DOWNLOAD THIS CARD AND HOVER OVER THE INK SWATCH TO REVEAL PMS CODES. 80550 LEMON YELLOW 30400 DOLPHIN ORANGE 43000 NATIONAL RED 50400 RUSSELL PURPLE 80100 LIGHT GOLD 80108 YELLOW 30200 BRIGHT ORANGE 42270 DRAKE RED 45400 MAROON 80000 GOLD 42000 DALLAS SCARLET 47600 BRANDYWINE 40000 SCARLET 75300 AQUA 60650 CONTACT BLUE Wilflex™ inks by Avient. Values reported as “typical” or stated without a range do not state minimum or maximum properties; consult your sales representative for property ranges and min/max specifications. Processing conditions can cause material properties to shift from the values stated in the information.

lang=En&n=FD9B0E51-1 https://ec.ss.ec.gc.ca/auth/en/Services City * Orangeville Postal Code: ** L9W3K3 Physical Address Address Line 1 17 Tideman Drive City Orangeville Postal Code ** L9W3K3 Additional Information   Land Survey Description   National Topographical Description   Parent Companies Facility Validation The information in this section was copied from the Single Window Information Manager (SWIM) at the time the plan summary was created.  Facility Information Facility Name: * Orangeville Plasticizer NAICS Code: * 326198 NPRI Id: * 2277 ON Reg 127/01 Id   Facility Mailing Address Delivery Mode General Delivery PO Box   Rural Route Number   Address Line 1 15 ­ Tideman Drive City * Orangeville Postal Code: ** L9W3K3 Physical Address Address Line 1 15 Tideman Drive City Orangeville Postal Code ** L9W3K3 Additional Information   Land Survey Description   National Topographical Description   NPRI Facility Location Latitude (decimal degrees) * 43.91330 Longitude (decimal degrees) * ­80.11580 UTM Zone   UTM Easting   UTM Northing   Contact Validation The information in this section was copied from the Single Window Information Manager (SWIM) at the time the plan summary was created. 

