No. 0514.02) Revised 09/21/2021 Page 1 of 2 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 POLYMER DIAGNOSTICS INC. 33587 Walker Road Avon Lake, OH 44012 Ana De La Ree Phone: 440-930-3271 CHEMICAL Valid To: December 31, 2021 Certificate Number: 0514.02 In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following rubber and plastics tests: Test Description: Test Method or Standard: Analysis of Volatile Contaminants from Polymers (Chromatography) VDA 277 FTIR (Fourier Transform Infrared) Spectroscopy ASTM E1252 (Except 7.6, 11.2, and 11.4) Flammability Horizontal Burn of Self-Supporting Plastics ASTM D635; UL 94; IEC 60695-11-10 Horizontal Burn of Materials Used in Occupant Compartments of Motor Vehicles ASTM D5132; FMVSS 302 (49 CFR 571.302); ISO 3785 Vertical Burn, 20 mm ASTM D3801; UL 94; IEC 60695-11-10 Vertical Burn, 125 mm ASTM D5048; UL 94; IEC 60695-11-20 Oxygen Index ASTM D2863 FT1 Flame Test UL1581, Clause 1060; UL2556/CSA C22.2 No 2556, Clause 9.3 Cable Flame Test UL1581, Clause 1061 VW1 Flame Test UL1581, Clause 1080; UL2556/CSA C22.2 No 2556, Clause 9.4 FT2/FH Flame Test UL1581, Clause 1100; UL2556/CSA C22.2 No 2556, Clause 9.1 FV-1 Flame Test UL1581, Clause 1060; UL2556/CSA C22.2 No 2556, Clause 9.5 Thin Material Burning Test UL-94 Glow Wire Test IEC 60695 2-10, 2-11, 2-12, 2-13 RVCM in PVC ASTM D4443 (A2LA Cert. No. 0514.02) Revised 09/21/2021 Page 2 of 2 Test Description: Test Method or Standard: Thermal Analysis DSC (Differential Scanning Calorimetry) ASTM D3418, E794, E1356 TGA (Thermogravimetric Analysis) ASTM E1131 Karl Fischer Moisture Content ASTM D6869 Phthalate Determination by CPSIA CPSC-CH-C1001-09.3, CPSC-CH-C1001-09.4 1 The Consumer Product Safety Improvement Act (CPSIA) requires that every children's product subject to a federal consumer product safety requirement be tested by a Consumer Product Safety Commission (CPSC) accepted laboratory for compliance with the applicable federal children's product safety requirements.

AFNOR M 2 in France, DIN 4102 B 2 – B 1 in Germany, UNI 8457 – 9174 C 1 in Italy, BKZ 5.2 in Switzerland, BS 5852.1990 CRIB 3-5 in UK)** • Standard portfolio available for PP injection molded applications APPLICATION BULLETIN * Laboratory weathering testing may not be determinative of all conditions of use; the end user must determine suitability of a product for its intended use ** Contact us for more information on regulatory compliance Copyright © 2022, Avient Corporation. COLOR RAL REFERENCE COLOR RAL REFERENCE 1015 Brown/12 6026 Green/14 1034 Yellow/14 6032 Green/20 1018 Yellow/19 7004 Grey/21 1003 Yellow/20 8025 Brown/14 3020 Red/15 9022 Pearl Grey/1 5005 Blue/35 9010 White/5 5000 Blue/36

The resulting tensile test data shown in Figure 1 gives an indication of the variation in material response that can be observed as a function of the fibre orientations. In reality, the material response can fall anywhere between the curves shown in Figure 1. Figure 1: Tensile test data as a function of the fibre orientation 0° (orange), 45° (green), 90° (blue) https://www.hexagonmi.com Figure 4: Failure location in the flexural test for the isotropic modelling Figure 6: Failure location in the tensile test for the isotropic modelling approach (left), Digimat anisotropic modelling approach (middle) and reality (right) Figure 3: Flexural test results with the isotropic modelling approach (orange) and Digimat anisotropic modelling approach (green) Figure 5: Tensile test results with the isotropic modelling approach (orange) and Digimat anisotropic modelling approach (green) Figure 5 shows the tensile test results with, again, a convincing advantage for the Digimat anisotropic modelling approach against the isotropic modelling approach.

