This information is as of March 1, 2023. Nicolas (1) 111,000 140,027 251,027 K.J. Name Number of Deferred Shares(1) R.E.

GUIDELINES FOR USING CESA CLEAN ADDITIVES • Cesa Clean works best when molded maintaining normal (injection) pressure/shear • For best results, Avient recommends a “Running Color Change” which eliminates breaks in the molding cycle • Since the Cesa Clean concentrate will expand, it is recommended to reduce the shot size by 20% • It is designed for use at a let-down ratio (LDR) of 3.0% or (33:1); however, use rate can vary depending on the severity of the contamination but typically is 2.0–4.0% (a use rate higher than 6.0% may not have any positive affect on the cleaning performance) • Using Cesa Clean as a routine part of your color change rotation will allow faster changes and consume a minimal amount of raw material - Note: If the manifold is not cleaned routinely, this process may be more time consuming and additional material will be required • It is best to process at your normal polymer processing temperatures - For best performance, stock temperature should be at least 400°F - If 400°F is achieved during the purging process, no additional activation will occur during the reprocessing of regrind - All parts produced during the “Running Purge Cycle” should be captured as regrind, resulting in a scrap-free color change - If using sequential gates, open and close all gates at the same time while purging the tool - If contamination appears to be coming from one gate, open and close first, and for an extended period of time, to force more material through this location - When cleaning in this manner, pay close attention to shot size - Parts containing the previous or new color plus any Cesa Clean can be used as regrind INTRODUCING CESA CLEAN TO YOUR PROCESS Hand Blend • Hand weigh enough of the Cesa Clean and natural resin mix to equate to 3–5 times the barrel capacity • Use rate should be 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • Note: Do not attempt to vacuum load more than 15 feet from source as stratification/separation may occur Volumetric Feeder • Calibrate feeder to dispense 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • This style of feeder is highly recommended for at-the-throat metering of Cesa Clean Blending Units Most blenders have an extra bin for an additive • Fill the additive bin with Cesa Clean • Set blender to introduce the Cesa Clean at 2.0 to 4.0% • Note: Do not air convey any further than 15 feet as Cesa Clean has a high density and may separate from the mix.

Boundaries of the reporting company GHG emissions covered by the verification:  Operational Control  Global Exclusions:  Fugitive refrigerants  Mobile Combustion Types of GHGs: CO2, N2O, CH4 GHG Emissions Statement:  Scope 1: 34,627 metric tons of CO2 equivalent  Scope 2 (Location-Based): 167,333 metric tons of CO2 equivalent  Scope 2 (Market-Based): 99,465 metric tons of CO2 equivalent  Scope 3: o Category 3 – Fuel and energy-related activities: 62,049 metric tons of CO2 equivalent Data and information supporting the Scope 1 and Scope 2 GHG emissions assertion were in most cases historical in nature and in some cases were estimated. Energy: o Diesel Fuel Consumption: 4,754,671 kWh o Natural Gas Fuel Consumption: 184,415,668 kWh o Renewable Energy Consumed - Self Generated (solar): 260,378 kWh o Renewable Energy Consumed - Self Generated (Wind): 2,554,186 kWh o Grid Electricity Consumed: 436,400,546 kWh Page 2 WATER RESOURCES • ENVIRONMENTAL SERVICES • INDUSTRIAL HYGIENE  •  SAFETY  •  SUSTAINABILITY  Apex Companies, LLC • (800) 733‐2739 • www.apexcos.com  o Renewable Energy Credits (REC) Purchased: 100,691,000 kWh o Renewable Electricity Consumed – Offsite: 128,982,866 kWh Period covered by GHG emissions verification:  January 1, 2022 to December 31, 2022 GHG Reporting Protocols against which verification was conducted:  World Resources Institute (WRI)/World Business Council for Sustainable Development (WBCSD) Greenhouse Gas Protocol, Corporate Accounting and Reporting Standard, Revised Edition (Scope 1 and 2) and the GHG Protocol Scope 2 Guidance, an amendment to the GHG Protocol Corporate Standard  WRI/WBCSD Corporate Value Chain (Scope 3) Accounting and Reporting Standard Verification Protocols used to conduct the verification:  ISO 14064-3 Second Edition 2019-04: Greenhouse gases - Part 3: Specification with guidance for the verification and validation of greenhouse gas statements  Apex’s standard procedures and guidelines for external Assurance of Sustainability Reports and International Standard on Assurance Engagements (ISAE) 3000 Revised, Assurance Engagements Other than Audits or Reviews of Historical Financial Information (effective for assurance reports dated on or after Dec. 15, 2015), issued by the International Auditing and Assurance Standards Board. Verification Opinion: Based on the verification process and procedures conducted to a limited assurance level of the GHG emissions statement shown above, Apex found no evidence that the GHG emissions statement:  is not materially correct and is not a fair representation of the GHG emissions data and information; and  has not been prepared in accordance with the WRI/WBCSD GHG Protocol Corporate Accounting and Reporting Standard (Scope 1 and 2), and WRI/WBCSD Greenhouse Gas Protocol Corporate Value Chain Accounting and Reporting Standard (Scope 3).

