Impact on cost of sales Impact on operating income Impact on income before income taxes

PDI) on extruded profiles 2 ASTM D-638 3 ASTM 256 4 ASTM D-648 66 psi, unannealed, 0.125" 5 Savings depends on profile size and production volume Acrylite is a registered trademark of Evonik Performance Materials Lens Performance Resilience™ LS Frost PVC Acrylite® Satinice Frost PMMA Light Transmission1 at 0.060" (1.5mm) 83% Low Diffusion 78% Medium Diffusion 75% High Diffusion 81% Low Diffusion Diffusion Half Power Angle (DLD) 26° Low Diffusion 41° Medium Diffusion 58° High Diffusion 26° Low Diffusion Tensile Strength2 Tensile Modulus2 Tensile Elongation (break)2 7,360 psi 400,000 psi 20% 7,330 psi 330,000 psi 43% Flammability (UL 94) V-0 @ 1.5mm 5VA @ 2.0mm HB @ 1.6mm Notched Izod Impact (73°F)3 2.3 ft-lb/in 0.6 ft-lb/in Heat Deflection Temperature4 157°F/69°C 182°F/83°C UV Stability Good Excellent Chemical Resistance Excellent Good Typical Lens Profile Cost 10–15% Savings5 Baseline 1.866.POLYONE www.polyone.com Copyright © 2018, PolyOne Corporation.

The hose manufacturer decided to explore other material options that would meet requirements such as excellent colorability, good surface appearance, high flow for optimal productivity, and of course, compliance with U.S. In addition to its excellent colorability and high flow, the Versalloy solution possessed a lower specific gravity and resulted in lower scrap rates compared to the competitive TPV, providing the opportunity to reduce system costs. THE IMPACT Avient’s expertise in materials for medical device applications helped this customer make a smooth transition to the GLS TPV.

THE SOLUTION In the development of the Caplex PRO-002, Humotech sought a material solution that would provide high torque, flexibility, and durability for key components of the foot. THE IMPACT The high energy storage characteristics of Gordon Composites thermoset springs provide Humotech’s prosthetic foot a natural flex, responding similarly to human calf muscles with the roll and rebound required for the patient to achieve a natural gait.

ECCOH™ Low Smoke & Fume Non-Halogen Formulation 5981 UV and chemically resistant thermoplastic for Teck 90 cable outer jackets ECCOH 5981 UV thermoplastic is a cost-effective material for jacketing, combining high environmental stress crack resistance (ESCR), UV performance, good shear strength, and flame-retardant properties for low-voltage, armored cables. With these high-performing mechanical properties, and the ability to customize for specific application requirements, the ECCOH 5981 formulation provides an LSFOH material that is especially suitable in cables used in confined spaces, such as mines, industrial plants, and transit systems. KEY CHARACTERISTICS • Smoke mitigation • Flame resistance • Passes -40° cold impact testing • Crush resistance • UV resistance • Suitable for CSA Teck 90 specification • Excellent tensile strength (2,910 psi) • Natural grades for easy colorability MARKETS & APPLICATIONS This LSFOH thermoplastic meets critical requirements for low-voltage, armored cable jackets.

Gravi-Tech™ Density-Modified Formulations High-Performance Alternative to Lead and Other Traditional Metals PRODUCT DESCRIPTION Gravi-Tech™ polymer-metal composites offer a high-performance thermoplastic-based alternative to lead and other traditional dense metals. KEY CHARACTERISTICS The primary features and benefits of Gravi-Tech formulations are: • Customized density, offering a wide range of specific gravities from 1.2 to 11 gm/cm3 • Broad modulus range, from very flexible to very rigid grades • Corrosion resistance, withstanding oxidation for long-term use and benefit • Chemical resistance, withstanding fuels, oils and other harsh chemicals • Metallization and electroplating, delivering the look and feel of metal Additional features include: • Design flexibility and processing ease • Good impact strength • Elevated heat deflection temperature PRODUCT BULLETIN TARGET MARKET AND APPLICATIONS Gravi-Tech composites are an excellent choice for applications in a full range of markets, including: Consumer Luxury packaging, golf clubs, fishing tackle, casino/gaming chips, exercise weights, hunting supplies, cutlery, appliances and hunting ammunition Healthcare X-ray shielding, nuclear medicine transport containers, and laboratory furniture and equipment Industrial Ammunition, reactor shielding, vibration and acoustical damping, military/tactical equipment, airport x-ray shielding, various food ware, building and construction equipment, inertial weighting, and underwater cable weighting Base Resin Specific Gravities Nylon 6 2.3, 2.7, 3.5, 4, 4.5, 5, 6 TPE 2.6, 3.9 TPU 2.6, 3, 4.5, 7.5, 9 PP 1.15–4 ABS 1.2–3 PPS 4 Nylon 12 4, 6.9, 11 TECHNICAL PROPERTIES Copyright © 2024, Avient Corporation.

To download a high-resolution image, please click here: FOR MEDIA USE ONLY] Surfaces protected include steel, wood, painted metal, and other substrates with high aesthetic requirements. This helps manufacturers reduce the risk of film residue and create a better customer experience within high-end markets.

