382C UV LIME NY 2 PP FR 8-6 LMS-1000

MEVOPUR COLORANTS • Standard colors in PP and PE to shorten time-to-market • Custom colors matched to Pantone, RAL or other color reference • White colorants for pharmaceutical packaging for LDPE, HDPE and PP with opacity to reach USP chapter MEVOPUR FUNCTIONAL ADDITIVES • Antistatic formulation with good flow/impact for injection molding • Amide- and amine-free antistatic for film in contact with API (Active Pharmaceutical Ingredients) • UV blocking for transparent PP and PE packaging to meet USP chapter • Non-migrating friction reduction/processing aid for PE and PP • Laser marking/welding additive for fast, reliable marking/assembly • MVTR (Moisture Vapor Transmission Rate) reduction for HDPE to improve shelf-life • Thermal protection of the polymer during processing • Gamma/e-beam sterilization protection for PP (up to 50kGy) with color compensation for reduced yellowing REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Drug Master File (Type III) and/or Device Master File • Food contact established with FDA/EU* APPLICATION BULLETIN * FDA/EU compliance information available upon request Bormed™ is a registered trademark of Borealis Healthcare use limitations apply—see below.

Versaflex™ HC Thermoplastic Elastomers Trilliant™ HC Healthcare Thermoplastics Healthcare TPEs: Versaflex™ HC

Trilliant™ HC Healthcare Thermoplastics Versaflex™ HC Thermoplastic Elastomers Versaflex™ HC TPEs met regulatory needs and provided a recycled TPE solution for sealing ring

Avient Corporation highlights sustainable innovations at NPE 2024, including Nymax™ REC Recycled Nylon Formulations, Versaflex™ HC BIO BT218 TPEs, Avient launches new Cesa™ Non-PFAS Process Aid for PE and PP extrusion applications at NPE 2024, enabling processing performance, productivity, and

Barrel Temperatures °F (°C) PP Mineral-Filled PP Glass-Filled PP HDPE LDPE Rear Zone 360–390 (182–200) 400–420 (204–216) 400–420 (204–216) 370–390 (188–199) Center Zone 370–400 (188–204) 410–430 (210–221) 425–445 (218–229) 410–430 (210–221) 380–400 (193–204) Front Zone 390–410 (200–210) 420–440 (216–227) 435–455 (224–235) 420–440 (216–227) 390–410 (199–210) Nozzle 400–425 400–425 Melt Temperature 400–425 400 - 425 Mold Temperature °F (°C) 60–120 (16–49) Pack & Hold Pressure 50–75% of injection pressure Injection Velocity (in/s) 1.0–3.0 Back Pressure (psi) 50–100 Screw Speed (rpm) 30–100 Drying Parameters Hours @ °F (°C) Not typically required. Drying non-halogenated materials is suggested. 2 hours @ 100 (38) Moisture Range (%) Not required Follow up by purging machine with general purpose PP • Residence time should not exceed 5 minutes for Maxxam FR products • General ventilation is suggested Shut Down • Purge the equipment with a general purpose PP • All tooling and equipment must be free of any residual Maxxam FR upon shut down • Continue generating parts made from the natural PP until clear • Wipe down tool steel with mold cleaner • When using a hot runner system, care must be taken to remove residual product from the manifold MOLD DESIGN RECOMMENDATIONS Cold Slug Wells • Place cold slug wells at the base of the sprue to capture the cold material first emerging from the nozzle • Place cold slug wells at every 90° bend in the runner system • Well depths approximately 2–3 times the diameter of the runner provide best results Draft Angle • Draft angle should be 1/2°–1° per side.

