Regular engagement with these key stakeholders builds positive community relations, sets the expectation for open dialogue related to the effectiveness of our policy implementation, and assists with preparedness and collaboration in the event of an issue in our operations in that community.

Energy: o Diesel Fuel Consumption: 2,868,323 kWh o Natural Gas Fuel Consumption: 178,696,287 kWh o Renewable Energy Consumed - Self Generated (solar): 681,059 kWh o Renewable Energy Consumed - Self Generated (Wind): 2,385,048 kWh o Grid Electricity Consumed: 409,650,679 kWh o Renewable Energy Credits (REC) Purchased: 112,413,420 kWh o Renewable Electricity Consumed – Offsite: 138,415,253 kWh Page 2 Period covered by GHG emissions verification: • January 1, 2023 to December 31, 2023 Global Warming Potential (GWP) and emission factor data sets: • IPCC GWP: AR6 • USEPA Emission Factor Hub, released 2024 • USEPA eGRID, released 2024 • Final Rule (40 CFR 98) - Industrial Sector 2013 • DEFRA, released 2023 • IEA, released 2023 • European Residual Mix, released 2022 v2.0 GHG Reporting Protocols against which verification was conducted: • World Resources Institute (WRI)/World Business Council for Sustainable Development (WBCSD) Greenhouse Gas Protocol, Corporate Accounting and Reporting Standard, Revised Edition (Scope 1 and 2) and the GHG Protocol Scope 2 Guidance, an amendment to the GHG Protocol Corporate Standard • WRI/WBCSD Corporate Value Chain (Scope 3) Accounting and Reporting Standard Verification Protocols used to conduct the verification: • ISO 14064-3 Second Edition 2019-04: Greenhouse gases - Part 3: Specification with guidance for the verification and validation of greenhouse gas statements • Apex’s standard procedures and guidelines for external Assurance of Sustainability Reports and International Standard on Assurance Engagements (ISAE) 3000 Revised, Assurance Engagements Other than Audits or Reviews of Historical Financial Information (effective for assurance reports dated on or after Dec. 15, 2015), issued by the International Auditing and Assurance Standards Board.

They are engineered to provide simplified installation, long service life, and overall cost effectiveness.

Senior management believes these measures are useful to investors because they allow for comparison to PolyOne's performance in prior periods without the effect of items that, by their nature, tend to obscure PolyOne's operating results due to the potential variability across periods based on timing, frequency and magnitude. Senior management believes these measures are useful to investors because they allow for comparison to Avient's performance in prior periods without the effect of items that, by their nature, tend to obscure Avient's operating results due to the potential variability across periods based on timing, frequency and magnitude. Reconciliation to Adjusted EPS Excluding Special Items and Impacts of February 2020 Equity Offering and May 2020 Debt Offering Three Months Ended June 30, 2020 Net income from continuing operations attributable to Avient common shareholders $ 23.0 Special items, after tax(1) 2.6 After tax interest expense, net arising from equity offering and debt offering proceeds 4.1 Adjusted net income excluding special items and impact of interest expense, net arising from equity offering and debt offering proceeds $ 29.7 Diluted weighted-average shares used to compute earnings per common share 91.8 Weighted-average impact of 15.3 million shares issued in February 2020 equity offering (15.3) Diluted weighted-average shares excluding impact of shares issued in February 2020 equity offering 76.5 Adjusted EPS excluding special items and impact of equity offering and debt offering $ 0.39 (1) Special items include charges related to specific strategic initiatives or financial restructuring such as: consolidation of operations; debt extinguishment costs; costs incurred directly in relation to acquisitions or divestitures, including adjustments related to contingent consideration; employee separation costs resulting from personnel reduction programs, plant realignment costs, executive separation agreements; asset impairments; settlement gains or losses and mark-to-market adjustments associated with actuarial gains and losses on pension and other post-retirement benefit plans; environmental remediation costs, fines, penalties and related insurance recoveries related to facilities no longer owned or closed in prior years; gains and losses on the divestiture of operating businesses, joint ventures and equity investments; gains and losses on facility or property sales or disposals; results of litigation, fines or penalties, where such litigation (or action relating to the fines or penalties) arose prior to the commencement of the performance period; one-time, non- recurring items; and the effect of changes in accounting principles or other such laws or provisions affecting reported results.

Subject to compliance with the above mentioned quantity tolerance thresholds, the quantity delivered by Seller shall be deemed to be the quantity effectively ordered by Buyer. 13. SHORTAGE OF THE PRODUCT Unless otherwise prescribed under a pre-existing master agreement then in effect between Buyer and Seller, during periods when demand for the Product munkaerőhiány, energia, üzemanyag vagy nyersanyagok hiánya, (6) az Eladó üzemének rendes karbantartása miatti teljes vagy részleges leállás, (7) avagy bármely típusú más ok vagy okok, amelyek nyilvánvalóan a nem teljesítő fél ráhatásán kívül esnek, függetlenül attól, hogy hasonló vagy különböző formában jelennek meg, mint az itt felsorolt esetek („vis major”). Except in the case of a pre-existing master agreement in effect between Buyer and Seller, no statement or agreement, oral or written, made before or at the signing of the relevant purchase order(s) shall vary or modify the written terms hereof, and neither party shall claim any amendment, modification or release from any provision hereof unless such change occurs in a writing signed by the other party and specifically identifying it as an amendment to these Terms and Conditions.