AVIENT ADVANCED COMPOSITES OVERVIEW LOWER ENERGY COSTS Requires less energy during installation and use INCREASE COMPETITIVE ADVANTAGE Customizable solutions for specific application needs REDUCE PRODUCT LIFECYCLE COSTS Lower installation time, as well as warranty and �part replacement � expenses EXTEND PRODUCT LIFETIME Corrosion, flame, fatigue and UV resistant for improved durability DESIGN STRONG, LIGHTER WEIGHT COMPONENTS Up to 75% lighter than steel and up to 25% lighter than aluminum ADVANCED COMPOSITES An exceptional alternative to traditional materials such as wood, ceramic and metal, advanced composite solutions enable designers to: • Design lighter weight structural components for increased lifetime performance and improved fuel efficiency—higher strength-to-weight ratios to exceed the structural performance of traditional materials while significantly reducing weight—up to 75% lighter than steel and up to 25% lighter than aluminum • Extend product lifetime to reduce part replacement and decrease warranty expenses— the corrosion, weather, flame and fatigue resistance of composite solutions improve component durability • Reduce product lifecycle costs—the extended product lifetime, along with the potential for reduced installation time and cost due to the lighter weight of composite solutions, significantly reduces the associated cost over the lifetime of a part • Lower energy costs—by leveraging a higher strength-to-weight ratio, composite solutions allow designers to engineer products that require less energy or power during installation and use • Increase competitive advantage—Avient advanced composite solutions can be customized to provide electrical insulation, thermal insulation, radiopacity, low thermal expansion, flexural memory and load damping, while delivering desired performance and aesthetic specifications TRANSPORTATION Truck floors, liners and aerodynamic components, rail car doors and panels, automotive structural solutions, leaf springs, traffic safety markers and delineators, air cargo unit load devices (ULDs) The Avient advanced composites portfolio offers customized solutions to serve a full range of markets and industries, including: USES & APPLICATIONS ENERGY Wind turbine blade stiffening components, sucker rods, oil & gas production solutions BUILDING & CONSTRUCTION Structural blast protection, garage doors, modular construction, temporary shelters, architectural columns, concrete and masonry reinforcements, pipe reinforcement HEALTHCARE External orthopedic fixators, endoscopy wands, prosthetics MARINE Panels for decking, bulkheads, cabinets, doors, transoms, ceilings; reinforcements for stringers; sail battens CONSUMER & RECREATION Archery bow limbs and risers, furniture springs, diving board springs, golf flagpoles, snowsports equipment, sporting stick shafts, paddle shafts, lightweight and extendable mast structures ELECTRICAL & TELECOMMUNICATIONS Utility poles and cross-arms, high voltage transmission & distribution insulator cores, surge arresters, bus bar covers and electrical tool components INDUSTRIAL Pallet stiffeners, pipe reinforcement, conveyor springs, dock shelters PROCESSES & CAPABILITIES Avient’s reinforced composite technologies use carbon, glass and aramid fibers with custom formulated thermoset or thermoplastic resins in continuous forming processes. These methods include: PULTRUSION • Fibers are impregnated with liquid thermoset resins, then pulled through a heated die to cure the resin and form the product • This continuous, automated manufacturing process creates constant cross section profiles of any pre-determined length with consistent, uniform quality and exceptional mechanical performance • Applications include rods and profiles of various lengths and complexities, such as utility poles, insulator core rods and structural beams CONTINUOUS FILAMENT WINDING • Combines the principles of filament winding with pultrusion to create constant or tapered cross- sectional tubing in precision sizes • The unique axial and biaxial fiber orientation provides flexural and tensile strength, as well as crush and burst resistance • Applications include lightweight shelter frames and sporting goods components CONTINUOUS RESIN TRANSFER MOLDING (CRTM™) • Engineered core materials are sandwiched between structural composite laminate face sheets • Continuous composite sandwich panels feature high specific strength and stiffness-to-weight ratio • Applications include ballistic resistant panels, truck floors and rail car doors CONTINUOUS FIBER REINFORCED THERMOPLASTICS • Fully recyclable tape, X-Ply™ (0°/90°), and other multi-ply configurations with widths up to 10' wide • Sandwich panels in unlimited lengths, up to 6" thick and 10' wide • High volume production capacity • Applications include structural and aerodynamic components in transportation, and reinforcement of materials such as wood and metal THERMOSET COMPOSITE LAMINATES & BARSTOCK • Unidirectionally reinforced barstock, laminates and hybrid composites engineered to maximize deflection and fatigue resistance • Customizable shapes and sizes • Applications include archery bow limbs, flat springs, prosthetics, sporting equipment THERMOSET FINISHING OPERATIONS • Customized finishing capabilities for barstock and laminates including machining, water-jet cutting, profiling/shaping, sanding, slitting, laminating, molding and coatings TESTING CAPABILITIES • Mechanical – Flexural, tensile, compression, shear, fatigue, impact resistance • Physical – Specific gravity/density, Barcol hardness, water absorption, void content, resin/fiber content, dye penetrant, viscosity • Thermomechanical – Coefficient of linear thermal expansion, glass transition temperature, deflection temperature, degree of cure, curing properties • Electrical – High-voltage, low current dry arc resistance of solid electrical insulation, dielectric strength, water diffusion ABOUT AVIENT ADVANCED COMPOSITES The Avient advanced composites portfolio consists of Glasforms™, Gordon Composites™ and Polystrand™ branded materials. This leading-edge product offering of high performance alternatives to typical fiber reinforced composites and traditional materials such as wood, ceramic and metal serves applications requiring high strength- to-weight ratios, stiffness, and dimensional stability.

Outplacement Programs Avient offers high-quality outplacement services to associates who have been impacted by workforce reductions. Complēt™ & Onforce™ Long Fiber Reinforced Thermoplastics are formulated for demanding applications that require high stiffness and good impact in structural and metal replacement applications. These tapes and laminates combined high strength, unidirectional fibers and engineered thermoplastic resins to help reduce weight while maintaining exceptional strength and impact resistance.

188.00 FEP PHF CC HIGH BLACK 188.08 FEP PHF CC HIGH GREY 188.82 FEP PHF CC HIGH RED