Rapid Color Prototyping Technology OnColor™ HC Colorants used to streamline color development and production of dental floss containers

Sustainable infrastructure solutions that increase energy efficiency, renewable energy, natural resource conservation and fiber optic / 5G network accessibility

These nylon formulations contain 100 percent PCR resin, and are available in both PA6 and PA66 grades with various levels of glass fiber and mineral reinforcements.

PA-6 resin with 30 percent glass fiber reinforcement.

Color, Additives and Inks Color, Additives and Inks Color, Additives and Inks

In December, we acquired Magenta Master Fibers from BASF, which expanded our specialty colorant business for fiber applications, as well as grew our resources and presence in Europe and Asia. On December 9, 2015, the Company completed the acquisition of specialty color concentrates of Magenta Master Fibers (Magenta) for $18.3 million, net of cash acquired. Note 2 — BUSINESS COMBINATIONS Magenta Master Fibers On December 9, 2015, the Company completed the acquisition of Magenta Master Fibers (Magenta), a leading innovative developer of specialty color concentrates for the global fiber industry, for approximately $18.3 million, net of cash acquired.

NYMAX™ POLYMER FORMULATIONS PRIME & RECYCLED NYLON THERMOPLASTICS PROCESSING GUIDE 2 Nymax Polymer Formulations Nymax™ and Nymax™ REC Formulations Nymax™ thermoplastics include prime and recycled nylon formulations in both unfilled grades and with various levels of glass fiber and mineral reinforcements. Degraded/ overheated material • Decrease melt temperature • Decrease back pressure • Use smaller barrel • Decrease injection speed Gate location and/or size • Relocate gate to nonstress area • Increase gate size to allow higher flow rate and lower molded in stress Fibers/Minerals on Surface or Uneven Surface Appearance Melt temperature too low • Increase melt temperature • Increase mold temperature • Increase injection speed Insufficient packing • Increase hold pressure and time • Increase shot size Processing Guide 5 Problem Cause Solution Sink Marks Part geometry too thick • Reduce wall thickness • Reduce rib thickness Melt too hot • Decrease nozzle and barrel temperatures • Decrease mold temperature Insufficient material volume • Increase shot size • Increase injection rate • Increase packing pressure • Increase gate size Flash Injection pressure too high • Decrease injection pressure • Increase clamp pressure • Decrease injection rate • Increase transfer position Excess material volume • Adjust transfer position • Decrease pack pressure • Decrease shot size • Decrease injection rate Melt and/or mold too hot • Decrease nozzle and barrel temperatures • Decrease mold temperature • Decrease screw speed Loose clamp • Reset mold height • Increase clamp tonnage Shrink Too much shrink • Increase cooling time • Decrease mold temperature Too little shrink • Decrease cooling time • Increase mold temperature Troubleshooting Recommendations 6 Nymax Polymer Formulations Troubleshooting Recommendations Problem Cause Solution Burning Process related • Decrease nozzle and barrel temperatures • Decrease mold temperature • Decrease injection rate Mold design • Clean, widen and increase number of vents • Increase gate size to reduce shear Wet material • Check moisture.

We can also help you navigate the regulatory environment for your industry, and you can take advantage of our expertise in polymer science, colorants and design to address emerging trends for market share gains.

T823.0 ETFE2183 COMPOUND 25% GLASS FIBER

This material, also known as a thermoplastic elastomer, has a soft, grippy feel and is highly colorable.