 Factors that could cause actual results to differ materially from those implied by these forward-looking statements include, but are not limited to:  The final amount of charges resulting from the planned North American asset realignment and the Company’s ability to realize anticipated savings and operational benefits from the asset realignment;  Our ability to achieve the strategic and other objectives relating to the acquisition of Spartech Corporation, including any expected synergies;  Our ability to successfully integrate Spartech and achieve the expected results of the acquisition, including, without limitation, the acquisition being accretive;  Disruptions, uncertainty or volatility in the credit markets that could adversely impact the availability of credit already arranged and the availability and cost of credit in the future;  The financial condition of our customers, including the ability of customers (especially those that may be highly leveraged and those with inadequate liquidity) to maintain their credit availability;  The speed and extent of an economic recovery, including the recovery of the housing market;  Our ability to achieve new business gains;  The effect on foreign operations of currency fluctuations, tariffs, and other political, economic and regulatory risks;  Changes in polymer consumption growth rates in the markets where we conduct business;  Changes in global industry capacity or in the rate at which anticipated changes in industry capacity come online;  Fluctuations in raw material prices, quality and supply and in energy prices and supply;  Production outages or material costs associated with scheduled or unscheduled maintenance programs;  Unanticipated developments that could occur with respect to contingencies such as litigation and environmental matters;  An inability to achieve or delays in achieving or achievement of less than the anticipated financial benefit from initiatives related to working capital reductions, cost reductions, employee productivity goals, and an inability to raise or sustain prices for products or services;  An inability to raise or sustain prices for products or services;  An inability to maintain appropriate relations with unions and employees;  The inability to achieve expected results from our acquisition activities;  Our ability to continue to pay cash dividends;  The amount and timing of repurchases of our common shares, if any; and  Other factors affecting our business beyond our control, including, without limitation, changes in the general economy, changes in interest rates and changes in the rate of inflation.  The above list of factors is not exhaustive.  We undertake no obligation to publicly update forward-looking statements, whether as a result of new information, future events or otherwise.  Addressable market exceeds $40 billion  Strong performance demonstrates that our strategy and execution are working  Megatrends and emerging opportunities align with our strengths  Innovation and services provide differentiation, incremental pricing power, and competitive advantage  Strong and proven management team driving growth and performance PolyOne Corporation Page 18 Appendix PolyOne Corporation Page 19 $0.17 $0.22 $0.24 $0.31 $0.44 $0.46 $0.00 $0.25 $0.50 Q1'10 Q1'11 Q1'12 Q1'13 Q1'14 Q1'15 Adjusted EPS $30 $34 $25 $30 $35 Q1 2014 Q1 2015 GCAI Operating Income (in millions) $18 $23 $15 $20 $25 Q1 2014 Q1 2015 GSEM Operating Income (in millions) Q1 2015 Financial Highlights  Global Specialty Engineered Materials’ operating margin of 16.3% above the 2015 target  Global Color Additives and Inks’ operating margin grew to 16.2%  First quarter adjusted EPS has grown on average 23% per year since 2010 +26% +11% PolyOne Corporation Page 20 Appliances 2% Building & Construction 12% Consumer 7% Electrical & Electronics 1% Healthcare 6% Industrial 14% Packaging 31% Textiles 7% Transportation 8% Wire & Cable 12% 1.7% 4.6% 5.1% 5.5% 7.2% 8.1% 9.7% 12.2% 16.2% 20%+ 2006 2007 2008 2009 2010 2011 2012 2013 2014 Q1 2015 2020 Operating Income % of Sales At a Glance Global Color, Additives and Inks 2014 Revenues: $0.9 Billion Solutions Expanding Profits 2014 Revenue by Industry Segment 14.7% Platinum Vision United States 44% Europe 36% Canada 2% Asia 12% Latin America 6% PolyOne Corporation Page 21 Appliances 4% Building & Construction 3% Consumer 18% Electrical & Electronics 16% Healthcare 12% Industrial 8% Packaging 5% Transportation 20% Wire & Cable 12% At a Glance Global Specialty Engineered Materials 2014 Revenues: $0.6 Billion Solutions 2014 Revenue by Industry Segment Expanding Profits 1.1% 1.3% 3.4% 5.1% 9.6% 8.0% 8.6% 9.3% 16.3% 20%+ 2006 2007 2008 2009 2010 2011 2012 2013 2014 Q1 2015 2020 Operating Income % of Sales Platinum Vision 12.1% United States 44% Europe 33% Canada 2% Asia 19% Latin America 2% PolyOne Corporation Page 22 Appliances 2% Building & Construction 8% Consumer 5% Healthcare 6% Industrial 23% Packaging 27% Transportation 30% United States 96% Canada 4% At a Glance Designed Structures and Solutions Solutions 2014 Revenues: $0.6 Billion Expanding Profits 2014 Revenue by Industry Segment 1.4% 5.6% 7.3% 2.7% 12-14% 2012 2013 2014 Q1 2015 2020 Operating Income % of Sales Platinum Vision PolyOne Corporation Page 23 Appliances 8% Building & Construction 33% Consumer 5% Electrical & Electronics 3% Healthcare 1% Industrial 11% Packaging 5% Transportation 18% Wire & Cable 16% 5.5% 6.9% 3.8% 3.6% 5.5% 4.3% 6.3% 7.2% 6.5% 2006 2007 2008 2009 2010 2011 2012 2013 2014 Q1 2015 2020 Operating Income % of Sales At a Glance Performance Products and Solutions Solutions Expanding Profits 2014 Revenues: $0.8 Billion 10-12% Platinum Vision 2014 Revenue by Industry Segment 7.7% United States 80% Canada 14% Asia 2% Latin America 4% PolyOne Corporation Page 24 Appliances 6% Building & Construction 5% Consumer 13% Electrical & Electronics 6% Healthcare 23% Industrial 15% Packaging 4% Transportation 25% Wire & Cable 3% 2.6% 3.0% 3.5% 4.0% 4.6% 5.6% 6.4% 5.9% 5.9% 6.5-7.5% 2006 2007 2008 2009 2010 2011 2012 2013 2014 Q1 2015 2020 Operating Income % of Sales 15% 50% 2006 Q1 2015 At a Glance Distribution Key Suppliers 2014 Revenues: $1.1 Billion ROIC Expanding Profits 6.1% Platinum Vision http://www.polyone.com/Pages/VariationRoot.aspx PolyOne Corporation Page 25 2 lbs Plastic = 3 lbs aluminum or 8 lbs steel or 27 lbs glass 33% less material by weight than aluminum 75% less material by weight than steel 93% less material by weight than glass Requires 91% less energy to recycle a pound of plastic versus a pound of paper Source: SPI: Sustainability and the Plastics Industry Plastics: Key to Future Sustainable Development PolyOne Corporation Page 26 Commitment to Operational Excellence 81% 93% 2006 2014 16.2% 9.9% 2006 2014 On-Time Delivery Working Capital % of Sales 5% 43% 2006 2014 