PRODUCT SELECTION GUIDE WIRE & CABLE SOLUTIONS Specialty Engineered Materials High performance insulation, jacketing, and cross-web formulations for the wire and cable industry Syncure™ XLPE Cross-linkable Polyethylene Formulations • Ambient curing • Flame performance • Resistant to heat, oil, creep, & abrasion • Low temperature properties • Low capital investment • High extrusion speeds • DBDPE-free grades available • UL/CSA bulletins Maxxam™ FR Flame Retardant Polyolefin Formulations • FEP alternative • Fire performance • UL 444 & plenum yellow card compliance • Low dielectric • High extrusion speeds • Thin wall extrudability Maxxam™ SY Foamable Flame Retardant Formulations • Low dielectric • Uniform cell structure • Crush & heat resistance • Ease of chemical foaming ECCOH™ Low Smoke and Fume Non-Halogen Formulations • Improved fire safety • Low smoke, fume, non-halogen (LSFOH) formulations • Chemical resistance ECCOH™ XL Cross-Linkable Solutions • Non-halogen, low smoke, toxicity, & corrosiveness • Excellent mechanical & electrical properties • Easily processed • Operating temperature of 90°C • Moisture cure technology Synprene™ Flame Retardant Thermoplastic Elastomers • Flexibility • Flame performance • Low temperature brittleness (LTB) resistance • Chemical resistance • Easily colored FireCon™ CPE Insulation Jacketing Formulations • Resistance to harsh environments • Low temperature performance • Flame performance • High extrusion speeds • Sunlight resistance FEATURES SPECIFICATION ECCOH™ XL 8148 Non-halogen, low smoke, toxicity, & corrosiveness EN50618 Syncure™ S100FH Horizontal flame UL 44 Syncure™ S100FH-XUV Horizontal flame, UV resistant UL 44 Syncure™ S100FH-UV Horizontal flame, FV-1 flame, UV resistant UL 44, UL 4703 Syncure™ S100FV VW-1 flame UL 44 Syncure™ S100FV-UV VW1, UV resistant UL 44 Syncure™ S112NA Non-flame retardant CSA 22.2 Syncure™ S120NA Non-flame retardant NSF 61 Syncure™ S200FH Horizontal flame, DBDPE-free UL 44 Syncure™ S200FV VW-1, DBDPE-free UL 44 INSULATION FOR POWER CABLE SYSTEMS Low Voltage Power Cables • Flame performance • Resistance to heat, oil, creep, & abrasion • Low temperature performance • Low capital investment • High extrusion speeds INSULATION & CROSS-WEBS FOR DATA CABLE SYSTEMS Category Cables • FEP alternative • Flame performance • Low dielectric constant • High extrusion speeds & thin wall capability • Chemical resistance • Low temperature performance • Flexibility FEATURES SPECIFICATION Maxxam™ FR 0521-48 R1 Low smoke & fume, non-halogen UL 444 Maxxam™ FR 0587-21 R3 Halogenated to plenum performance UL 444 Optical Fiber Cables • Resistance to harsh environments, chemicals, & sunlight • Low temperature brittleness (LTB) resistance • Low smoke & toxicity • Flexibility • High extrusion speeds FEATURES SPECIFICATION ECCOH™ 6649 UV Low DD Low smoke & fume, non-halogen Meets customer-specific flame requirements Coaxial Cables • Flexibility • High extrusion speeds • Low dielectric constant • Uniform cell structure • Crush & heat resistance FEATURES SPECIFICATION Maxxam™ SY 89-22-7 Foamable Meets customer-specific flame requirements JACKETING FOR POWER & DATA CABLE SYSTEMS Low & Medium Voltage Jacketing • Resistance to harsh environments, chemicals, & UV degradation • Low temperature brittleness (LTB) resistance • Low smoke & toxicity • Flexibility • High extrusion speeds • Easily colored FEATURES SUBMARKETS & USES FireCon™ CPE 30-33 RoHS Black Flame retardant, flexible Building & construction, industrial, nuclear FireCon™ CPE 37-36 RoHS Black Flame retardant, flexible Building & construction, industrial, nuclear FireCon™ CPE 30-20 RoHS Natural Flame retardant, flexible Building & construction, industrial, nuclear ECCOH™ 5549 UV Low smoke & fume, non-halogen, flame retardant Building & construction, industrial ECCOH™ 6649 UV Low DD Low smoke & fume, non-halogen, flame retardant Optical fiber, ducts ECCOH™ 5981 UV Low smoke & fume, non-halogen, flame retardant Industrial, Teck 90 wire Synprene™ RT5180 Flame retardant, LTB resistance Building & construction, industrial Synprene™ RT5180UV Flame retardant, LTB resistance Building & construction, industrial Synprene™ RT3870M Flame retardant, LTB resistance Building & construction, industrial 1.844.4AVIENT www.avient.com Copyright © 2023, Avient Corporation.