Copolyester, Polyester & PC/Polyester Blends Copolyester Eastman Tritan™ (Copolyester) High chemical resistance to a wide variety of hospital disinfectants; excellent toughness and impact resistance after disinfection; retains color and gloss after sterilization and disinfection; does not contain BPA, BPS or halogens Polybutylene Terephthalate (PBT) DuPont™ Crastin® & Rynite® (FR-PBT) 30% glass reinforced; flame retardant; good mold flow and electrical properties; high strength, stiffness, dimensional stability and heat resistance Polyester (PC/PET) & Polybutylene Terephthalate (PC/PBT) Covestro Makroblend® (FR-PC/PET) & (FR-PC/PBT) Strength; toughness; chemical resistance; flame retardant Covestro Makroblend® (Non-FR PC/PBT) Strength; toughness; chemical resistance; limited biocompatibility Trinseo EMERGE™ (FR-PC/PET) Chemical resistance; ignition resistance; limited biocompatibility PA, PVC, PC & PMMA Polyamide (Nylon, PA) Avient Trilliant™ XR Radiation Shielding (PA) Radiation shielding; green alternative for lead replacement; enhanced design freedom vs. lead; available in hard and soft durometers Arkema Rilsan® MED (PA11) & Rilsamid® MED (PA12) Chemical resistance; transparent and opaque; easy processing; creep resistance; temperature resistance; BPA-free; sterilizable by gamma, EtO and steam Polyvinyl Chloride GEON Performance Solutions Resilience™ HC (PVC) Excellent chemical resistance; good strength and stiffness; very good surface quality; inherently flame resistant; available in all medical colors; excellent solvent bonding to PVC Polycarbonate (PC) Trinseo EMERGE™ (PC) Ignition resistant; transparent and opaque; glass-filled also available PolyMethyl Methacrylate (PMMA) Trinseo Plexiglas® Acrylics (PMMA) Clarity; easy processing; chemical resistance; BPA free; ideal for light piping and lenses Styrenics & FR-PC/ABS Blends Styrenics Trinseo MAGNUM™ (ABS) Opaque; custom colors; excellent impact and flow; low residuals; full biocompatibility INEOS Styrolution Terlux® HD (MABS) Good clarity; good heat and overall chemical resistance; good impact strength; good solvent bonding to PVC; outstanding surface quality INEOS Styrolution Lustran® & Novodur® HD (ABS) Opaque appearance; outstanding chemical resistance; high impact strength; excellent balance of properties; ease of processability; bondable FR- Polycarbonate/ ABS (FR-PC/ABS) Covestro Bayblend® (FR-PC/ABS) Flame retardant; good impact resistance; dimensional stability; toughness Trinseo EMERGE™ (FR-PC/ABS) Ignition resistant; limited biocompatibility; high flow; easy processing; glass-filled also available RIGID COMPONENTS: DIAGNOSTIC, IMAGING, LIFE SUPPORT, LABORATORY, Applications include: • Housings • Covers • Monitor bezels • Body panels • Handles • Access panels • Battery enclosures • Wands • Coils Rigid Component Solution Needs: • Materials compliant with ISO 10993 & USP Class VI, if required • UL approved resins to meet flammability requirements • Housings with toughness & good impact resistance • Enclosures & components that withstand repeated cleanings • High-flow materials for components with complex designs FLEXIBLE COMPONENTS: DIAGNOSTIC, IMAGING, LIFE SUPPORT, LABORATORY, Applications include: • O-rings • Gaskets • Wheels • Soft touch grips/handles • Keypads/displays • Diaphragms • Seals Flexible Component Solution Needs: • Comfortable handles & grips • Water-tight seals • Durable feet or casters • Durable keypads • Flow control TPE, TPC-ET, TPU, TPV & Flexible PVC Thermoplastic Avient Versaflex™ HC Overmolding Series Proven healthcare solutions with hardness ranges 42–65 Shore A; autoclave, radiation and EtO sterilizable; bondable to many substrates; customizable haptics Arkema Pebax® MED Sterilizable by gamma and EtO; low energy return; soft touch; chemical resistance; overmolding material Thermoplastic Polyester DuPont™ Hytrel® Wide range of flexibility, stiffness, and processing options; Shore