Paint replacement technologies, including Artisan™ ABS portfolio and Molded-In Color Metallic

Our GLS™ overmold TPEs have excellent adhesion to a wide variety of substrates, from polyolefins, such as polypropylene and polyethylene, to engineering resins, such as PC, ABS, acetal and nylon. As new TPE technologies emerge to adhere to engineering plastics like nylon and PC/ABS, PP-based color concentrates may not be the best choice for optimized adhesion characteristics. As new TPE technologies emerge to adhere to engineering plastics like nylon and PC/ABS, PP-based color concentrates may not be the best choice for optimized adhesion characteristics.

Yes, achieving this target will support Avient's achievement of Abs 3. Though this goal is most closely related to our products, this goal necessitates that any waste produced via the manufacturing process also be recycle, and so is indirectly tied to our Abs 3 waste goal. Avient CDP Climate Change Questionnaire 2022 Friday, July 29, 2022 139 Requesting member Husqvarna AB Scope of emissions Scope 1 Allocation level Company wide Allocation level detail Emissions in metric tonnes of CO2e 7.6 Uncertainty (±%) 10 Major sources of emissions Verified Yes Allocation method Allocation based on the volume of products purchased Market value or quantity of goods/services supplied to the requesting member 451,801 Unit for market value or quantity of goods/services supplied Pounds (lb) Please explain how you have identified the GHG source, including major limitations to this process and assumptions made The volume produced for Husqvarna AB divided by total production volume was used as a percentage.

Natural ABS formulation enables improved color consistency, operational efficiency.

Both ABS laminate sheet and fiber-reinforced composites produce a strong, stiff hull that won’t flex in rough water or when fastened down to a roof rack.

Artisan™ high-gloss, metallic effect ABS formulation provided paint replacement solution to meet electronic applications needs