KEY CHARACTERISTICS Formulated with bio-based resin and/or 10–50% filler from renewable plant sources, Maxxam BIO formulations: • Reduce product carbon footprint • Achieve equivalent performance to standard polyolefin formulations • Provide good stiffness, durability, impact resistance and UV stability • Deliver good surface finish and are easy to color • Enable customized performance characteristics depending on application need • Offer food contact compliance MARKETS AND APPLICATIONS Maxxam BIO formulations are suitable for use across many industries and applications where traditional polyolefin materials are used, including: • Transportation Interior Applications - Decorative profiles, trunk side liners, pillars, T-cup • Industrial - Structural parts, furniture • Consumer - Household goods, personal care items, packaging, office supplies, food contact applications • Electrical and Electronic – Housings, buttons, junction boxes SUSTAINABILITY BENEFITS • Formulated with bio-based resin and/or 10–50% natural filler • Utilize natural filler from renewable plant sources including olive seed based powder and cellulose fiber • Offer a lower product carbon footprint compared to traditional petroleum-based feedstock • Can be recycled at end of life PRODUCT BULLETIN CHARACTERISTICS UNITS Maxxam BIO MX5200-5036 Natural FD Maxxam BIO MX5200-5030 Natural FD Maxxam BIO MX5200-5030 Natural FD X1 Maxxam BIO MX5200-5001 RS HS Natural Maxxam BIO MX5200-5033 RS HS Natural Maxxam BIO MX5200-5034 RS HS Natural Maxxam BIO MX5200-5035 RS HS Natural Filler/Reinforcement Unfilled Unfilled Unfilled 30% Glass Fiber 10% Mineral 20% Mineral 30% Mineral Density (ISO 1183) g/cm 0.90 0.90 0.90 1.12 0.96 1.03 1.12 Tensile Modulus (ISO 527-1) @ 23°C MPa 1500 1000 1000 6400 1350 1650 2100 Tensile Stress (ISO 527-2) @ 23°C MPa 27.0 20.0 20.0 75.0 13.0 14.0 15.0 Tensile Strain at Break (ISO 527-2) @ 23°C % 5 50 50 3.0 50 37 18 Charpy Notched (ISO 179) kJ/m 5 20 25 10 12 10 10 CHARACTERISTICS UNITS Maxxam BIO MX5200-5023 RS HS HI Natural 70 Maxxam BIO MX5200-5025 RS HS Natural 70 Maxxam BIO MX5200-5004 RS HS Natural 70 Maxxam BIO MX5200-5003 RS Natural 70 Maxxam BIO MX5200-5009 RS HS Natural 70 Maxxam BIO MX5200-5024 RS HS Natural 70 Maxxam BIO MX5200-5022 RS HS Natural 70 Filler/Reinforcement 15% Olive Seed Based 25% Olive Seed Based 30% Olive Seed Based/ 10% Mineral 35% Olive Seed Based/ 5% Mineral 15% Olive Seed Based/ 17% Glass Fiber/ Mineral 20% Olive Seed Based/ 20% Glass/ Mineral 10% Olive Seed Based/ 20% Mineral Density (ISO 1183) g/ccm 1.00 1.15 1.10 1.07 1.09 1.25 1.10 Tensile Modulus (ISO 527-1) @ 23°C MPa 1750 2000 2700 2500 3800 3500 4100 Tensile Stress at Break (ISO 527-2) @ 23°C MPa 21.0 20.0 30.0 20.0 40.0 35.0 42.0 Tensile Strain at Break (ISO 527-2) @ 23°C % 24 5 3 5 3 4 2 Notched Izod (ISO 180) kJ/m 15 7 3 2 5 15 7 MAXXAM BIO POLYOLEFINS – BIO-BASED RESIN – TECHNICAL PERFORMANCE