D between 30-82; BPA-free; excellent flex fatigue and toughness; low temperature flexibility; good chemical resistance Thermoplastic Polyurethane Covestro Texin® Biocompatible; soft touch; sterilizable; good chemical resistance; overmold for grips and handles; excellent bonding to polar substrates like PC; 70A to 95A Thermoplastic Vulcanizate Avient Versalloy™ Proven healthcare solutions with hardness ranges 45–90 Shore A; autoclave, radiation and EtO sterilizable; natural and colorable; smooth texture; bonds to PP Exxon Mobil Santoprene™ Durable sealing performance; elastic recovery; excellent chemical resistance; compliance with medical standards Flexible Polyvinyl Chloride GEON Performance Solutions Geon™ Flexible PVC Engineered exclusively for the healthcare market; transparent and opaque colors; radiopaque grades available; durometer ranges from 55A to 40D; gamma and EtO sterilizable Thermoset Silicone Elastomers Thermoset Silicone Elastomers/ Liquid Silicone Rubber (LSR) DuPont™ Liveo™ Silicone Elastomers (LSR) Biocompatible; non-irritating and non-sensitization; sterilizable; made without plasticizers, phthalates or latex PVC Polyvinyl Chloride GEON Performance Solutions Geon™ Flexible PVC Inherent flame resistance; halogen-free; excellent chemical resistance; non-yellowing; proven safety record in wire and cable applications; high temperature grades available TPE, TPC-ET, TPU & POE Thermoplastic Polyester Arkema Pebax® Flexibility; chemical resistance; easy processing; abrasion resistance; low coefficient of friction Thermoplastic Polyester Elastomers (TPC-ET) DuPont™ Hytrel® REACH, RoHS and WEEE compliant; wide range of flexibility, stiffness, and processing options; 30D-82D; BPA-free; excellent flex fatigue and toughness; low temperature flexibility; good chemical resistance Thermoplastic Polyurethane Covestro Texin® RoHs, WEEE, and REACH compliant; excellent memory and recoil; abrasion resistance; Texin® Rx Series - medical grade Polyether TPU – 70A to 80D Polyolefin Elastomer (POE) Avient ECCOH™ Non-halogenated flame retardant; high flexibility; environmental stress cracking resistance (ESCR); good electrical properties PA Polyamide (Nylon, PA) Arkema Rilsan® (PA) Chemical resistance; easy processing; abrasion resistance; low coefficient of friction; dimensional stability WIRE & CABLE: DIAGNOSTIC, IMAGING, LIFE SUPPORT, LABORATORY, Applications include: • Plug molding • Flexible jacket • Heater cable insulation • Flexible cords • Coil cords & cable Wire & Cable Component Solution Needs: • Materials compliant with UL, RoHS, REACH & WEEE, if needed • Materials with good chemical, moisture & abrasion resistance • Low smoke & non-halogen materials CUSTOM AVIENT SOLUTIONS FOR MEDICAL EQUIPMENT Custom Solution Needs Avient™ Custom Solutions Specialized materials to meet unique application requirements Avient Trilliant™ Healthcare products are a line of customized solutions specific for regulated medical devices; color branding expertise FDA-registered pre-colored resins and masterbatch options; color coding for safety and brand recognition Avient collaborates with key material suppliers to provide FDA-approved pre-colored resins Avient OnColor™ HC Plus offers customizable color masterbatch solutions pre-certified for biocompatibility using ISO 10993 and USP Class VI test protocol Reduced growth of microbes Avient WithStand™ additive technologies inhibit growth of microbes that often cause odor, staining and loss of mechanical properties AVIENT DISTRIBUTION Healthcare Supplier Line Card You face a unique set of challenges when designing parts for the healthcare industry. Values reported as “typical” or stated without a range do not state minimum or maximum properties; consult your sales representative for property ranges and min/max specifications. Processing conditions can cause material properties to shift from the values stated in the information.