Percent of Associates Trained in LSS  Four consecutive years – CFO Magazine Best Working Capital Management in the chemical industry World’s Best Business Process Excellence Program in 2012*  103 trained Black Belts  247 trained Green Belts  127 trained Kaizen Leaders World’s Best Start-up Program for Lean Six Sigma Deployment in 2009* *Both awards received from International Quality and Productivity Center PolyOne Corporation Page 27 Application Examples PolyOne Corporation Page 28  $1.5 billion attractive, growing market  Additives improve performance and reduce cost through light-weighting, reduced waste, faster cycle times, and extended shelf life of finished product  Aligned with megatrend of protecting the environment:  Sustainability benefits include lower package weight and improved recyclability of package at end of use Market Opportunity Leading Global Supplier of Additives In Growing PET Market Shelf-life extension Greater product consistency Recyclability and reduced carbon footprint Color and Special Effects Weight reduction Enhanced product aesthetics High heat resistance PET Bottling Technology 0.0 10.0 20.0 30.0 40.0 50.0 60.0 70.0 2009 2014 2019 Asia Pacific North America Latin America Western Europe Eastern Europe Middle East and Africa Global PET Packaging Growth 2009-2019 Source: Euromonitor retail off-trade consumption (PET bottles & jars, home care, personal care, food & non-alcoholic beverages) B ill io n un its 5% CAGR PolyOne Corporation Page 29 • Includes formulation and consultative services to assist manufacturers and brand owners in positively identifying their finished goods • Protects brand equity & consumer welfare • Reduces exposure to unwarranted recall expenses • Secures supply chain integrity – support for safe expansion into new geographies Authentication Technology PolyOne Corporation Page 30 • Color harmonization across 15 unique color-and-polymer combinations • Eliminated need for multiple pre- colored materials • Reduced Land Rover’s working capital 2015 Range Rover Evoque Interior PolyOne Corporation Page 31 • Reduced health and environmental impact • System cost reduction • Radiation-shielding performance • Parts consolidation • Design freedom CT Scanner PolyOne Corporation Page 32 Metal Replacement Solutions • Replaces metal in LED lighting • Extends LED durability and life span eliminating hot spots • Greater design flexibility with fewer parts • Weight reduction • Simplifies manufacturing and lowers total production cost PolyOne Corporation Page 33 Next Generation Solar Charger • Ginkgo Solar Tree charger utilizing our unique reSound™ material • reSound™ is a durable material consisting of 50% bio-derived plastic and 50% traditional petroleum-based plastic • Use of reSound™ reduced the carbon footprint for this product by 35% • reSound™ Is classified as a PolyOne Sustainable SolutionSM PolyOne Sustainable SolutionSM PolyOne Corporation Page 34 High-Barrier Packaging Containers • Capability to extrude up to 13 layers • Strong oxygen and moisture vapor transmission protection • Can be made symmetrical or asymmetrical to meet customized needs of broad variety of applications • Barrier protection and superior organoleptic properties PolyOne Corporation Page 35 Aerospace Applications • Leading provider of specialty materials for the aerospace industry • Typical applications  Mil-spec aircraft windows, canopies, windscreens, instrument panels, wingtip lenses  Interior – gallery furnishings, tray tables, arm rests, trim strips, joint/edge coverings • Benefits:  High impact strength  Resistant to UV rays  Flame and smoke compliance  Easy to clean with aggressive cleaners; anti-microbial grades available  Range of sizes, thicknesses, colors, etc. 1 Schedule I Reconciliation of Non-GAAP Financial Measures (Unaudited) (Dollars in millions, except per share data) Below is a reconciliation of non-GAAP financial measures to the most directly comparable measures calculated and presented in accordance with U.S. Special items include charges related to specific strategic initiatives or financial restructuring such as: consolidation of operations; debt extinguishment costs; employee separation costs resulting from personnel reduction programs, plant phase-in costs, executive separation agreements; asset impairments; mark-to-market adjustments associated with actuarial gains and losses on pension and other post-retirement benefit plans; environmental remediation costs, fines, penalties, remediation costs and related insurance recoveries related to facilities no longer owned or closed in prior years; gains and losses on the divestiture of operating businesses, joint ventures and equity investments; gains and losses on facility or property sales or disposals; results of litigation, fines or penalties, where such litigation (or action relating to the fines or penalties) arose prior to the commencement of the performance period; unrealized gains and losses from foreign currency option contracts; one-time, non-recurring items; and the effect of changes in accounting principles or other such laws or provisions affecting reported results. (2) Tax adjustments include the net tax expense (benefit) from one-time income tax items and deferred income tax valuations allowance adjustments. 3 Net debt to adjusted EBITDA is calculated as follows: Three Months Ended Twelve Months Ended Three Months Ended Trailing Twelve Months (TTM) Ended (In millions) March 31, 2014 December 31, 2014 March 31, 2015 March 31, 2015 Short-term portion and current portion of long-term debt $ 12.8 $ 61.8 $ 61.9 Long-term debt 968.1 962.0 1,049.2 Less: Cash and cash equivalents (238.3) (238.6) (226.4) Net Debt $ 742.6 785.2 884.7 Income before income taxes $ 39.9 $ 88.4 $ 53.3 $ 101.8 Interest expense, net 15.5 62.2 16.1 62.8 Depreciation and amortization 32.8 123.9 25.1 116.2 Special items, impact on operating income 22.9 164.9 9.3 151.3 Accelerated depreciation included in special items (6.8) (23.1) (0.1) (16.4) Adjusted EBITDA $ 104.3 $ 416.3 $ 103.7 $ 415.7 Net Debt/TTM Adjusted EBITDA 2.1 Goldman Sachs - May 19 2015 r4 Goldman Sachs - May 19 2015 POL IR Presentation - Updated for 2015 - 5-13-15 GS ��PolyOne Investor Presentation�Goldman Sachs Basic Materials Conference�May 2015�� Forward-Looking Statements Use of Non-GAAP Measures PolyOne Commodity to Specialty Transformation PolyOne�At A Glance Mix Shift Highlights Specialty Transformation Confirmation of Our Strategy Strategy and Execution Drive Results Proof of Performance & 2020 Goals Platinum Vision: Pathway to Accelerated Growth Innovation Drives Earnings Growth Megatrends Aligned with Key End Markets A Rich Pipeline of Opportunity Debt Maturities & Pension Funding Free Cash Flow and Strong Balance Sheet �Fund Investment / Shareholder Return PolyOne Core Values Why Invest In PolyOne?