GL AS S/ EP OX Y TA B M AT ER IA L N O T AB BOTTOM PANEL LEG LENGTH BREAK STRENGTH Hammerhead with 5 lb/ft3 (80 kg/m3) Core Density 2 in 51 mm 420 lbs 191 kg Hammerhead with 7 lb/ft3 (115 kg/m3) Core Density 2 in 51 mm 370 lbs 168 kg Hammerhead with 8 lb/ft3 (135 kg/m3) Core Density 2 in 51 mm 332 lbs 151 kg Marine Plywood 2 in 51 mm 984 lbs 446 kg Glass/Polyester with Balsa Core 2 in 51 mm 1298 lbs 589 kg Hammerhead with 5 lb/ft3 (80 kg/m3) Core Density - ITW Plexus MA420 Adhesive NA 501 lbs 227 kg Hammerhead with 7 lb/ft3 (115 kg/m3) Core Density - ITW Plexus MA420 Adhesive NA 839 lbs 381 kg Hammerhead with 8 lb/ft3 (135 kg/m3) Core Density - ITW Plexus MA420 Adhesive NA 1156 lbs 524 kg Hammerhead with 8 lb/ft3 (135 kg/m3) Core Density - Crestomer 1152PA Adhesive NA 1530 lbs 694 kg Hammerhead with 8 lb/in3 (135 kg/m3) Core Density - Crestomer M1-30 Adhesive NA 1471 lbs 667 kg Mixed Conditions ADHESIVE DESCRIPTION ADHESIVE GRADE MANUFACTURER AVERAGE BOND STRENGTH STANDARD DEVIATION FAILURE MODE BEST ADHESION 2k Urethane 75421 Lord 2281 psi 15.73 MPa 184 psi 1.27 MPa Substrate Cohesive 2k Acrylic SA1-705 GRY1 AccraLock 2211 psi 15.24 MPa 78 psi 0.54 MPa Substrate 2k Acrylic Plexus MA420 ITW 2171 psi 14.97 MPa 262 psi 1.81 MPa Substrate 2k Acrylic SA10-05 Blk1 AccraLock 2102 psi 14.49 MPa 138 psi 0.95 MPa Substrate 2k Urethane 75451 Lord 2047 psi 14.11 MPa 68 psi 0.47 MPa Cohesive 2k Acrylic SA1-705 GRY 1:2 AccraLock 1966 psi 13.56 MPa 68 psi 0.47 MPa Substrate 2k Acrylic Scotchweld 8010 3M 1907 psi 13.15 MPa 61 psi 0.42 MPa Adhesive Cyanoacrylate Gorilla Glue Gorilla Glue 1885 psi 13.00 MPa 432 psi 2.98 MPa Cohesive 2k Acrylic Crestabond PP-04 Scott Bader 1873 psi 12.91 MPa 281 psi 1.94 MPa Substrate 2k Acrylic SA10-05 Blk 10:2 AccraLock 1779 psi 12.27 MPa 127 psi 0.88 MPa Cohesive 2k Urethane 75422 Lord 1716 psi 11.83 MPa 190 psi 1.31 MPa Cohesive Adhesive 2k Urethane 75452 Lord 1535 psi 10.58 MPa 98 psi 0.68 MPa Adhesive 2k Methacrylate Polyfuse Icon Containment 1610 psi 11.10 MPa 98 psi 0.68 MPa Adhesive INTERMEDIATE ADHESION 2k Acrylic FA10-05 Blk C010817 AccraLock 724 psi 4.99 MPa 58 psi 0.40 MPa Cohesive 2k Acrylic FA10-05 Blk1 AccraLock 722 psi 4.98 MPa 44 psi 0.30 MPa Cohesive 2k Epoxy Loctite Epoxy Instant Mix Loctite 508 psi 3.50 MPa 81 psi 0.56 MPa Adhesive 2k Epoxy Gorilla Glue Epoxy Gorilla Glue 341 psi 2.35 MPa 198 psi 1.37 MPa Adhesive NOT RECOMMENDED 2k Epoxy Loctite Epoxy Marine Loctite 0 0 No bond ADHESIVE SELECTION Brands identified are owned by the manufacturers of the adhesive products. 1 surface sanded with 220 grit scuff prep 2 surface primed with 459T FASTENER TYPE BENEFITS CONSIDERATIONS Through-Bolting Best mechanical locking system Need back side access to panel Screw-In Anchor Highest pullout strength Requires pilot hole Cup Washer Spreads compressive load Requires relief hole; For substructure and hard point attachment Wide Grip (Bulb-Style) Rivet Ease of use—no installation torque limitations For lower load attachments Sheet Metal or Wood Screw Readily available, low cost Penetrate both skins for improved pullout Shoulder Washer Limits compressive load Requires relief hole; For substructure and hard point attachment For more information on installation, adhesives, and fasteners for specific applications, please contact Avient.

Wall Thickness (mm) C o o li n g T im e ( S e c ) 40 35 30 25 20 15 10 5 0 0 1 2 3 4 ABS PC Nylon 6/6 FIGURE 1 - Wall thickness vs. cooling time of various plastics FIGURE 2 - Designing for wall thickness changes FIGURE 3 - Internal and external radius guidelines FIGURE 4 - Coring for tight radius design ESCR Design Guide 2 CONTOUR Where possible, contouring the products’ exterior form, as shown in Figure 5, can help to eliminate pooling of fluids.