MAXXAM BIO POLYOLEFINS – OLIVE SEED BASED FILLER – TECHNICAL PERFORMANCE CHARACTERISTICS UNITS Maxxam BIO MX5200-5029 NF HI UV Black X1 Maxxam BIO MX5200-5032 NFS UV Natural Maxxam BIO MX5200-5020 NF/NFS UV Natural X1​ Maxxam BIO MX5200-5016 NF Natural Filler/Reinforcement 10% Cellulose Fiber 20% Cellulose Fiber 30% Cellulose Fiber 40% Cellulose Fiber Density (ISO 1183) g/ccm 0.95 1.00 1.02 1.07 Tensile Modulus ISO 527-1) @ 23°C MPa 1550 1750 2640 3600 Tensile Stress at Break (ISO 527-2) @ 23°C MPa 33 30 48 55 Tensile Strain at Break (ISO 527-2) @ 23°C % 8 12 9 4 Charpy Notched Impact Strength (ISO 179/1eA) kJ/m2 5 6 5 5 Charpy Unnotched Impact Strength (ISO 179/1eU) kJ/m2 33 49 38 30 MAXXAM BIO POLYOLEFINS – CELLULOSE FIBER FILLER – TECHNICAL PERFORMANCE Copyright © 2023, Avient Corporation.

MARINE PLYWOOD Hammerhead™ panels are three times lighter than marine plywood MOISTURE ABSORPTION % weight change due to water absorption for selected composites and marine plywood 10000 60000 110000 160000 210000 260000 310000 360000 0.5 0.75 1 1.25 1.5 F le x u ra l R ig id it y - lb / in 2 Panel Thickness - in Hammerhead™ 5.3lb/in^3 Core Density Hammerhead™ 8.4lb/in^3 Core Density Plywood — Hammerhead™ 5.3 lb/ft3 Core Density — Hammerhead™ 8.4 lb/ft3 Core Density — Marine Plywood 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 0 10 20 30 40 50 60 70 80 90 100 % W e ig h t C h a n g e Immersion Time - Days .50" Hammerhead™ .75" Hammerhead™ 1" Hammerhead™ 1.50" Hammerhead™ .50" marine plywood .75" marine plywood 1" marine plywood Fl ex ur al R ig id ity - lb -in 2 INSTALLATION INSTRUCTIONS CUTTING & DRILLING Recommended blade: Industrial fine cut-off saw blade, 10" x 80 teeth 38° ATB grind with 5/8" bore, PTFE coating Recommended router bits: 3/8" diameter, 4 flute TiAlN (titanium aluminum nitride) coated carbide bit FORMING Apply localized 400˚F heat at a length proportional to the panel thickness (see equation below) and bend to shape. Heat Length = π 2 * Thickness Radius = S B S T = 400°F B S GL AS S/ EP OX Y TA B M AT ER IA L TAB TESTING OF VARIOUS INSTALLATION METHODS Hammerhead™ PETG Laminate Hammerhead™ PETG Laminate BOTTOM PANEL LEG LENGTH BREAK STRENGTH (LBS) PETG Skins with Plywood Core 1 in 1.5 in 2 in 2400 2820 2748 Hammerhead™ with 5.3 lb/ft3 Core Density 2 in 665 Hammerhead™ with 8.4 lb/ft3 Core Density 2 in 1084 Marine Plywood 2 in 770 Glass/Epoxy with Plywood Core 2 in 1055 Glass/Polyester with Balsa Core 2 in 919 L-Bracket Installation Hammerhead™ PETG Laminate Hammerhead™ PETG Laminate BOTTOM PANEL LEG LENGTH BREAK STRENGTH (LBS) PETG Skins with Plywood Core 2 in 2375 Marine Plywood 2 in 770 Glass/Polyester with Balsa Core 2 in 797 U-Channel Installation N O T AB BOTTOM PANEL LEG LENGTH BREAK STRENGTH (LBS) Hammerhead™ with 5.3 lb/ft3 Core Density 2 in 420 Hammerhead™ with 8.4 lb/ft3 Core Density 2 in 332 Marine Plywood 2 in 984 Glass/Polyester