 Factors that could cause actual results to differ materially from those implied by these forward-looking statements include, but are not limited to:  Our ability to realize anticipated savings and operational benefits from the realignment of assets, including the closure of manufacturing facilities;  The timing of closings and shifts of production to new facilities related to asset realignments and any unforeseen loss of customers and/or disruptions of service or quality caused by such closings and/or production shifts;  Separation and severance amounts that differ from original estimates;  Amounts for non-cash charges related to asset write-offs and accelerated depreciation realignments of property, plant and equipment, that differ from original estimates;  Our ability to identify and evaluate acquisition targets and consummate acquisitions;  The ability to successfully integrate acquired companies into our operations, retain the management teams of acquired companies, retain relationships with customers of acquired companies, and achieve the expected results of such acquisitions, including whether such businesses will be accretive to our earnings;  Disruptions, uncertainty or volatility in the credit markets that could adversely impact the availability of credit already arranged and the availability and cost of credit in the future;  The financial condition of our customers, including the ability of customers (especially those that may be highly leveraged and those with inadequate liquidity) to maintain their credit availability;  The speed and extent of an economic recovery, including the recovery of the housing market;  Our ability to achieve new business gains;  The effect on foreign operations of currency fluctuations, tariffs and other political, economic and regulatory risks;  Changes in polymer consumption growth rates and laws and regulations regarding the disposal of plastic in jurisdictions where we conduct business;  Changes in global industry capacity or in the rate at which anticipated changes in industry capacity come online;  Fluctuations in raw material prices, quality and supply and in energy prices and supply; production outages or material costs associated with scheduled or unscheduled maintenance programs;  Unanticipated developments that could occur with respect to contingencies such as litigation and environmental matters;  An inability to achieve or delays in achieving or achievement of less than the anticipated financial benefit from initiatives related to working capital reductions, cost reductions and employee productivity goals;  An inability to raise or sustain prices for products or services;  An inability to maintain appropriate relations with unions and employees;  Our ability to continue to pay cash dividends;  The amount and timing of repurchases of our common shares, if any; and  Other factors affecting our business beyond our control, including, without limitation, changes in the general economy, changes in interest rates and changes in the rate of inflation.  The above list of factors is not exhaustive.  We undertake no obligation to publicly update forward-looking statements, whether as a result of new information, future events or otherwise.  Addressable market exceeds $40 billion  Strong performance demonstrates that our strategy and execution are working  Megatrends and emerging opportunities align with our strengths  Innovation and services provide differentiation, incremental pricing power, and competitive advantage  Strong and proven management team driving growth and performance PolyOne Corporation Page 22 Appendix PolyOne Corporation Page 23 $0.24 $0.31 $0.44 $0.46 $0.56 $0.00 $0.25 $0.50 $0.75 1Q'12 1Q'13 1Q'14 1Q'15 1Q'16 Adjusted EPS 1Q 2016 Financial Highlights  Performance Products & Solutions operating margin grew 540 basis points year-over-year to 11.9%  Distribution operating margin expanded 60 basis points to a record first quarter level of 6.5%  First quarter adjusted EPS has grown on average 24% per year since 2012 $11 $20 $0 $5 $10 $15 $20 $25 1Q'15 1Q'16 PP&S Operating Profit $16 $18 $10 $12 $14 $16 $18 $20 1Q'15 1Q'16 POD Operating Profit Note: $ in millions, except per share data PolyOne Corporation Page 24 1.7% 4.6% 5.1% 5.5% 7.2% 8.1% 9.7% 12.2% 16.7% 17.0% 20%+ 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 1Q'16 2020 Operating Income % of Sales At a Glance Color, Additives and Inks 2015 Revenues: $0.8 Billion Solutions Expanding Profits2015 Revenue by Industry Segment 14.7% Platinum Vision United States 48% Europe 33% Canada 2% Asia 12% Latin America 5% Appliances 2% Building & Construction 11% Consumer 8% Electrical & Electronics 1% Healthcare 6% Industrial 13% Packaging 31% Textiles 8% Transportation 9% Wire & Cable 11% PolyOne Corporation Page 25 1.1% 1.3% 3.4% 5.1% 9.6% 8.0% 8.6% 9.3% 14.7% 16.6% 20%+ 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 1Q'16 2020 Operating Income % of Sales At a Glance Specialty Engineered Materials 2015 Revenues: $0.5 Billion Solutions 2015 Revenue by Industry Segment Expanding Profits Platinum Vision 12.1% United States 49% Europe 29% Canada 2% Asia 20% Appliances 3% Building & Construction 3% Consumer 20% Electrical & Electronics 16% Healthcare 11% Industrial 8% Packaging 5% Transportation 19% Wire & Cable 15% PolyOne Corporation Page 26 1.4% 5.6% 7.3% 3.0% 8-10% 0.4% 2012 2013 2014 2015 1Q'16 2020 Operating Income % of Sales At a Glance Designed Structures and Solutions Solutions2015 Revenues: $0.5 Billion Expanding Profits2015 Revenue by Industry Segment Platinum Vision Appliances, 3% Building & Construction 9% Consumer 5% Healthcare 7% Industrial 24% Packaging 19% Transportation 33% United States 97% Canada 3% PolyOne Corporation Page 27 Appliances 7% Building & Construction 31% Consumer 5% Electrical & Electronics 3% Healthcare 1% Industrial 13% Packaging 5% Transportation 19% Wire & Cable 16% 5.5% 6.9% 3.8% 3.6% 5.5% 4.3% 6.3% 7.2% 8.3% 12-14% 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 1Q'16 2020 Operating Income % of Sales At a Glance Performance Products and Solutions Solutions Expanding Profits 2015 Revenues: $0.7 Billion 11.9% Platinum Vision 2015 Revenue by Industry Segment 7.7% United States 79% Canada 14% Asia 2% Latin America 5% PolyOne Corporation Page 28 2.6% 3.0% 3.5% 4.0% 4.6% 5.6% 6.4% 5.9% 6.6% 6.5-7.5% 6.5% 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 1Q'16 2020 Operating Income % of Sales 15% 54% 2006 1Q 2016 At a Glance Distribution Key Suppliers2015 Revenues: $1.0 Billion ROIC Expanding Profits 6.1% Platinum Vision Appliances 6% Building & Construction 4%Consumer 13% Electrical & Electronics 6% Healthcare 23% Industrial 16% Packaging 4% Transportation 24% Wire & Cable 4% http://www.polyone.com/Pages/VariationRoot.aspx http://www.polyone.com/Pages/VariationRoot.aspx PolyOne Corporation Page 29 2 lbs Plastic = 3 lbs aluminum or 8 lbs steel or 27 lbs glass 33% less material by weight than aluminum 75% less material by weight than steel 93% less material by weight than glass Requires 91% less energy to recycle a pound of plastic versus a pound of paper Source: SPI: Sustainability and the Plastics Industry Plastics: Key to Future Sustainable Development PolyOne Corporation Page 30 Application Examples PolyOne Corporation Page 31 Outdoor Applications • Leading provider of high performance specialty materials for the recreational and sports & leisure industry • Well positioned across all segments to address market needs  Metal to Polymer Conversion  Lightweighting  Thermal Management  Impact Performance Source: Outdoor Industry Association PolyOne Corporation Page 32  $1.5 billion attractive, growing market  Additives improve performance and reduce cost through light-weighting, reduced waste, faster cycle times, and extended shelf life of finished product  Aligned with megatrend of protecting the environment:  Sustainability benefits include lower package weight and improved recyclability of package at end of use Market Opportunity Leading Global Supplier of Additives In Growing PET Market Shelf-life extension Greater product consistency Recyclability and reduced carbon footprint Color and Special Effects Weight reduction Enhanced product aesthetics High heat resistance PET Bottling Technology 0.0 10.0 20.0 30.0 40.0 50.0 60.0 70.0 2009 2014 2019 Asia Pacific North America Latin America Western Europe Eastern Europe Middle East and Africa Global PET Packaging Growth 2009-2019 Source: Euromonitor retail off-trade consumption (PET bottles & jars, home care, personal care, food & non-alcoholic beverages) B ill io n un its 5% CAGR PolyOne Corporation Page 33 • Includes formulation and consultative services to assist manufacturers and brand owners in positively identifying their finished goods • Protects brand equity & consumer welfare • Reduces exposure to unwarranted recall expenses • Secures supply chain integrity – support for safe expansion into new geographies Authentication Technology PolyOne Corporation Page 34 Metal Replacement Solutions • Replaces metal in LED lighting • Extends LED durability and life span eliminating hot spots • Greater design flexibility with fewer parts • Weight reduction • Simplifies manufacturing and lowers total production cost PolyOne Corporation Page 35 • Color harmonization across 15 unique color-and-polymer combinations • Eliminated need for multiple pre- colored materials • Reduced Land Rover’s working capital Range Rover Evoque Interior PolyOne Corporation Page 36 • Reduced health and environmental impact • System cost reduction • Radiation-shielding performance • Parts consolidation • Design freedom CT Scanner PolyOne Corporation Page 37 High-Barrier Packaging Containers • Capability to extrude up to 13 layers • Strong oxygen and moisture vapor transmission protection • Can be made symmetrical or asymmetrical to meet customized needs of broad variety of applications • Barrier protection and superior sensory properties PolyOne Corporation Page 38 Aerospace Applications • Leading provider of specialty materials for the aerospace industry • Typical applications  Mil-spec aircraft windows, canopies, windscreens, instrument panels, wingtip lenses  Interior – gallery furnishings, tray tables, arm rests, trim strips, joint/edge coverings • Benefits:  High impact strength  Resistant to UV rays  Flame and smoke compliance  Easy to clean with aggressive cleaners; anti-microbial grades available  Range of sizes, thicknesses, colors, etc. 1 Reconciliation of Non-GAAP Financial Measures (Unaudited) (Dollars in millions, except per share data) Below is a reconciliation of non-GAAP financial measures to the most directly comparable measures calculated and presented in accordance with U.S. Special items include charges related to specific strategic initiatives or financial restructuring such as: consolidation of operations; debt extinguishment costs; costs incurred directly in relation to acquisitions or divestitures; employee separation costs resulting from personnel reduction programs, plant phase-in costs, executive separation agreements; asset impairments; mark-to-market adjustments associated with actuarial gains and losses on pension and other post-retirement benefit plans; environmental remediation costs, fines, penalties and related insurance recoveries related to facilities no longer owned or closed in prior years; gains and losses on the divestiture of operating businesses, joint ventures and equity investments; gains and losses on facility or property sales or disposals; results of litigation, fines or penalties, where such litigation (or action relating to the fines or penalties) arose prior to the commencement of the performance period; one-time, non-recurring items; the effect of changes in accounting principles or other such laws or provisions affecting reported results; and tax adjustments.

