Low and stable εr • Ultra-low loss • Low water absorption • Hydrolysis resistant • Excellent impact strength • Mass production friendly APPLICATION BULLETIN A PREPERM radome grade gives you a longer and wider scanning range compared to common resins. 40 m Comparison of PREPERM radome grade and common resin at 24 GHz and 79 GHz bands Common Resin Common Resin PREPERM™ RB260 PREPERM™ RB260 PARAMETER PBT+GF PEI PREPERM RADOME GRADE ELECTRICAL εr @ 77 GHz 3.5–4.2 3.1 2.6 Tan @ 77 GHz 0.03 0.003 0.003 Isotropic @ 77 GHz No Yes Yes MECHANICAL Impact strength -20°C/+23°C notched izod 6kJ/m2/6kJ/m2 6kJ/m2/6kJ/m2 25kJ/m2/35kJ/m2 Elongation @ break 3% 40% 22% Brittleness Yes Yes No THERMAL Max use temp (HDT) 200–220°C 190–200°C 150–180°C Inherent flammability HB V0 V1 to V0 ENVIRONMENTAL Water absorption 0.4% 1.25% 0.2% Chemical resistance Good Excellent Good Hydrolysis resistant Specific Grade Yes Yes MANUFACTURING Batch-to-batch consistency Limited Excellent Excellent Moldability Excellent Good Good Abrasive Yes No No Mold shrinkage Inconsistent, warpage issue Homogenous Homogenous Raw material price Low High Moderate Copyright © 2022, Avient Corporation.

Certificate of Registration 9001:2015 MSP 9001:2015–MSP-ANAB-US (2.0) Page 1 of 2 Certificate of Registration of Quality Management System to ISO 9001:2015 The National Standards Authority of Ireland certifies that: Colorant Chromatics Ab Kroklundsvagen 346 AX-22 320 Odkarby Aland Finland has been assessed and deemed to comply with the requirements of the above standard in respect of the scope of operations given below: The Design, Manufacture and Sales of Fluoropolymer Color Concentrates and Compounds Additional sites covered under this multi-site certification are listed on the Annex (File No. 19.2540/C) Approved by: Geraldine LarkinChief Executive Officer Approved by: Lisa Greenleaf Operations Manager Registration Number: 19.2540/C Certification Granted: May 15, 1997 Effective Date: Oct 20, 2018 Expiry Date: Oct 19, 2021 National Standards Authority of Ireland, 20 Trafalgar Square, Nashua, New Hampshire, NH 03063, USA T +1 603 882 4412 9001:2015–MSP-ANAB-US (2.0) Page 2 of 2 Annex to Certificate Number: 19.2540/C Scope of Registration: The Design, Manufacture and Sales of Fluoropolymer Color Concentrates and Compounds Activity Location Central Management Group, Design, Manufacture Colorant Chromatics Kroklundsvagen 346 AX-22 320 Odkarby Aland Finland File No.: 19.2540/C Headquarters, Sales, Distribution Colorant Chromatics Europe B.V.

TECHNICAL PROPERTIES(1) TEST METHOD Edgetek™ ET8900-0011 HI UV NAT Edgetek™ ET8900-0012 HI UV White Edgetek™ ET8900-0013 HI UV Black Physical Density/Specific Gravity ASTM D792 1.13 g/cm3 1.15 g/cm3 1.13 g/cm3 Molding Shrinkage - Flow ASTM D955 1.4–2% 1.4–2% 1.4–2% Mechanical Tensile Strength (Yield) ASTM D638 5,900 psi 5,800 psi 5,800 psi Tensile Modulus(2) ASTM D638 169,000 psi 161,087 psi 176,000 psi Flexural Modulus(3) ASTM D790 187,000 psi 190,985 psi 188,000 psi Impact Notched Izod Impact 73°F (23°C), 0.125 in ASTM D256A 17.3 ft-lb/in 16.5 ft-lb/in 16.5 ft-lb/in Notched Izod Impact -22°F (-30°C), 0.125 in ASTM D256A 3.2 ft-lb/in 3.0 ft-lb/in 3.3 ft-lb/in Thermal (HDT) 66 psi (0.45 MPa), 0.125 in ASTM D648 121°C 135°C 129°C NORTH AMERICA GRADES (1) Data based on single lot of lab generated samples.

TECHNICAL BULLETIN 1.844.4AVIENT www.avient.com PROPERTY TEST METHOD UNITS VERSAFLEX ™ CE 3130-80N VERSAFLEX™ CE 3130-70N Shore Hardness ASTM D2240 Shore A 79 69 Specific Gravity ASTM D792 g/cm3 1.08 1.04 Tensile Strength ASTM D412 psi 2,484 2,222 Melting Flow Index (190°C, 21.6kg) ASTM D1238 g/10min 5.2 4.4 Elongation ASTM D412 % 864 667 Flexural Modulus @ 300% ASTM D790 psi 975 855 Viscosity @ 11,170 sec, 200°C ASTM D3835 Pa.s 30.6 22.2 Abrasion (Mass Lost) ASTM D3389 mg 1.1 2.6 UV Resistance 0.68W/m 2 45°C 168hours — Good Good Stain Resistance *Condition 1*Condition 2 — Excellent Excellent Blooming 85% RH30°C,168 hours — Non Non Processing (Demold) — — Excellent Good Cycle Time — — Short Middle Overmold Substrate — — PC/ABS PC/ABS KEY PROPERTIES AND OVERMOLD PERFORMANCE Copyright © 2021, Avient Corporation. Condition 2: Sunblock and hand cream stand on the surface for 24 hours at 50°C, then removed to observe the surface performance. UV Resistance Test - 0.68W/m2 @ 45°C expose 168 hours Anti-abrasion Test - H18 wheel load 1kg @ 500 cycles Surface/Non-blooming - Visual observation Touch Feel - Hand touch Mechanical Properties - Refer to hardness, gravity, tensile strength, elongation, MFI, and flexural modulus, which are tested using ASTM methods Processing - Demold speed & cycle time TEST RESULTS Comprehensively, the Versaflex CE 3130 non-blooming series performed better than competitive materials in balancing functional properties and processing.

c/o

c/o

285CGNS SP PANTONE(R) 285 C SIMULATION

MC-35217PV PANTONE 186 C

MC-34891PP FDA RHODAM RED C PP III

FANATICS 289 C UB