GL AS S/ EP OX Y TA B M AT ER IA L N O T AB BOTTOM PANEL LEG LENGTH BREAK STRENGTH Hammerhead with 5 lb/ft3 (80 kg/m3) Core Density 2 in 51 mm 420 lbs 191 kg Hammerhead with 7 lb/ft3 (115 kg/m3) Core Density 2 in 51 mm 370 lbs 168 kg Hammerhead with 8 lb/ft3 (135 kg/m3) Core Density 2 in 51 mm 332 lbs 151 kg Marine Plywood 2 in 51 mm 984 lbs 446 kg Glass/Polyester with Balsa Core 2 in 51 mm 1298 lbs 589 kg Hammerhead with 5 lb/ft3 (80 kg/m3) Core Density - ITW Plexus MA420 Adhesive NA 501 lbs 227 kg Hammerhead with 7 lb/ft3 (115 kg/m3) Core Density - ITW Plexus MA420 Adhesive NA 839 lbs 381 kg Hammerhead with 8 lb/ft3 (135 kg/m3) Core Density - ITW Plexus MA420 Adhesive NA 1156 lbs 524 kg Hammerhead with 8 lb/ft3 (135 kg/m3) Core Density - Crestomer 1152PA Adhesive NA 1530 lbs 694 kg Hammerhead with 8 lb/in3 (135 kg/m3) Core Density - Crestomer M1-30 Adhesive NA 1471 lbs 667 kg Mixed Conditions ADHESIVE DESCRIPTION ADHESIVE GRADE MANUFACTURER AVERAGE BOND STRENGTH STANDARD DEVIATION FAILURE MODE BEST ADHESION 2k Urethane 75421 LORD 2281 psi 15.73 MPa 184 psi 1.27 MPa Substrate Cohesive 2k Acrylic SA1-705 GRY1 ACRALOCK 2211 psi 15.24 MPa 78 psi 0.54 MPa Substrate 2k Acrylic Plexus MA420 ITW 2171 psi 14.97 MPa 262 psi 1.81 MPa Substrate 2k Acrylic SA10-05 Blk1 ACRALOCK 2102 psi 14.49 MPa 138 psi 0.95 MPa Substrate 2k Urethane 75451 LORD 2047 psi 14.11 MPa 68 psi 0.47 MPa Cohesive 2k Acrylic SA1-705 GRY 1:1 ACRALOCK 1966 psi 13.56 MPa 68 psi 0.47 MPa Substrate 2k Acrylic Scotch-Weld 8010 3M 1907 psi 13.15 MPa 61 psi 0.42 MPa Adhesive Cyanoacrylate Gorilla Glue Gorilla Glue 1885 psi 13.00 MPa 432 psi 2.98 MPa Cohesive 2k Acrylic Crestabond PP-04 Scott Bader 1873 psi 12.91 MPa 281 psi 1.94 MPa Substrate 2k Acrylic SA10-05 Blk 10:1 ACRALOCK 1779 psi 12.27 MPa 127 psi 0.88 MPa Cohesive 2k Urethane 75422 LORD 1716 psi 11.83 MPa 190 psi 1.31 MPa Cohesive Adhesive 2k Urethane 75452 LORD 1535 psi 10.58 MPa 98 psi 0.68 MPa Adhesive 2k Methacrylate PolyFuse Icon Containment 1610 psi 11.10 MPa 98 psi 0.68 MPa Adhesive INTERMEDIATE ADHESION 2k Acrylic FA10-05 Blk C010817 ACRALOCK 724 psi 4.99 MPa 58 psi 0.40 MPa Cohesive 2k Acrylic FA10-05 Blk1 ACRALOCK 722 psi 4.98 MPa 44 psi 0.30 MPa Cohesive 2k Epoxy Loctite Epoxy Instant Mix Loctite 508 psi 3.50 MPa 81 psi 0.56 MPa Adhesive 2k Epoxy Gorilla Epoxy Gorilla Glue 341 psi 2.35 MPa 198 psi 1.37 MPa Adhesive NOT RECOMMENDED 2k Epoxy Loctite Epoxy Marine Loctite 0 0 No bond ADHESIVE SELECTION Brand names of the adhesives are owned by the respective manufacturers.

Pre-tested color range for PE, PP, PEBA, PC and ABS to speed up time to market Colorants formulated for lab automation/identification coding, with low migration/interference properties ; available for PP, ABS, PC and more