with Balsa Core 2 in 1298 Hammerhead™ with 5.3 lb/ft3 Core Density - ITW Plexus MA420 Adhesive NA 501 Hammerhead™ with 8.4 lb/ft3 Core Density - ITW Plexus MA420 Adhesive NA 1156 Hammerhead™ with 8.4 lb/ft3 Core Density - Crestomer 1152PA Adhesive NA 1530 Hammerhead™ with 8.4 lb/in3 Core Density - Crestomer M1-30 Adhesive NA 1471 Mixed Conditions ITW Plexus MA420 adhesive was used in all tab testing installations except where noted. BOTTOM PANEL LEG LENGTH BREAK STRENGTH (LBS) Hammerhead™ with 5.3 lb/ft3 Core Density 2 in 420 Hammerhead™ with 8.4 lb/ft3 Core Density 2 in 332 Marine Plywood 2 in 984 Glass/Polyester with Balsa Core 2 in 1298 Hammerhead™ with 5.3 lb/ft3 Core Density - ITW Plexus MA420 Adhesive NA 501 Hammerhead™ with 8.4 lb/ft3 Core Density - ITW Plexus MA420 Adhesive NA 1156 Hammerhead™ with 8.4 lb/ft3 Core Density - Crestomer 1152PA Adhesive NA 1530 Hammerhead™ with 8.4 lb/in3 Core Density - Crestomer M1-30 Adhesive NA 1471 ADHESIVE DESCRIPTION ADHESIVE GRADE MANUFACTURER AVERAGE BOND STRENGTH (PSI) STANDARD DEVIATION FAILURE MODE BEST ADHESION 2k Urethane 75421 Lord 2281 184 Substrate Cohesive 2k Acrylic SA1-705 GRY1 AccraLock 2211 78 Substrate 2k Acrylic Plexus MA420 ITW 2171 262 Substrate 2k Acrylic SA10-05 Blk1 AccraLock 2102 138 Substrate 2k Urethane 75451 Lord 2047 68 Cohesive 2k Acrylic SA1-705 GRY 1:2 AccraLock 1966 68 Substrate 2k Acrylic Scotchweld 8010 3M 1907 61 Adhesive Cyanoacrylate Gorilla Glue Gorilla Glue 1885 432 Cohesive 2k Acrylic Crestabond PP-04 Scott Bader 1873 281 Substrate 2k Acrylic SA10-05 Blk 10:2 AccraLock 1779 127 Cohesive 2k Urethane 75422 Lord 1716 190 Cohesive Adhesive 2k Urethane 75452 Lord 1535 98 Adhesive 2k Methacrylate Polyfuse Icon Containment 1610 98 Adhesive INTERMEDIATE ADHESION 2k Acrylic FA10-05 Blk C010817 AccraLock 724 58 Cohesive 2k Acrylic FA10-05 Blk1 AccraLock 722 44 Cohesive 2k Epoxy Loctite Epoxy Instant Mix Loctite 508 81 Adhesive 2k Epoxy Gorilla Glue Epoxy Gorilla Glue 341 198 Adhesive NOT RECOMMENDED 2k Epoxy Loctite Epoxy Marine Loctite 0 0 No bond ADHESIVE SELECTION Brands identified are owned by the manufacturers of the adhesive products. 1 surface sanded with 220 grit scuff prep 2 surface primed with 459T FASTENER TYPE BENEFITS CONSIDERATIONS Through-Bolting Best mechanical locking system Need back side access to panel Screw-In Anchor Highest pullout strength Requires pilot hole Cup Washer Spreads compressive load Requires relief hole; For substructure and hard point attachment Wide Grip (Bulb-Style) Rivet Ease of use—no installation torque limitations For lower load attachments Sheet Metal or Wood Screw Readily available, low cost Penetrate both skins for improved pullout Shoulder Washer Limits compressive load Requires relief hole; For substructure and hard point attachment For more information on installation, adhesives, and fasteners for specific applications, please contact Avient.

