Three bars were treated with five different commercially available hospital disinfectants once every 24 hours for three days. Cidex® OPA is a trademark of ASP Global Manufacturing GMBH; CaviCide™ is a trademark of Metrex Research, LLC; and Virex® is a trademark of Diversey, Inc. $$$ $$ $ Improved Chemical Resistance PC+ABS PC PPSU PC+PET PC+PBT Trilliant ™ Material Compatibility with Various Disinfectants 8.5% Bleach 3% Peroxide Cidex® OPA CaviCide™ Virex™ Tb Trilliant™ PC+PBT PC+PET PPSU PC PC+ABS Trilliant™ PC+PBT PC+PET PPSU PC PC+ABS Trilliant™ PC+PBT PC+PET PPSU PC Trilliant™ PC+PBT PC+PET PPSU Trilliant™ $$$ $$ $ Improved Chemical Resistance PC+ABS PC PPSU PC+PET PC+PBT Trilliant ™ Material Compatibility with Various Disinfectants 8.5% Bleach 3% Peroxide Cidex® OPA CaviCide™ Virex™ Tb Trilliant™ PC+PBT PC+PET PPSU PC PC+ABS Trilliant™ PC+PBT PC+PET PPSU PC PC+ABS Trilliant™ PC+PBT PC+PET PPSU PC Trilliant™ PC+PBT PC+PET PPSU Trilliant™ www.avient.com Copyright © 2021, Avient Corporation.

LUBRIONE™ INTERNALLY LUBRICATED FORMULATIONS PRODUCT SELECTION GUIDE PRODUCT DESCRIPTION UNITS TEST METHOD NN–000/15T BLACK NN–20GF– 10GB/13T–2S BLACK NN–30GF/10T WHITE LB8900-0001 30GF/15T NATURAL LB8900-0002 30GF/13T-2S NATURAL LB8900-0003 18T-2S NATURAL ATT–000/5T BLACK AT–000/18T– 2S NATURAL 5209 FPL 20 NATURAL PS–30GF/2S NATURAL LB5210–0237 1B NATURAL PC–10CF/15T BLACK Base Polymer PA 66 PA 66 PA 66 PK PK PK POM POM POM PBT PP PC General Properties Specific Gravity g/cm3 ASTM D792 1.23 1.46 1.47 1.56 1.55 1.33 1.38 1.47 1.51 1.54 1.13 1.31 Molding Shrinkage ASTM D955 Flow % 1.0–2.0 0.20–0.50 0.50–1.0 0.30–0.60 0.20–0.40 1.7–2.3 1.5–2.0 2.0–3.0 2.0–3.0 0.20–0.40 0.10–0.30 0.10–0.30 Water Absoprtion (23°C, 24 hr.) % ASTM D570 0.8 – 0.050–1.0 0.3 0.4 0.4 0.050 – 0.050 – – – Mechanical Properties Tensile Modulus(1) MPa ASTM D638 2650 9650 9790 8050 7380 1250 965 1770 2420 8620 4140 – Tensile Strength(1) (Yield) MPa ASTM D638 61.4 119 122 119 94 47 35 40 45 108 72.4 90 Tensile Elongation(1) (Break) % ASTM D638 3.0–5.0 1.0–3.0 1.5 3 2 35 40 30 26 3 – – Flexural Modulus MPa ASTM D790 2760 6890 6890 7380 6410 1300 1080 1740 1790 6690 4840 5500 Flexural Strength MPa ASTM D790 108 172 214 182 167 55 41.4 62.7 68.3 165 110 130 Coefficient of Friction ASTM D1894 vs. Steel – Static 0.25 0.46 0.18 0.15 0.12 0.19 0.11 0.14 0.13 0.24 0.17 0.17 Impact Notched Izod Impact (23°C, 3.18 mm, Injection Molded) J/m ASTM D256A 41 64(6) 110 107 107 70 80 37 37 75 – 69 Thermal Properties Heat Deflection Temperature ASTM D648 0.45 MPa °C 215(6) – 250 215 216 184 152 151(6) 153(6) 218(6) – – 1.8 MPa °C 65(6) 239(7) 244(6) 210 210 75 94 81.1(6) 88 197(6) – 135(5) Electrical Properties Surface Resistivity ohms/sq ASTM D254 – – – 1.30x1012 1.9x1012 5.2x1012 – – – – – 1.0x109 Dielectric Strength (Short Time) kV/mm – – 8.5 – – – – – – – – – Flammability Flame Rating Class UL 94 HB – – HB HB HB – HB – – – – LubriOne™ Internally Lubricated Formulations NOTES (1) Type I, 5.1mm/min (2) Type I, 21.3 mm/min (3) Type I, 50 mm/min (4) Type I, 5.1mm/min, Break (5) 3.2 mm thick, Unannealed (6) 6.35 mm thick, Unannealed (7) 3.2 mm thick, Annealed PRODUCT DESCRIPTION UNITS TEST METHOD LB6000- 5024 RS HI Natural LB6000- 5021 RS S1 Black LB6000- 5021 RS X2 Black LB6000- 5019 X1 Black LB6700- 5001 RS AF Black NN- 000/01M Black SO REC LB6600- 5030 RS Grey LB3300- 5010 RS Natural LB3300- 5005 RS Natural REC LB3220- 5001 RS C Natural X1 LB8900- 5010 GP Grey LB8900- 5006 RS PE Natural LB8900- 5004 RS PE Natural LB4200- 5022 Black LB4200- 5023 Natural Base Polymer PA 6 PA6/PA66 PA66 PBT PC PKE POM Lubricant UHMWPE1 UHMWPE UHMWPE UHMWPE UHMWPE MoS22 Graphite UHMWPE UHMWPE UHMWPE Graphite UHMWPE UHMWPE MoS2 UHMWPE Filler type GF10 GF30 GF30 GF50 GF50 Unfilled GF33 GF20 MI20 GF10 Unfilled GF20 GF30 Unfilled Unfilled General Properties Specific Gravity g/cm3 ISO 1183 1.18 1.35 1.39 1.55 1.58 1.14 1.44 1.42 1.46 1.23 1.26 1.34 1.43 1.4 1.35 Mechanical Properties Tensile Modulus (23°C) MPa ISO 527-1 4250 9500 9000 15500 16600 3500 10600 6300 3330 4000 1630 5300 9250 2470 2150 Tensile Strength (Yield, 23°C) MPa ISO-527-2 97 150 160 205 200 85 164 102 55 60 60 108 99.1 55 50 Tensile Elongation (Break, 23°C) % ISO-527-2 12 2.5 3 2.7 2.4 3.4 2.0 4.2 8 2.5 46 3.7 1.5 11 11 Flexural Strength (23°C) MPa ISO 178 103 – – 285 265 108 215 127 78 85 38 155 117 73 68 Flexural Modulus (23°C) MPa ISO 178 3250 – – 12400 11100 2690 9000 4700 3000 3100 1380 4600 5450 2210 2070 Impact Charpy Notched Impact Strength (23°C, Injection Molded) kJ/m^2 ISO 179 14 12 10 15 10 3 6 7.7 4.3 12 15 10 7.6 8 5 Charpy Unnotched Impact Strength (23°C, Injection Molded) kJ/m^2 ISO 179 82 55 61 75 60 65 50 47 69 - NB 63 36 NB NB Thermal Properties Deflection Temperature Under Load 1.8 Mpa, Unannealed °C ISO 75-2/A 107 – – 204 – 73 235 – – – 90 210 204 86 80 Cofficient of Friction (CoF) & Wear Rate CoF vs.