RIGID COMPONENTS: DIAGNOSTIC, IMAGING, LIFE SUPPORT, LABORATORY, & MONITORING EQUIPMENT (housings & covers, monitor bezels, body panels, handles, battery enclosures, access panels, wands, coils) Rigid Component Materials compliant with ISO 10993 & USP Class VI, if required UL approved resins to meet flammability requirements Housings with toughness & good impact resistance Enclosures & components that withstand repeated cleanings High-flow materials for components with complex designs Copolyester, Polyester & PC/Polyester Blends Copolyester Eastman Tritan™ (Copolyester) High chemical resistance to a wide variety of hospital disinfectants; excellent toughness and impact resistance after disinfection; retains color and gloss after sterilization and disinfection; does not contain BPA, BPS or halogens Polybutylene Terephthalate (PBT) DuPont™ Crastin® & Rynite® (FR- PBT) 30% glass reinforced; flame retardant; good mold flow and electrical properties; high strength, stiffness, dimensional stability and heat resistance Polyester (PC/PET) & Polybutylene Terephthalate (PC/PBT) Covestro Makroblend® (FR-PC/PET) & (FR-PC/PBT) Strength; toughness; chemical resistance; flame retardant Covestro Makroblend® (Non-FR PC/PBT) Strength; toughness; chemical resistance; limited biocompatibility Trinseo EMERGE™ (FR-PC/PET) Chemical resistance; ignition resistance; limited biocompatibility PA, PVC, PC & PMMA Polyamide (Nylon, PA) Avient Trilliant™ XR Radiation Shielding (PA) Radiation shielding; green alternative for lead replacement; enhanced design freedom vs. lead; available in hard and soft durometers Arkema Rilsan® MED (PA11) & Rilsamid® MED (PA12) Chemical resistance; transparent and opaque; easy processing; creep resistance; temperature resistance; BPA-free; sterilizable by gamma, EtO and steam Polyvinyl Chloride GEON Performance Solutions Resilience™ HC (PVC) Excellent chemical resistance; good strength and stiffness; very good surface quality; inherently flame resistant; available in all medical colors; excellent solvent bonding to PVC Polycarbonate (PC) Trinseo EMERGE™ (PC) Ignition resistant; transparent and opaque; glass-filled also available PolyMethyl Methacrylate (PMMA) Altuglas Plexiglas® Acrylics (PMMA) Clarity; easy processing; chemical resistance; BPA free; ideal for light piping and lenses Styrenics & FR-PC/ABS Blends Styrenics Trinseo MAGNUM™ (ABS) Opaque; custom colors; excellent impact and flow; low residuals; full biocompatibility INEOS Styrolution Terlux® HD (MABS) Good clarity; good heat and overall chemical resistance; good impact strength; good solvent bonding to PVC; outstanding surface quality INEOS Styrolution Lustran® & Novodur® HD (ABS) Opaque appearance; outstanding chemical resistance; high impact strength; excellent balance of properties; ease of processability; bondable FR- Polycarbonate/ ABS Covestro Bayblend® Flame retardant; good impact resistance; dimensional stability; toughness Trinseo EMERGE™ Ignition resistant; limited biocompatibility; high flow; easy processing; glass-filled also available Flexible Component Solution Needs: Comfortable handles & grips Water-tight seals Durable feet or casters Durable keypads Flow control TPE, TPC-ET, TPU, TPV & Flexible PVC Thermoplastic Avient Versaflex™ HC Overmolding Series Proven healthcare solutions with hardness ranges 42–65 Shore A; autoclave, radiation and EtO sterilizable; bondable to many substrates; customizable haptics Arkema Pebax® MED Sterilizable by gamma and EtO; low energy return; soft touch; chemical resistance; overmolding material Thermoplastic Polyester DuPont™ Hytrel® Wide range of flexibility, stiffness, and processing options; Shore D between 30-82; BPA-free; excellent flex fatigue and toughness; low temperature flexibility; good chemical resistance Thermoplastic Polyurethane Covestro Texin® Biocompatible; soft touch; sterilizable; good chemical resistance; overmold for grips and handles; excellent bonding to polar substrates like PC; 70A to 95A Thermoplastic Vulcanizate (TPV) Avient Versalloy™ (TPV) Proven healthcare solutions with hardness ranges 45–90 Shore A; autoclave, radiation and EtO sterilizable; natural and colorable; smooth texture; bonds to PP Exxon Mobil Santoprene™ (TPV) Durable sealing performance; elastic recovery; excellent chemical resistance; compliance with medical standards Flexible Polyvinyl Chloride GEON Performance Solutions Geon™ Flexible PVC Engineered exclusively for the healthcare market; transparent and opaque colors; radiopaque grades available; durometer ranges from 55A to 40D; gamma and EtO sterilizable Thermoset Silicone Elastomers Thermoset Silicone Elastomers/ Liquid Silicone Rubber DuPont™ Liveo™ Silicone Elastomers (LSR) Biocompatible; non-irritating and non-sensitization; sterilizable; made without plasticizers, phthalates or latex FLEXIBLE COMPONENTS: DIAGNOSTIC, IMAGING, LIFE SUPPORT, LABORATORY, MONITORING EQUIPMENT (o-rings, gaskets, wheels, soft touch grips/handles, keypads/displays, diaphragms, seals) WIRE & CABLE: DIAGNOSTIC, IMAGING, LIFE SUPPORT, LABORATORY, & MONITORING EQUIPMENT (plug molding, heater cable insulation, flexible jacket, flexible cords, coil cords & cable) Wire and Cable Component Solution Needs: Materials compliant with UL, RoHS, REACH & WEEE, if needed Materials with good chemical, moisture & abrasion resistance Low smoke & non- halogen materials PVC Polyvinyl Chloride GEON Performance Solutions Geon™ Flexible PVC Inherent flame resistance; halogen-free; excellent chemical resistance; non-yellowing; proven safety record in wire and cable applications; high temperature grades available TPE, TPC-ET, TPU & POE Thermoplastic Polyester Arkema Pebax® Flexibility; chemical resistance; easy processing; abrasion resistance; low coefficient of friction Thermoplastic Polyester Elastomers (TPC-ET) DuPont™ Hytrel® REACH, RoHS and WEEE compliant; wide range of flexibility, stiffness, and processing options; 30D-82D; BPA-free; excellent flex fatigue and toughness; low temperature flexibility; good chemical resistance Thermoplastic Polyurethane Covestro Texin® RoHs, WEEE, and REACH compliant; excellent memory and recoil; abrasion resistance; Texin® Rx Series - medical grade Polyether TPU – 70A to 80D Polyolefin Elastomer (POE) Avient ECCOH™ Non-halogenated flame retardant; high flexibility; environmental stress cracking resistance (ESCR); good electrical properties PA Polyamide (Nylon, PA) Arkema Rilsan® (PA) Chemical resistance; easy processing; abrasion resistance; low coefficient of friction; dimensional stability CUSTOM AVIENT SOLUTIONS FOR MEDICAL EQUIPMENT Custom Solution Needs Avient™ Custom Solutions Specialized materials to meet unique application requirements Avient Trilliant™ Healthcare products are a line of customized solutions specific for regulated medical devices; color branding expertise FDA-registered pre-colored resins and masterbatch options; color coding for safety and brand recognition Avient collaborates with key material suppliers to provide FDA-approved pre-colored resins Avient OnColor™ HC Plus offers customizable color masterbatch solutions pre-certified for biocompatibility using ISO 10993 and USP Class VI test protocol Reduced growth of microbes Avient WithStand™ additive technologies inhibit growth of microbes that often cause odor, staining and loss of mechanical properties AVIENT DISTRIBUTION Healthcare Supplier Line Card You face a unique set of challenges when designing parts for the healthcare industry. Values reported as “typical” or stated without a range do not state minimum or maximum properties; consult your sales representative for property ranges and min/max specifications. Processing conditions can cause material properties to shift from the values stated in the information.