ENGINEERED POLYMER SOLUTIONS - FEATURES & CHARACTERISTICS Resin Nymax™ Formulations Characteristics Applications PA6 GF 600 A 14 Natural 14% Glass Reinforced Stocks, Frames, Receivers, Handguards, Forearms, Picatinny Rails, Grips PA6 GF 600 A 33 Natural 33% Glass Reinforced, Heat Stabilized PA6 NM6000-0026 HI BK 33% Glass Reinforced, Toughened PA6 GF 600 A 60 UV Black 60% Glass Reinforced, Heat Stabilized PA6 GF 600 A 33 Black 28 V 33% Glass Reinforced, Heat Stabilized, UV PA6 1010 A Black 13 Super Toughened, Heat Stabilized PA6 1010 A Natural Super Toughened, Heat Stabilized PA6 NM6000-0027 ST Black Super Toughened PA6 NM6000-00013 HS UV Black 50% GF, High Flow PA6 PA66 NM6600-0018 HI HS 14 Nat 14% Glass Reinforced, Toughened, Heat Stabilized PA66 GF 1200 A 33 HS Black 22 33% Glass Reinforced, Heat Stabilized PA66 GF 1200 A 33 HS Natural 33% Glass Reinforced, Heat Stabilized PA66 NM6600-0019 HI HS 33 Nat 33% Glass Reinforced, Toughened, Heat Stabilized PA66 NM6600-0020 HI HS 43 Nat 43% Glass Reinforced, Heat Stabilized PA66 1200 A L Natural Unreinforced PA66 1200 A ZIP 22 Natural Unreinforced PA66 NM6600-0021 ST Black Super Toughened PA66 NM 1200 MT HS Black Toughened, Heat Stabilized PA66 NM 1200 MT HS Natural Toughened, Heat Stabilized Specialty Products Color Characteristics Applications Edgetek™ ET6200-0031 Black Black 20% Glass Reinforced PA12 Stocks, Frames, Receivers, Handguards, Forearms, Picatinny Rails, Bolt Carriers, Grips Gravi-Tech™ X GT 33991-05A-01-3 Copper 3sg, PA6, Copper Gravi-Tech™ X GT-30197-001-P4 Gray 4sg, PA610, Tungston Gravi-Tech™ GT 6400-0001 GRV 5.0 Black 5sg, PA610, Tungston Thermoplastic Elastomers Durometer OM Substrate Color Characteristics Applications OnFlex™ AF 7210 25-90A PP Black/Natural General Purpose with UV Stabilizer Grips, Recoil Pads, Gun Straps Dynaflex™ G7900 30-90A PP Black/Natural General Purpose Versaflex™ XP 2850 50A PP Natural Wet Grip Technology Versaflex™ VDT 4202-40 40A PP Black/Natural Vibration Damping Versaflex™ VDT 5120-40 40A PA Black/Natural Vibration Damping Versaflex™ OM6059-9 60A PA Black High Flow Versaflex™ OM6258 60A PA Black/Natural Enhanced Bond

功能 目标应用 血液采集 试剂容器/ 试剂盒 移液器/ 器具 设备/配件 即用型配方避免对分析测试的干扰； 可萃取金属数据          聚合物对激光能量的激活可提供高 对比度、无溶剂的 高速鉴别     定制母粒和即用型配方可提供 透明和不透明颜色，同时允许激光 传输/吸收    PE和PP的新一代快速成核剂；提 高尺寸稳定性，热性能和机械性能  降低湿蒸汽透过率（MVTR） HDPE即用型配方 吸湿母粒 减少 BCT（血液收集管）中因氧传 输造成的真空损失，并保护试剂免 受氧化降解 在290-450nm波长范围内阻挡紫 外线，对透明度没有影响；保护光 敏试剂     自检/即时检验 （POCT） 用于实验室自动化/ 鉴别编码的着色剂 颜色—低迁移/减 低干扰 颜色—生物相容 性评估 透明PP PP、ABS、 PC/ABS的抗静电 性能 激光焊接可 快速、可靠地组装 一系列聚合物 半结晶聚合物 的成核剂，例如 HDPE、PP、POM 防止氧气进入的 PET吸氧剂 透明容器（PP、 PE、PETG、COP） 中的紫外光防护 防潮以改善屏障 激光打标的UDI替 代油墨印刷/贴标 PP、ABS、PC和 高温聚合物的颜 色，符合UL认证 为各种聚合物提供多种颜色，能够 为您的工艺提供适用的即用型配方 或母粒 降低不符合现行和拟定法规（如 IVDR）的风险 即用型解决方案/母粒支持针对电器 外壳的UL要求 永久性/非迁移性即用型配方；不受 相对湿度（%）影响的快速静电衰 减时间 不含山梨醇，最大限度地减少潜在 迁移 1.844.4AVIENT www.avient.com 版权所有© 2021埃万特公司。

OD GREEN - NS -2 GEON HC XV1144 CLEAR 1883 PP FR 8-6 LMS-1000

030GN2027 GREEN UV Geon(TM) HC DB4822B PLUM NON-PHTHALATE PP 301 LM-NAT-G-HP