–1.1 3.2 mm wall % - 1.3–1.7 1.1–1.5 0.9–1.3 0.7–1.1 Product Code - - - PP6210 A11 PP7220 A614 PP6230F A1 PP6240 A44 Filler Percentage - % - 10 20 30 40 Tensile Strength Yield psi ASTM D638 3200 3400 2800 2550 MPa ISO 527 22 24 19 18 Tensile Elongation Yield % ASTM D638 14.0 10.0 8.0 7.0 ISO 527 Break % ASTM D638 >400 >400 >400 200 ISO 527 Flexural Modulus 73°F (23°C) psi ASTM D790 160,000 185,000 250,000 225,000 MPa ISO 178 1100 1300 1750 1550 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 >10.0 >10.0 8 8.0 kJ/m2 ISO 180 55.0 55.0 44.0 14.0 Heat Deflection 66 psi °F ASTM D648 160 170 198 200 °C ISO 75 71 77 92 93 264 psi °F ASTM D648 100 105 108 112 °C ISO 75 38 41 42 44 Specific Gravity 73°F (23°C) - ASTM D792 0.96 1.04 1.15 1.25 ISO 1183 Linear Shrinkage Range 1/8 in wall % - 1.2–1.6 1.0–1.4 0.8–1.2 0.6–1.0 3.2 mm wall % - 1.2–1.6 1.0–1.4 0.8–1.2 0.6–1.0 Maxxam™ Calcium Carbonate Filled Homopolymer Polypropylene Maxxam™ Calcium Carbonate Filled Copolymer Polypropylene Offers improved stiffness over unfilled materials as well as substantial improvement in drop weight impact and notched izod impact. Formulated for underhood automotive HVAC use to minimize unwanted odor while reducing VOC emissions. • Chemically coupled • Natural or black • High flow grades • Provides heat stabilization • Excellent balance of properties • Natural, black or custom colors Product Code - - - PX5430 B1 PX5435 B1 PX5440 B1 PX5450 B1 Reinforcement Type - - - Glass Glass Glass Glass Reinforcement % - % - 30 35 40 50 Specific Gravity 73°F (23°C) - ISO 1183 1.13 1.18 1.23 1.35 Tensile Strength Yield MPa ISO 527 102 105 113 130 Flexural Modulus 73°F (23°C) MPa ISO 178 6500 8000 9400 11,500 Notched Izod Impact 73°F (23°C) kJ/m2 ISO 180 9.4 9.3 11.0 12.0 Heat Deflection 264 psi °C ISO 75 152 152 153 154 Product Code - - - PP5120 B270-LO MFR g/10 min ISO 1133 12 Tensile Modulus MPa ISO 527 3320 Tensile Stress Yield MPa ISO 527 32 Tensile Elongation Yield % ISO 527 4.6 Tensile Elongation Break % ISO 527 17 Flexural Modulus MPa ISO 178 3000 Charpy Impact 73°F (23°C) kJ/m2 ISO 179/1eU 38 Heat Aging 150°C h VW 44045 700 hr VOC µg/g VDA 278 23.5 Fog µg/g VDA 278 30.5 Carbon Emissions µgC/g VDA 277 18 Odor Grade VDA 270 B3 3 • High flow grades • UV stabilized PROPERTY CONDITION UNITS METHOD PRODUCT EXAMPLES INJECTION MOLDING POLYPROPYLENE PROPERTY CONDITION UNITS METHOD PRODUCT EXAMPLES 10 Maxxam™ Filled & Reinforced Polypropylene A range of melt flows to process well in sheet extrusion, thermoforming, profile extrusion and blow molding operations. • FDA certifiable • Scratch & mar resistant • Impact modified • Natural, black or colors • UV stabilized • Chemically coupled EXTRUSION & BLOW MOLDING POLYPROPYLENE Product Code - - - EP6713 B1 EP6130 B10 EP6430 B1 EP5240 B145 EP7920 B1 Reinforcement Type - - - Talc Mineral Glass CaCO3 Glass/ Mineral Reinforcement % - % - 13 30 30 40 20 Specific Gravity 73°F (23°C) - ASTM D792 0.99 1.12 1.12 1.25 1.05 ISO 1183 Tensile Strength Yield psi ASTM D638 4800 4200 10,000 3600 6500 MPa ISO 527 31 29 69 35 45 Tensile Elongation Yield % ASTM D638 6 8 2 5 6 ISO 527 Break % ASTM D638 100 110 5 70 100 ISO 527 Flexural Modulus 73°F (23°C) psi ASTM D790 325,000 360,000 850,000 350,000 400,000 MPa ISO 178 2250 2400 5800 2400 2750 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 4.0 1.5 4.3 1.1 2.4 kJ/m2 ISO 180 20.0 8.0 24.0 6.0 13.0 Heat Deflection 66 psi °F ASTM D648 230 242 315 240 293 °C ISO 75 110 115 157 116 145 264 psi °F ASTM D648 130 158 270 140 212 °C ISO 75 54 68 132 60 100 PROPERTY CONDITION UNITS METHOD PRODUCT EXAMPLES 111.866.POLYONE www.polyone.com EXTRUSION & BLOW MOLDING POLYPROPYLENE Maxxam™ Filled & Reinforced High Density Polyethylene Specifically designed for blow molding and sheet extrusion/thermoforming of structural parts.