Boundaries of the reporting company GHG emissions covered by the verification:  Operational Control  Global Exclusions:  Fugitive refrigerants Types of GHGs: CO2, N2O, CH4 GHG Emissions Statement:  Scope 1: 18,242 metric tons of CO2 equivalent  Scope 2 (Location-Based): 134,244 metric tons of CO2 equivalent  Scope 2 (Market-Based): 85,892 metric tons of CO2 equivalent  Scope 3: o Category 3 – Fuel and energy-related activities (electricity transportation and distribution losses only): 8,777 metric tons of CO2 equivalent Data and information supporting the Scope 1 and Scope 2 GHG emissions assertion were in most cases historical in nature and in some cases were estimated. Energy: o Diesel Fuel Consumption: 7,268,012 kWh o Natural Gas Fuel Consumption: 90,498,342 kWh o Renewable Energy - Self Generated (solar): 252,779 kWh o Renewable Energy - Self Generated (Wind): 2,399,531 kWh o Electric Power: 339,815,274 kWh Page 2 WATER RESOURCES • ENVIRONMENTAL SERVICES • HEALTH & SAFETY • CLIMATE CHANGE Apex Companies, LLC • (800) 733-2739 • www.apexcos.com o Renewable Energy Credit (REC): 121,411,062 kWh o Renewable Power – Offsite: 27,119,749 kWh Period covered by GHG emissions verification:  January 1, 2021 to December 31, 2021 GHG Reporting Protocols against which verification was conducted:  World Resources Institute (WRI)/World Business Council for Sustainable Development (WBCSD) Greenhouse Gas Protocol, Corporate Accounting and Reporting Standard, Revised Edition (Scope 1 and 2) and the GHG Protocol Scope 2 Guidance, an amendment to the GHG Protocol Corporate Standard  WRI/WBCSD Corporate Value Chain (Scope 3) Accounting and Reporting Standard Verification Protocols used to conduct the verification:  ISO 14064-3 Second Edition 2019-04: Greenhouse gases - Part 3: Specification with guidance for the verification and validation of greenhouse gas statements  Apex’s standard procedures and guidelines for external Assurance of Sustainability Reports and International Standard on Assurance Engagements (ISAE) 3000 Revised, Assurance Engagements Other than Audits or Reviews of Historical Financial Information (effective for assurance reports dated on or after Dec. 15, 2015), issued by the International Auditing and Assurance Standards Board. Verification Opinion: Based on the verification process and procedures conducted to a limited assurance level of the GHG emissions statement shown above, Apex found no evidence that the GHG emissions statement:  is not materially correct and is not a fair representation of the GHG emissions data and information; and  has not been prepared in accordance with the WRI/WBCSD GHG Protocol Corporate Accounting and Reporting Standard (Scope 1 and 2), and WRI/WBCSD Greenhouse Gas Protocol Corporate Value Chain Accounting and Reporting Standard (Scope 3).