Seller shall have the right to terminate an order confirmation with immediate effect if at any time prior to delivery, a person or group of persons who are unrelated to the persons controlling Buyer as of the date of the order confirmation, acquires control, through ownership of voting securities or otherwise, over Buyer. In the event of invalidity of a provision of these Terms, the parties shall deem that provision stricken in its entirety (i.e. pro non scripto) and the balance of these Terms shall remain in full force and effect or affecting the validity or enforceability of such provision in any other jurisdiction. 24. The expiration or termination of this Term shall not affect such of the provisions of these Terms which are expressly provided to operate after any such expiration or termination, or which of necessity must continue to have effect after such expiration or termination, notwithstanding that the relevant provisions themselves do not provide for this. 27.

 Factors that could cause actual results to differ materially from those implied by these forward-looking statements include, but are not limited to:  The final amount of charges resulting from the planned North American asset realignment and the Company’s ability to realize anticipated savings and operational benefits from the asset realignment;  Our ability to achieve the strategic and other objectives relating to the acquisition of Spartech Corporation, including any expected synergies;  Our ability to successfully integrate Spartech and achieve the expected results of the acquisition, including, without limitation, the acquisition being accretive;  Disruptions, uncertainty or volatility in the credit markets that could adversely impact the availability of credit already arranged and the availability and cost of credit in the future;  The financial condition of our customers, including the ability of customers (especially those that may be highly leveraged and those with inadequate liquidity) to maintain their credit availability;  The speed and extent of an economic recovery, including the recovery of the housing market;  Our ability to achieve new business gains;  The effect on foreign operations of currency fluctuations, tariffs, and other political, economic and regulatory risks;  Changes in polymer consumption growth rates in the markets where we conduct business;  Changes in global industry capacity or in the rate at which anticipated changes in industry capacity come online;  Fluctuations in raw material prices, quality and supply and in energy prices and supply;  Production outages or material costs associated with scheduled or unscheduled maintenance programs;  Unanticipated developments that could occur with respect to contingencies such as litigation and environmental matters;  An inability to achieve or delays in achieving or achievement of less than the anticipated financial benefit from initiatives related to working capital reductions, cost reductions, employee productivity goals, and an inability to raise or sustain prices for products or services;  An inability to raise or sustain prices for products or services;  An inability to maintain appropriate relations with unions and employees;  The inability to achieve expected results from our acquisition activities;  Our ability to continue to pay cash dividends;  The amount and timing of repurchases of our common shares, if any; and  Other factors affecting our business beyond our control, including, without limitation, changes in the general economy, changes in interest rates and changes in the rate of inflation.  The above list of factors is not exhaustive.  We undertake no obligation to publicly update forward-looking statements, whether as a result of new information, future events or otherwise.  Addressable market exceeds $40 billion  Strong performance demonstrates that our strategy and execution are working  Megatrends and emerging opportunities align with our strengths  Innovation and services provide differentiation, incremental pricing power, and competitive advantage  Strong and proven management team driving growth and performance PolyOne Corporation Page 18 Appendix PolyOne Corporation Page 19 $0.19 $0.26 $0.30 $0.37 $0.51 $0.57 $0.00 $0.25 $0.50 Q2'10 Q2'11 Q2'12 Q2'13 Q2'14 Q2'15 Adjusted EPS Q2 2015 Financial Highlights  Global Color Additives & Inks operating margin reaches record level of 18.2%  Global Specialty Engineered Materials operating margin grew 240 basis points year-over-year to 14.4%  Second quarter adjusted EPS has grown on average 25% per year since 2010 $13 $14 $24 $31 $38 $40 $10 $30 $50 Q2'10 Q2'11 Q2'12 Q2'13 Q2'14 Q2'15 GCAI Operating Profit $12 $13 $13 $15 $19 $20 $10 $14 $18 $22 Q2'10 Q2'11 Q2'12 Q2'13 Q2'14 Q2'15 GSEM Operating Profit Note: $ in millions, except per share data PolyOne Corporation Page 20 Appliances 2% Building & Construction 12% Consumer 7% Electrical & Electronics 1% Healthcare 6% Industrial 14% Packaging 31% Textiles 7% Transportation 8% Wire & Cable 12% 1.7% 4.6% 5.1% 5.5% 7.2% 8.1% 9.7% 12.2% 17.2% 20%+ 2006 2007 2008 2009 2010 2011 2012 2013 2014 YTD 2015 2020 Operating Income % of Sales At a Glance Global Color, Additives and Inks 2014 Revenues: $0.9 Billion Solutions Expanding Profits 2014 Revenue by Industry Segment 14.7% Platinum Vision United States 44% Europe 36% Canada 2% Asia 12% Latin America 6% PolyOne Corporation Page 21 Appliances 4% Building & Construction 3% Consumer 18% Electrical & Electronics 16% Healthcare 12% Industrial 8% Packaging 5% Transportation 20% Wire & Cable 12% At a Glance Global Specialty Engineered Materials 2014 Revenues: $0.6 Billion Solutions 2014 Revenue by Industry Segment Expanding Profits 1.1% 1.3% 3.4% 5.1% 9.6% 8.0% 8.6% 9.3% 15.3% 20%+ 2006 2007 2008 2009 2010 2011 2012 2013 2014 YTD 2015 2020 Operating Income % of Sales Platinum Vision 12.1% United States 44% Europe 33% Canada 2% Asia 19% Latin America 2% PolyOne Corporation Page 22 Appliances 2% Building & Construction 8% Consumer 5% Healthcare 6% Industrial 23% Packaging 27% Transportation 30% United States 96% Canada 4% At a Glance Designed Structures and Solutions Solutions 2014 Revenues: $0.6 Billion Expanding Profits 2014 Revenue by Industry Segment 1.4% 5.6% 7.3% 3.3% 12-14% 2012 2013 2014 YTD 2015 2020 Operating Income % of Sales Platinum Vision PolyOne Corporation Page 23 Appliances 8% Building & Construction 33% Consumer 5% Electrical & Electronics 3% Healthcare 1% Industrial 11% Packaging 5% Transportation 18% Wire & Cable 16% 5.5% 6.9% 3.8% 3.6% 5.5% 4.3% 6.3% 7.2% 7.6% 2006 2007 2008 2009 2010 2011 2012 2013 2014 YTD 2015 2020 Operating Income % of Sales At a Glance Performance Products and Solutions Solutions