TIER 1 SUPPLIER S E A T B U C K L E S Y S T E M • Rapid development of 3 colors for global OEM platform, for 3 materials (POM, SAN, PP) • Help Tier 1 transition from printing to laser marking of buckles • Develop formulation that offers laser marking solution plus color • Quick reaction to develop three colors for this global vehicle launch • Smartbatch™ color + laser marking formulation met requirements for critical safety components Smartbatch™ Combination Colorants & Additives KEY REQUIREMENTS WHY AVIENT?

% ASTM D570 0.8 – 0.050–1.0 0.3 0.4 0.4 0.050 – 0.050 – – – Mechanical Properties Tensile Modulus(1) MPa ASTM D638 2650 9650 9790 8050 7380 1250 965 1770 2420 8620 4140 – Tensile Strength(1) (Yield) MPa ASTM D638 61.4 119 122 119 94 47 35 40 45 108 72.4 90 Tensile Elongation(1) (Break) % ASTM D638 3.0–5.0 1.0–3.0 1.5 3 2 35 40 30 26 3 – – Flexural Modulus MPa ASTM D790 2760 6890 6890 7380 6410 1300 1080 1740 1790 6690 4840 5500 Flexural Strength MPa ASTM D790 108 172 214 182 167 55 41.4 62.7 68.3 165 110 130 Coefficient of Friction ASTM D1894 vs. Steel – Static 0.25 0.46 0.18 0.15 0.12 0.19 0.11 0.14 0.13 0.24 0.17 0.17 Impact Notched Izod Impact (23°C, 3.18 mm, Injection Molded) J/m ASTM D256A 41 64(6) 110 107 107 70 80 37 37 75 – 69 Thermal Properties Heat Deflection Temperature ASTM D648 0.45 MPa °C 215(6) – 250 215 216 184 152 151(6) 153(6) 218(6) – – 1.8 MPa °C 65(6) 239(7) 244(6) 210 210 75 94 81.1(6) 88 197(6) – 135(5) Electrical Properties Surface Resistivity ohms/sq ASTM D254 – – – 1.30x1012 1.9x1012 5.2x1012 – – – – – 1.0x109 Dielectric Strength (Short Time) kV/mm – – 8.5 – – – – – – – – – Flammability Flame Rating Class UL 94 HB – – HB HB HB – HB – – – – LubriOne™ Internally Lubricated Formulations NOTES (1) Type I, 5.1mm/min (2) Type I, 21.3 mm/min (3) Type I, 50 mm/min (4) Type I, 5.1mm/min, Break (5) 3.2 mm thick, Unannealed (6) 6.35 mm thick, Unannealed (7) 3.2 mm thick, Annealed PRODUCT DESCRIPTION UNITS TEST METHOD LB6000- 5024 RS HI Natural LB6000- 5021 RS S1 Black LB6000- 5021 RS X2 Black LB6000- 5019 X1 Black LB6700- 5001 RS AF Black NN- 000/01M Black SO REC LB6600- 5030 RS Grey LB3300- 5010 RS Natural LB3300- 5005 RS Natural REC LB3220- 5001 RS C Natural X1 LB8900- 5010 GP Grey LB8900- 5006 RS PE Natural LB8900- 5004 RS PE Natural LB4200- 5022 Black LB4200- 5023 Natural Base Polymer PA 6 PA6/PA66 PA66 PBT PC PKE POM Lubricant UHMWPE1 UHMWPE UHMWPE UHMWPE UHMWPE MoS22 Graphite UHMWPE UHMWPE UHMWPE Graphite UHMWPE UHMWPE MoS2 UHMWPE Filler type GF10 GF30 GF30 GF50 GF50 Unfilled GF33 GF20 MI20 GF10 Unfilled GF20 GF30 Unfilled Unfilled General Properties Specific Gravity g/cm3 ISO 1183 1.18 1.35 1.39 1.55 1.58 1.14 1.44 1.42 1.46 1.23 1.26 1.34 1.43 1.4 1.35 Mechanical Properties Tensile Modulus (23°C) MPa ISO 527-1 4250 9500 9000 15500 16600 3500 10600 6300 3330 4000 1630 5300 9250 2470 2150 