D_21_851633 Page 1 / 5 EXTRAIT Avient S.à r.l. Société à responsabilité limitée Route de Bastogne Parts détenues Nombre 131 000 Administrateur(s) / Gérant(s) Régime de signature statutaire Sous réserve de la Loi Luxembourgeoise et des présents Statuts, la Société est valablement engagée ou représentée à l'égard des tiers par : 10.1 si la Société a un Gérant Unique, la seule signature du Gérant Unique; 10.2 si la Société a plus d'un (1) Gérant, la signature unique de tout Gérant, à condition cependant que si des catégories différentes de Gérants (à savoir Gérant de catégorie A et Gérant de catégorie B) sont nommés, également la signature unique de tout Gérant (y compris par le biais de la représentation); 10.3 la signature unique de toute personne à qui un tel pouvoir aura été délégué conformément à l'Article 11. Kennedy 1855 Réviseur d'entreprises agréé 01/07/2021 Déterminée Date d'expiration du mandat 01/07/2024 Page 5 / 5 Pour extrait conforme [3] Luxembourg, le 16/11/2021 Pour le gestionnaire du registre de commerce et des sociétés [4] [1] Information mise à jour mensuellement sur base de l'article 12§3 de la loi modifiée du 19 décembre 2002 concernant le registre de commerce et des sociétés ainsi que la comptabilité et les comptes annuels des entreprises

Pro Forma Financial Information The Company acquired Avient Protective Materials (“Dyneema”) on September 1, 2022 (the “Acquisition Date”) and sold the Distribution segment on November 1, 2022. To provide comparable results, the company references “pro forma” financial metrics, which include the business results of Avient Protective Materials for periods prior to the Acquisition Date, as if the transaction occurred on January 1, 2021 and reflect Distribution as a discontinued operation. GUIDANCE 11 14.8% 15.8% Adjusted EBITDA Margin % Better-than-expected margins driven by: • Resilient demand for composites and sustainable solutions which improved mix of higher margin applications • Deceleration of raw material inflation • Cost reduction activities Q1 EBITDA BRIDGE 12 $ millions CAI: Price / Mix 19) Inflation (4) SEM: Price / Mix 6) Inflation (4) Net Price Benefit 17) Wage and Energy Inflation (13) Cost Reductions 8) FX (6) Q1 2023 Actual $134) Adjusted EBITDA Q1 2022 Pro Forma $ 176) Demand (48) • Weak demand conditions in-line with previous expectations • Pricing continues to cover inflation of raw materials, wages and energy U.S. & Canada 40% 38% 17% Q1 2023 SEGMENT, END MARKET AND GEOGRAPHY GEOGRAPHY REVENUESEGMENT FINANCIALS 18% 23% Building and 6%Telecommunications END MARKET REVENUE (1) Total company sales and adjusted EBITDA of $846M and $134M, respectively, include intercompany sales eliminations and corporate costs $537M $91M $310M $64M Sales EBITDA Specialty Engineered Materials Color Additives and Inks $134M$846M (1) 13 Q1 2023 SALES BY REGION Yo Y C H A N G E ( E X C L .

