We have a wealth of experience in metal replacement projects, and Sylumis tapped into this knowledge to make its Orion LED lamp project a great success,” said Holger Kronimus, VP Europe and general manager, Specialty Engineered Materials, Europe for PolyOne. The specialty polymer solution from PolyOne meets relevant safety standards, including a UL94-V0 flame class rating at 3mm thickness, and offers Sylumis significant production efficiencies via injection molding in place of metal forming.

Fast cycle times are achieved with this process, and the process can be automated. Vacuum bagging enables fast cycle times, with simpler equipment requirements compared to other methods.  CFRTP can also be molded on or into thermoplastic structures via hybrid compression and injection overmolding to create locally reinforced, molded components in a one-step process.

Fast cycle times are achieved with this process, and the process can be automated. Vacuum bagging enables fast cycle times, with simpler equipment requirements compared to other methods.  CFRTP can also be molded on or into thermoplastic structures via hybrid compression and injection overmolding to create locally reinforced, molded components in a one-step process.

Fast cycle times are achieved with this process, and the process can be automated. Vacuum bagging enables fast cycle times, with simpler equipment requirements compared to other methods.  CFRTP can also be molded on or into thermoplastic structures via hybrid compression and injection overmolding to create locally reinforced, molded components in a one-step process.

Runners • Full-round runners or a modified trapezoid runner are the best designs. Half-round runners are not recommended. • Only naturally balanced runner systems (“H” pattern) are recommended. • Runner diameters larger than 0.150" (3.8mm) and not exceeding 0.375" (9.5mm) are recommended. • Step each 90° bend in the system down in size (from sprue to gate) approximately 1/16" (1.5mm) to reduce pressure drop. • Place vents at each 90° intersection and vent to atmosphere. • Hot runner molds are acceptable and should be sized by the manufacturer. You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.

Enlarge gates and/or runners 5. Check settings 2. Check for wear on screw, barrel or check ring Delamination Process related 1.

ColorMatrix Joule™ RHB Fast Reheat Dispersions Best practices for handling and using ColorMatrix™ Joule™ RHB Fast Reheat Dispersions Enhancing the Recyclability of PET via Performance Additives

And combined efforts to execute our strategy have worked.  2018 marked the ninth consecutive year of adjusted EPS expansion at Avient, as we delivered $2.43 per share.  Over this period, we have significantly increased our operating margins in each of our businesses, as well as our Return on Invested Capital, and we have raised our dividend for seven years in a row.   And we did so while also yielding sustainable benefits in each of the eight key areas where our material science can have the most impact.

Fast cycle times are achieved with this process, and the process can be automated. Vacuum bagging enables fast cycle times, with simpler equipment requirements compared to other methods.  CFRTP can also be molded on or into thermoplastic structures via hybrid compression and injection overmolding to create locally reinforced, molded components in a one-step process.

Fast cycle times are achieved with this process, and the process can be automated. Vacuum bagging enables fast cycle times, with simpler equipment requirements compared to other methods.  CFRTP can also be molded on or into thermoplastic structures via hybrid compression and injection overmolding to create locally reinforced, molded components in a one-step process.