Expanding Profits 2014 Revenues: $0.8 Billion 10-12% Platinum Vision 2014 Revenue by Industry Segment 7.7% United States 80% Canada 14% Asia 2% Latin America 4% PolyOne Corporation Page 24 Appliances 6% Building & Construction 5% Consumer 13% Electrical & Electronics 6% Healthcare 23% Industrial 15% Packaging 4% Transportation 25% Wire & Cable 3% 2.6% 3.0% 3.5% 4.0% 4.6% 5.6% 6.4% 5.9% 6.5% 6.5-7.5% 2006 2007 2008 2009 2010 2011 2012 2013 2014 YTD 2015 2020 Operating Income % of Sales 15% 52% 2006 Q2 2015 At a Glance Distribution Key Suppliers 2014 Revenues: $1.1 Billion ROIC Expanding Profits 6.1% Platinum Vision http://www.polyone.com/Pages/VariationRoot.aspx PolyOne Corporation Page 25 2 lbs Plastic = 3 lbs aluminum or 8 lbs steel or 27 lbs glass 33% less material by weight than aluminum 75% less material by weight than steel 93% less material by weight than glass Requires 91% less energy to recycle a pound of plastic versus a pound of paper Source: SPI: Sustainability and the Plastics Industry Plastics: Key to Future Sustainable Development PolyOne Corporation Page 26 Commitment to Operational Excellence 81% 93% 2006 2014 16.2% 9.9% 2006 2014 On-Time Delivery Working Capital % of Sales 5% 43% 2006 2014 Percent of Associates Trained in LSS  Five consecutive years – CFO Magazine Best Working Capital Management in the chemical industry World’s Best Business Process Excellence Program in 2012*  114 trained Black Belts  222 trained Green Belts  140 trained Kaizen Leaders World’s Best Start-up Program for Lean Six Sigma Deployment in 2009* *Both awards received from International Quality and Productivity Center PolyOne Corporation Page 27 Application Examples PolyOne Corporation Page 28  $1.5 billion attractive, growing market  Additives improve performance and reduce cost through light-weighting, reduced waste, faster cycle times, and extended shelf life of finished product  Aligned with megatrend of protecting the environment:  Sustainability benefits include lower package weight and improved recyclability of package at end of use Market Opportunity Leading Global Supplier of Additives In Growing PET Market Shelf-life extension Greater product consistency Recyclability and reduced carbon footprint Color and Special Effects Weight reduction Enhanced product aesthetics High heat resistance PET Bottling Technology 0.0 10.0 20.0 30.0 40.0 50.0 60.0 70.0 2009 2014 2019 Asia Pacific North America Latin America Western Europe Eastern Europe Middle East and Africa Global PET Packaging Growth 2009-2019 Source: Euromonitor retail off-trade consumption (PET bottles & jars, home care, personal care, food & non-alcoholic beverages) B ill io n un its 5% CAGR PolyOne Corporation Page 29 • Includes formulation and consultative services to assist manufacturers and brand owners in positively identifying their finished goods • Protects brand equity & consumer welfare • Reduces exposure to unwarranted recall expenses • Secures supply chain integrity – support for safe expansion into new geographies Authentication Technology PolyOne Corporation Page 30 • Color harmonization across 15 unique color-and-polymer combinations • Eliminated need for multiple pre- colored materials • Reduced Land Rover’s working capital 2015 Range Rover Evoque Interior PolyOne Corporation Page 31 • Reduced health and environmental impact • System cost reduction • Radiation-shielding performance • Parts consolidation • Design freedom CT Scanner PolyOne Corporation Page 32 Metal Replacement Solutions • Replaces metal in LED lighting • Extends LED durability and life span eliminating hot spots • Greater design flexibility with fewer parts • Weight reduction • Simplifies manufacturing and lowers total production cost PolyOne Corporation Page 33 Next Generation Solar Charger • Ginkgo Solar Tree charger utilizing our unique reSound™ material • reSound™ is a durable material consisting of 50% bio-derived plastic and 50% traditional petroleum-based plastic • Use of reSound™ reduced the carbon footprint for this product by 35% • reSound™ Is classified as a PolyOne Sustainable SolutionSM PolyOne Sustainable SolutionSM PolyOne Corporation Page 34 High-Barrier Packaging Containers • Capability to extrude up to 13 layers • Strong oxygen and moisture vapor transmission protection • Can be made symmetrical or asymmetrical to meet customized needs of broad variety of applications • Barrier protection and superior sensory properties PolyOne Corporation Page 35 Aerospace Applications • Leading provider of specialty materials for the aerospace industry • Typical applications  Mil-spec aircraft windows, canopies, windscreens, instrument panels, wingtip lenses  Interior – gallery furnishings, tray tables, arm rests, trim strips, joint/edge coverings • Benefits:  High impact strength  Resistant to UV rays  Flame and smoke compliance  Easy to clean with aggressive cleaners; anti-microbial grades available  Range of sizes, thicknesses, colors, etc. 1 Schedule I Reconciliation of Non-GAAP Financial Measures (Unaudited) (Dollars in millions, except per share data) Below is a reconciliation of non-GAAP financial measures to the most directly comparable measures calculated and presented in accordance with U.S. Special items include charges related to specific strategic initiatives or financial restructuring such as: consolidation of operations; debt extinguishment costs; employee separation costs resulting from personnel reduction programs, plant phase-in costs, executive separation agreements; asset impairments; mark-to-market adjustments associated with actuarial gains and losses on pension and other post-retirement benefit plans; environmental remediation costs, fines, penalties, remediation costs and related insurance recoveries related to facilities no longer owned or closed in prior years; gains and losses on the divestiture of operating businesses, joint ventures and equity investments; gains and losses on facility or property sales or disposals; results of litigation, fines or penalties, where such litigation (or action relating to the fines or penalties) arose prior to the commencement of the performance period; unrealized gains and losses from foreign currency option contracts; one-time, non-recurring items; and the effect of changes in accounting principles or other such laws or provisions affecting reported results. (2) Tax adjustments include the net tax expense (benefit) from one-time income tax items and deferred income tax valuations allowance adjustments. 