Tensile Strength (Yield, 23°C) MPa ISO-527-2 97 150 160 205 200 85 164 102 55 60 60 108 99.1 55 50 Tensile Elongation (Break, 23°C) % ISO-527-2 12 2.5 3 2.7 2.4 3.4 2.0 4.2 8 2.5 46 3.7 1.5 11 11 Flexural Strength (23°C) MPa ISO 178 103 – – 285 265 108 215 127 78 85 38 155 117 73 68 Flexural Modulus (23°C) MPa ISO 178 3250 – – 12400 11100 2690 9000 4700 3000 3100 1380 4600 5450 2210 2070 Impact Charpy Notched Impact Strength (23°C, Injection Molded) kJ/m^2 ISO 179 14 12 10 15 10 3 6 7.7 4.3 12 15 10 7.6 8 5 Charpy Unnotched Impact Strength (23°C, Injection Molded) kJ/m^2 ISO 179 82 55 61 75 60 65 50 47 69 - NB 63 36 NB NB Thermal Properties Deflection Temperature Under Load 1.8 Mpa, Unannealed °C ISO 75-2/A 107 – – 204 – 73 235 – – – 90 210 204 86 80 Cofficient of Friction (CoF) & Wear Rate CoF vs.

The company noted that GAAP EPS includes $0.24 of special items (see Attachment 3) and $0.16 of intangible amortization expense (see Attachment 1). You are advised to consult any further disclosures we make on related subjects in our reports on Form 10-Q, 8-K and 10-K that we provide to the Securities and Exchange Commission. 6 Investor Relations Contact: Giuseppe (Joe) Di Salvo Vice President, Treasurer and Investor Relations Avient Corporation +1 440-930-1921 giuseppe.disalvo@avient.com Media Contact: Kyle G. Rose Vice President, Marketing and Communications Avient Corporation +1 440-930-3162 kyle.rose@avient.com mailto:giuseppe.disalvo@avient.com mailto:kyle.rose@avient.com 7 Attachment 1 Avient Corporation Summary of Condensed Consolidated Statements of Income (Unaudited) (In millions, except per share data) Three Months Ended March 31, 2023 2022 Sales $ 845.7 $ 892.2 Operating Income 57.1 102.2 Net income from continuing operations attributable to Avient shareholders 20.8 64.4 Basic earnings per share from continuing operations attributable to Avient shareholders $ 0.23 $ 0.70 Diluted earnings per share from continuing operations attributable to Avient shareholders $ 0.23 $ 0.70 Senior management uses comparisons of adjusted net income from continuing operations attributable to Avient shareholders and diluted adjusted earnings per share (EPS) from continuing operations attributable to Avient shareholders, excluding special items, to assess performance and facilitate comparability of results.

As of suppliers outside QuébecJanuary 1, 2019, certain must register for the QST and collect the tax on certain taxable supplies they make in Québec. Registration number 1019288451 TQ 0004 Status Valid Effective date of status 2017-08-01 Date viewed 2021-02-04 Business's name AVIENT CANADA ULC Business name SPARTECH PLASTIQUES Registration number to validate 1019288451TQ0004 Page 1 of 1Validate a QST Registration Number - Revenu Québec 2/4/2021https://entreprises.revenuquebec.ca/EntNa/SX/SX00/SX00.SXCLT20A.ValiderInscription/...