Joule additive is available as a 10% concentrated dispersion, made up solely of 10% active component with 90% PET grade mono ethylene glycol (MEG).

PRODUCT BULLETIN Stan-Tone™ Colorants Urethane Paste Colorants (PEP & ET) Stan-Tone™ PEP polyester urethane paste colorants are select organic and inorganic pigments dispersed in diethylene glycol adipate.

The page below summarizes the common overmolding situations for medical, universal, polypropylene, polyethylene, polystyrene, polycarbonate, acrylonitrile butadiene styrene, nylon and copolyester. Overmolding Low Density Polyethylene (LDPE) Dynalloy™ 8900 Series – Low density polyethylene (LDPE) overmolding

Avient introduces the Syncure™ XLPE 200 Series, cross-linkable polyethylene formulations with a DBDPE-free alternative to traditional flame-retardant materials for low voltage cable systems. CLEVELAND – October 11, 2023 – Today, Avient Corporation is expanding its Syncure™ XLPE Cross-linkable Polyethylene Formulations portfolio with the launch of new flame-retardant grades made without decabromodiphenyl ethane (DBDPE). Like other Syncure materials, the DBDPE-free formulations combine a polyethylene graft resin and flame-retardant catalyst to create a cross-linked solution for cable systems.

Common Types & Deniers T-29:Standard Modulus T-49:High Modulus AP:15% higher tenacity than T-29 KM2:Optimized ballistic resistance Deniers:200, 380, 400, 750, 800, 1000, 1420, 2160, 2250, 2840, 3000, 7100

Spiral flow test performed using 0.0625" x 0.375" channel at 400°F

With the support of the Sustainable Development Office of French Ministry of Interior (Mission Development Durable), more than 250 soft armor vests from the French Police and Gendarmerie Nationale containing Dyneema® ballistic material were taken from the field and tested on a pilot scale – successfully eliminating more than 400 kg of waste to reinstate Dyneema® back into the circular economy.  

These include semi crystalline and amorphous polymers such as polypropylene, high impact polystyrene (HIPS), polycarbonate (PC), polystyrene (PS), acrylonitrile-butadiene-styrene (ABS), polyethylene terephthalate (PET), polybutylene terephthalate (PBT), polymethyl methacrylate (PMMA), styrene acrylonitrile (SAN), polyphylene oxide (PPO), polyoxymethylene (POM) and polyamide (PA). Table 1: Novel Non-Drying Overmold TPE Shore A Hardness(10 second delay) 57 Specific Gravity(g/cm3) 1.05 Color Natural 300% Modulus(MPa) 2.87 Tensile Strength(MPa) 3.24 Elongation at Break (%) 400 90° Deg., Peel ASA (N/mm) 2.72 90° Deg., Peel SAN (N/mm) 2.72 90° Deg. Surface energy match of various thermoplastic elastomers with rigid thermoplastics Engineering Plastics Polyamide 6,6 ABS Polycarbonate Acrylic Polystyrene Polypropylene Polyethylene Elastomer s COPA TPU COPE S-TPE TPV mPE Surface Energy (mN/m) 46 43 40 37 34 31 28 Engineering Plastics Polyamide 6,6 ABS Polycarbonate Acrylic Polystyrene Polypropylene Polyethylene Elastomer s COPA TPU COPE S-TPE TPV mPE Surface Energy (mN/m) 46 43 40 37 34 31 28 Figure 2.