3 Net debt to adjusted EBITDA is calculated as follows: Six Months Ended Twelve Months Ended Six Months Ended Trailing Twelve Months (TTM) Ended (In millions) March 31, 2014 December 31, 2014 March 31, 2015 March 31, 2015 Short-term portion and current portion of long-term debt $ 12.7 $ 61.8 $ 61.8 Long-term debt 967.9 962.0 996.4 Less: Cash and cash equivalents (261.5) (238.6) (236.8) Net Debt $ 719.1 785.2 821.4 Income before income taxes $ 73.2 $ 88.4 $ 116.7 $ 131.9 Interest expense, net 31.2 62.2 32.3 63.3 Depreciation and amortization 72.2 123.9 50.1 101.8 Special items, impact on operating income 62.2 164.9 21.2 123.9 Accelerated depreciation included in special items (20.5) (23.1) (0.3) (2.9) Adjusted EBITDA $ 218.3 $ 416.3 $ 220.0 $ 418.0 Net Debt/TTM Adjusted EBITDA 2.0 POL IR Presentation - Jefferies Industrials Conference 2015 website ��PolyOne Investor Presentation�Jefferies 2015 Industrials Conference�August 2015�� Forward-Looking Statements Use of Non-GAAP Measures PolyOne Commodity to Specialty Transformation PolyOne�At A Glance Mix Shift Highlights Specialty Transformation Confirmation of Our Strategy Strategy and Execution Drive Results Proof of Performance & 2020 Goals Platinum Vision: Pathway to Accelerated Growth Innovation Drives Earnings Growth Megatrends Aligned with Key End Markets A Rich Pipeline of Opportunity Debt Maturities & Pension Funding Free Cash Flow and Strong Balance Sheet �Fund Investment / Shareholder Return PolyOne Core Values Why Invest In PolyOne?

 Factors that could cause actual results to differ materially from those implied by these forward-looking statements include, but are not limited to:  The final amount of charges resulting from the planned North American asset realignment and the Company’s ability to realize anticipated savings and operational benefits from the asset realignment;  Our ability to achieve the strategic and other objectives relating to the acquisition of Spartech Corporation, including any expected synergies;  Our ability to successfully integrate Spartech and achieve the expected results of the acquisition, including, without limitation, the acquisition being accretive;  Disruptions, uncertainty or volatility in the credit markets that could adversely impact the availability of credit already arranged and the availability and cost of credit in the future;  The financial condition of our customers, including the ability of customers (especially those that may be highly leveraged and those with inadequate liquidity) to maintain their credit availability;  The speed and extent of an economic recovery, including the recovery of the housing market;  Our ability to achieve new business gains;  The effect on foreign operations of currency fluctuations, tariffs, and other political, economic and regulatory risks;  Changes in polymer consumption growth rates in the markets where we conduct business;  Changes in global industry capacity or in the rate at which anticipated changes in industry capacity come online;  Fluctuations in raw material prices, quality and supply and in energy prices and supply;  Production outages or material costs associated with scheduled or unscheduled maintenance programs;  Unanticipated developments that could occur with respect to contingencies such as litigation and environmental matters;  An inability to achieve or delays in achieving or achievement of less than the anticipated financial benefit from initiatives related to working capital reductions, cost reductions, employee productivity goals, and an inability to raise or sustain prices for products or services;  An inability to raise or sustain prices for products or services;  An inability to maintain appropriate relations with unions and employees;  The inability to achieve expected results from our acquisition activities;  Our ability to continue to pay cash dividends;  The amount and timing of repurchases of our common shares, if any; and  Other factors affecting our business beyond our control, including, without limitation, changes in the general economy, changes in interest rates and changes in the rate of inflation.  The above list of factors is not exhaustive.  We undertake no obligation to publicly update forward-looking statements, whether as a result of new information, future events or otherwise.  Addressable market exceeds $40 billion  Strong performance demonstrates that our strategy and execution are working  Megatrends and emerging opportunities align with our strengths  Innovation and services provide differentiation, incremental pricing power, and competitive advantage  Strong and proven management team driving growth and performance PolyOne Corporation Page 16 Appendix PolyOne Corporation Page 17 $0.20 $0.28 $0.36 $0.49 $0.54 $0.00 $0.15 $0.30 $0.45 $0.60 Q3'11 Q3'12 Q3'13 Q3'14 Q3'15 Adjusted EPS Q3 2015 Financial Highlights  Color Additives & Inks operating margin reaches record third quarter level of 17.3%  Specialty Engineered Materials operating margin grew 210 basis points year-over-year to 14.7%  Third quarter adjusted EPS has grown on average 28% per year since 2011 $13 $19 $29 $30 $35 $0 $10 $20 $30 $40 Q3'11 Q3'12 Q3'13 Q3'14 Q3'15 GCAI Operating Profit $11 $13 $15 $18 $20 $10 $14 $18 $22 Q3'11 Q3'12 Q3'13 Q3'14 Q3'15 GSEM Operating Profit Note: $ in millions, except per share data PolyOne Corporation Page 18 Appliances 2% Building & Construction 12% Consumer 7% Electrical & Electronics 1% Healthcare 6% Industrial 14% Packaging 31% Textiles 7% Transportation 8% Wire & Cable 12% 1.7% 4.6% 5.1% 5.5% 7.2% 8.1% 9.7% 12.2% 17.2% 20%+ 2006 2007 2008 2009 2010 2011 2012 2013 2014 YTD 2015 2020 Operating Income % of Sales At a Glance Global Color, Additives and Inks 2014 Revenues: $0.9 Billion Solutions Expanding Profits 2014 Revenue by Industry Segment 14.7% Platinum Vision United States 44% Europe 36% Canada 2% Asia 12% Latin America 6% PolyOne Corporation Page 19 Appliances 4% Building & Construction 3% Consumer 18% Electrical & Electronics 16% Healthcare 12% Industrial 8% Packaging 5% Transportation 20% Wire & Cable 12% At a Glance Global Specialty Engineered Materials 2014 Revenues: $0.6 Billion Solutions 2014 Revenue by Industry Segment Expanding Profits 1.1% 1.3% 3.4% 5.1% 9.6% 8.0% 8.6% 9.3% 15.1% 20%+ 2006 2007 2008 2009 2010 2011 2012 2013 2014 YTD 2015 2020 Operating Income % of Sales Platinum Vision 12.1% United States 44% Europe 33% Canada 2% Asia 19% Latin America 2% PolyOne Corporation Page 20 Appliances 2% Building & Construction 8% Consumer 5% Healthcare 6% Industrial 23% Packaging 27% Transportation 30% United States 96% Canada 4% At a Glance Designed Structures and Solutions Solutions 2014 Revenues: $0.6 Billion Expanding Profits 2014 Revenue by Industry Segment 1.4% 5.6% 7.3% 3.5% 12-14% 2012 2013 2014 YTD 2015 2020 Operating Income % of Sales Platinum Vision PolyOne Corporation Page 21 Appliances 8% Building & Construction 33% Consumer 