Specialized chemistries enable TPEs to adhere to many different plastic substrates, including polypropylene (PP), polycarbonate (PC), acrylonitrile-butadiene-styrene (ABS), PC/ABS, copolyester, polyamide, and polystyrene, for a seamless and permanent bond. TPEs can provide unusual texturing, such as a bubble or ridged surface or a leather-like feel for phone and tablet cases, as well as combinations of different textures that accentuate electronic functionality.

When overmolded, GLS TPEs bond permanently and virtually seamlessly to many different plastic substrates, including polypropylene (PP), polycarbonate (PC), acrylonitrile-butadiene-styrene (ABS), PC/ABS, copolyester, polyamide (nylon) and polystyrene (PS). A few grams of a TPE material can often make a major difference to improve the perceived quality or value of an item.

When overmolded, GLS TPEs bond permanently and virtually seamlessly to many different plastic substrates, including polypropylene (PP), polycarbonate (PC), acrylonitrile-butadiene-styrene (ABS), PC/ABS, copolyester, polyamide (nylon) and polystyrene (PS). A few grams of a TPE material can often make a major difference to improve the perceived quality or value of an item.

When overmolded, GLS TPEs bond permanently and virtually seamlessly to many different plastic substrates, including polypropylene (PP), polycarbonate (PC), acrylonitrile-butadiene-styrene (ABS), PC/ABS, copolyester, polyamide (nylon) and polystyrene (PS). A few grams of a TPE material can often make a major difference to improve the perceived quality or value of an item.

When overmolded, GLS TPEs bond permanently and virtually seamlessly to many different plastic substrates, including polypropylene (PP), polycarbonate (PC), acrylonitrile-butadiene-styrene (ABS), PC/ABS, copolyester, polyamide (nylon) and polystyrene (PS). A few grams of a TPE material can often make a major difference to improve the perceived quality or value of an item.

How do they differ from commodity or engineered resins? However, these high- heat materials require much higher mold and melt temperatures than typical plastics such as polypropylene (PP), nylon and polycarbonate (PC). Regarded as some of the highest performing thermoplastics in the industry, these light and versatile alternatives to metals and ceramics can accept the challenges posed by a broad range of applications and industries.

Specialized chemistries enable TPEs to adhere to many different plastic substrates, including polypropylene (PP), polycarbonate (PC), acrylonitrile-butadiene-styrene (ABS), PC/ABS, copolyester, polyamide, and polystyrene, for a seamless and permanent bond. TPEs can provide unusual texturing, such as a bubble or ridged surface or a leather-like feel for phone and tablet cases, as well as combinations of different textures that accentuate electronic functionality.

When overmolded, GLS TPEs bond permanently and virtually seamlessly to many different plastic substrates, including polypropylene (PP), polycarbonate (PC), acrylonitrile-butadiene-styrene (ABS), PC/ABS, copolyester, polyamide (nylon) and polystyrene (PS). A few grams of a TPE material can often make a major difference to improve the perceived quality or value of an item.