With the assistance of management and any outside advisers the Committee deems appropriate (a) review and discuss with management the Company’s disclosures in the CD&A, and, based on this review, make a recommendation as to whether to include it in the Company’s annual report on Form 10-K and proxy statement relating to the Company’s annual meeting of shareholders, and (b) prepare a Compensation Committee Report for inclusion in the Company’s proxy statement or other applicable SEC filings. 4 Board Reports and Annual Evaluation

Le Comité de liquidation dispose, à cette fin, des pouvoirs les plus étendus conférés par les articles 2:87 et suivants du Code des sociétés et des associations, sans devoir recourir à l'autorisation de l'assemblée générale prévue par les articles 2:88 et 2:97, paragraphe 3, alinéa 2, du Code des Article 28. Chaque année, le Comité de Liquidation se conformera au prescrit de l'article 2:99 du Code des L'assemblée se réunit conformément aux dispositions des présents statuts. Cet extrait est délivré avant enregistrement conformément à l'article 173, 1° bis du Code des Droits d'Enregistrement.  

VERIFICATION OPINION DECLARATION GREENHOUSE GAS EMISSIONS To: The Stakeholders of Avient Corporation Apex Companies, LLC (Apex) was engaged to conduct an independent verification of the greenhouse gas (GHG) emissions reported by Avient Corporation (Avient) for the period stated below. It is our opinion that Avient has established appropriate systems for the collection, aggregation and analysis of quantitative data for determination of these GHG emissions for the stated period and boundaries. Apex has implemented a Code of Ethics across the business to maintain high ethical standards among staff in their day-to-day business activities.

Ethics - Code of Conduct Avient has its own ethics policy – The Avient Code of Conduct which establishes a clear set of ethical and behavioral standards for business conduct by all Avient associates. The Avient code of conduct is available here. Information that Avient considers as confidential and will not communicate through questionnaires:  Building and facilities figures  Workforce effective  Organization charts  Shift organization  Unions affiliations  Customers  Suppliers  Procedures  Work instructions  Quality Manuals  FMEA/CCP  Control plans https://www.avient.com/company/policies-and-governance-0/code-conduct https://www.avient.com/company/sustainability/sustainability-report/people/human-rights https://www.avient.com/company/policies-and-governance-0/code-conduct https://www.avient.com/company/policies-and-governance-0/global-iso-certificate-library https://www.avient.com/resources/safety-data-sheets https://www.avient.com/resources/technical-data-sheets https://www.avient.com/company/sustainability/people/safety https://www.avient.com/company/sustainability/sustainability-report/planet/energy-ghg-emissions https://www.avient.com/investors/investor-news?

Est-il cohérent avec le Code et les valeurs d’Avient ? Aidez vos collaborateurs à respecter les exigences du Code, en fournissant une orientation sur le Code et les valeurs d’Avient Violations du code Nous prenons très au sérieux les violations de notre Code.

Est-il conforme au Code et aux valeurs d’Avient? Aider ses associés à se conformer aux exigences du Code en leur fournissant des conseils sur le Code et les valeurs d’Avient Violations du code Nous prenons très au sérieux les violations de notre Code.