Pro Forma Financial Information The Company acquired Avient Protective Materials (“Dyneema”) on September 1, 2022 (the “Acquisition Date”) and sold the Distribution segment on November 1, 2022. To provide comparable results, the company references “pro forma” financial metrics, which include the business results of Avient Protective Materials for periods prior to the Acquisition Date, as if the transaction occurred on January 1, 2021 and reflect Distribution as a discontinued operation. Avient 2011, 2018 and 2021 multiples reflect trailing 12 months EBITDA at December 31. 28 EV / 2023E EBITDA 6.5 8.5 11.0 10.8 16.1 15.5 14.1 14.0 10.3 21.0 19.0 14.3 12.1 11.8 11.7 11.5 9.7 11 21 23 PM AV FM Avient Historic Multiple Avient Specialty Other Specialty / AP P E N DI X 30 Performance Additives 16% Pigments 12% TiO2 Dyestuffs 2% Polyethylene Nylon Polypropylene Styrenic Block Copolymer Other Raw Materials 33% ~40% hydrocarbon based (Grey shaded materials are hydrocarbon based, includes portion of “Other Raw Materials”) Non-hydrocarbon based materials 2022 pro forma results for the acquisition of Avient Protective Materials RAW MATERIAL BASKET SEGMENT DATA U.S. & Canada 40% 37% 18% 2022 PRO FORMA SEGMENT, END MARKET AND GEOGRAPHY GEOGRAPHY REVENUESEGMENT FINANCIALS Building and END MARKET REVENUE $2,355M $402M $1,300M $272M Sales EBITDA Specialty Engineered Materials Color Additives and Inks $592M$3,653M (1) 9% 32 (1) Total company sales and adjusted EBITDA of $3,653M and $592M, respectively, include intercompany sales eliminations and corporate costs 2022 REVENUE | $2 .4 BILLION US & Canada 34% 38% END MARKET REGION 33 34% 21% Building & 1% Energy 2% COLOR, ADDITIVES & INKS 2022 PRO FORMA REVENUE | $1 .3 BILLION US & Canada 52% 35% 34 19% 8%Industrial 16% 9% Defense Building & END MARKET REGION SPECIALTY ENGINEERED MATERIALS 32% 27% 14% Building & 3% 1% Defense 1% (18% of sales) 9% 2022 PROFORMA AVIENT REGIONAL SALES 27% 14% 17% Building & (37% of sales)Transportation 12% Building & US & Canada (40% of sales) 7% 56% 23% 7% Building & 1% LATAM (5% of sales) 3% 35 BY END MARKET Reconciliation of Non-GAAP Financial Measures (Unaudited) (Dollars in millions, except for per share data) Senior management uses comparisons of adjusted net income from continuing operations attributable to Avient shareholders and diluted adjusted earnings per share (EPS) from continuing operations attributable to Avient shareholders, excluding special items, to assess performance and facilitate comparability of results.

Data not dependent on company form 1. Tax number of the company 21/1. Company numbers 49/1.

Avient acquired the Clariant Masterbatch business (CMB) on July 1, 2020 (the “Acquisition Date”). Operating Income $3,783 $4,100 (1) Financial information is pro forma to include a full year of Clariant Masterbatch business acquisition Previous Guidance Current Guidance $3,783 $4,300 $308 $360 $308 $410 $1.93 $2.40 $1.93 $2.80 (1) (1)(1) (1)(1) (1) 12 BALANCE SHEET • Deleveraging to 1.9x net debt to adjusted EBITDA by the end of 2021 • Driven by record adjusted EBITDA performance and strong free cash flow generation from asset light business • Future cash deployment: M&A, opportunistic share repurchases and balance sheet / continued leverage reduction 3.5x 2.7x 1.9x Net Debt / Adjusted EBITDA ($ in millions) 2021E Adjusted EBITDA 560$ Free Cash Flow 275$ Total Debt 1,860 Less: Cash (800) Net Debt 1,060$ 2021E Net Debt / Adjusted EBITDA 1.9x (1) Financial information is pro forma to include a full year of Clariant Masterbatch business acquisition SUSTAINABILITY • Most recent Sustainability report substantially expanded disclosure on key environmental and social topics Reduce Scope 1 & 2 greenhouse gas emissions by 35%.

Martorell no.124 08740 Sant Andreu de la Barca Spain Scope Category I Production of customer specific Masterbatches for Food packaging materials on the dedicated extrusion lines Normative base ISO 22000:2018 Food Safety Management Systems - Requirements for any organization in the food chain Reg. no. 46388 Page 1 of 1 Validity 25. 02. 2024  – 24. 02. 2027 Issue 25. 02. 2024  A.Grisard, President SQS F.