5% Electrical & Electronics 3% Healthcare 1% Industrial 11% Packaging 5% Transportation 18% Wire & Cable 16% 5.5% 6.9% 3.8% 3.6% 5.5% 4.3% 6.3% 7.2% 8.1% 2006 2007 2008 2009 2010 2011 2012 2013 2014 YTD 2015 2020 Operating Income % of Sales At a Glance Performance Products and Solutions Solutions Expanding Profits 2014 Revenues: $0.8 Billion 10-12% Platinum Vision 2014 Revenue by Industry Segment 7.7% United States 80% Canada 14% Asia 2% Latin America 4% PolyOne Corporation Page 22 Appliances 6% Building & Construction 5% Consumer 13% Electrical & Electronics 6% Healthcare 23% Industrial 15% Packaging 4% Transportation 25% Wire & Cable 3% 2.6% 3.0% 3.5% 4.0% 4.6% 5.6% 6.4% 5.9% 6.6% 6.5-7.5% 2006 2007 2008 2009 2010 2011 2012 2013 2014 YTD 2015 2020 Operating Income % of Sales 15% 52% 2006 Q3 2015 At a Glance Distribution Key Suppliers 2014 Revenues: $1.1 Billion ROIC Expanding Profits 6.1% Platinum Vision http://www.polyone.com/Pages/VariationRoot.aspx PolyOne Corporation Page 23 2 lbs Plastic = 3 lbs aluminum or 8 lbs steel or 27 lbs glass 33% less material by weight than aluminum 75% less material by weight than steel 93% less material by weight than glass Requires 91% less energy to recycle a pound of plastic versus a pound of paper Source: SPI: Sustainability and the Plastics Industry Plastics: Key to Future Sustainable Development PolyOne Corporation Page 24 Commitment to Operational Excellence 81% 93% 2006 2014 16.2% 9.9% 2006 2014 On-Time Delivery Working Capital % of Sales 5% 43% 2006 2014 Percent of Associates Trained in LSS  Five consecutive years – CFO Magazine Best Working Capital Management in the chemical industry World’s Best Business Process Excellence Program in 2012*  113 trained Black Belts  235 trained Green Belts  151 trained Kaizen Leaders World’s Best Start-up Program for Lean Six Sigma Deployment in 2009* *Both awards received from International Quality and Productivity Center PolyOne Corporation Page 25 Application Examples PolyOne Corporation Page 26 Outdoor Applications • Leading provider of high performance specialty materials for the recreational and sports & leisure industry • Well positioned across all segments to address market needs  Metal to Polymer Conversion  Lightweighting  Thermal Management  Impact Performance Source: Outdoor Industry Association PolyOne Corporation Page 27  $1.5 billion attractive, growing market  Additives improve performance and reduce cost through light-weighting, reduced waste, faster cycle times, and extended shelf life of finished product  Aligned with megatrend of protecting the environment:  Sustainability benefits include lower package weight and improved recyclability of package at end of use Market Opportunity Leading Global Supplier of Additives In Growing PET Market Shelf-life extension Greater product consistency Recyclability and reduced carbon footprint Color and Special Effects Weight reduction Enhanced product aesthetics High heat resistance PET Bottling Technology 0.0 10.0 20.0 30.0 40.0 50.0 60.0 70.0 2009 2014 2019 Asia Pacific North America Latin America Western Europe Eastern Europe Middle East and Africa Global PET Packaging Growth 2009-2019 Source: Euromonitor retail off-trade consumption (PET bottles & jars, home care, personal care, food & non-alcoholic beverages) B ill io n un its 5% CAGR PolyOne Corporation Page 28 • Includes formulation and consultative services to assist manufacturers and brand owners in positively identifying their finished goods • Protects brand equity & consumer welfare • Reduces exposure to unwarranted recall expenses • Secures supply chain integrity – support for safe expansion into new geographies Authentication Technology PolyOne Corporation Page 29 • Color harmonization across 15 unique color-and-polymer combinations • Eliminated need for multiple pre- colored materials • Reduced Land Rover’s working capital 2015 Range Rover Evoque Interior PolyOne Corporation Page 30 • Reduced health and environmental impact • System cost reduction • Radiation-shielding performance • Parts consolidation • Design freedom CT Scanner PolyOne Corporation Page 31 Metal Replacement Solutions • Replaces metal in LED lighting • Extends LED durability and life span eliminating hot spots • Greater design flexibility with fewer parts • Weight reduction • Simplifies manufacturing and lowers total production cost PolyOne Corporation Page 32 High-Barrier Packaging Containers • Capability to extrude up to 13 layers • Strong oxygen and moisture vapor transmission protection • Can be made symmetrical or asymmetrical to meet customized needs of broad variety of applications • Barrier protection and superior sensory properties PolyOne Corporation Page 33 Aerospace Applications • Leading provider of specialty materials for the aerospace industry • Typical applications  Mil-spec aircraft windows, canopies, windscreens, instrument panels, wingtip lenses  Interior – gallery furnishings, tray tables, arm rests, trim strips, joint/edge coverings • Benefits:  High impact strength  Resistant to UV rays  Flame and smoke compliance  Easy to clean with aggressive cleaners; anti-microbial grades available  Range of sizes, thicknesses, colors, etc. 1 Reconciliation of Non-GAAP Financial Measures (Unaudited) (Dollars in millions, except per share data) Below is a reconciliation of non-GAAP financial measures to the most directly comparable measures calculated and presented in accordance with U.S. Special items include charges related to specific strategic initiatives or financial restructuring such as: consolidation of operations; debt extinguishment costs; employee separation costs resulting from personnel reduction programs, plant phase-in costs, executive separation agreements; asset impairments; mark-to-market adjustments associated with actuarial gains and losses on pension and other post-retirement benefit plans; environmental remediation costs, fines, penalties, remediation costs and related insurance recoveries related to facilities no longer owned or closed in prior years; gains and losses on the divestiture of operating businesses, joint ventures and equity investments; gains and losses on facility or property sales or disposals; results of litigation, fines or penalties, where such litigation (or action relating to the fines or penalties) arose prior to the commencement of the performance period; one-time, non-recurring items; and the effect of changes in accounting principles or other such laws or provisions affecting reported results. (2) Tax adjustments include the net tax expense/benefit from one-time income tax items, the set-up or reversal of uncertain tax position reserves and deferred income tax valuations allowance adjustments.