Having experience in plastic injection molding, Smart Hero knew the material also had to have excellent flow characteristics to be able to fill the complex geometry required for the light. Additionally, the part had to have excellent surface finish and appearance because it is a highly visible consumer part.

PDI) on extruded profiles 2 ASTM D-638 3 ASTM 256 4 ASTM D-648 66 psi, unannealed, 0.125" 5 Savings depends on profile size and production volume Acrylite is a registered trademark of Evonik Performance Materials Lens Performance Resilience™ LS Frost PVC Acrylite® Satinice Frost PMMA Light Transmission1 at 0.060" (1.5mm) 83% Low Diffusion 78% Medium Diffusion 75% High Diffusion 81% Low Diffusion Diffusion Half Power Angle (DLD) 26° Low Diffusion 41° Medium Diffusion 58° High Diffusion 26° Low Diffusion Tensile Strength2 Tensile Modulus2 Tensile Elongation (break)2 7,360 psi 400,000 psi 20% 7,330 psi 330,000 psi 43% Flammability (UL 94) V-0 @ 1.5mm 5VA @ 2.0mm HB @ 1.6mm Notched Izod Impact (73°F)3 2.3 ft-lb/in 0.6 ft-lb/in Heat Deflection Temperature4 157°F/69°C 182°F/83°C UV Stability Good Excellent Chemical Resistance Excellent Good Typical Lens Profile Cost 10–15% Savings5 Baseline 1.866.POLYONE www.polyone.com Copyright © 2018, PolyOne Corporation.

UV STABILIZER/COLOR COMBINATIONS • Combines color and UV stabilization for use in PP and PA • Ingredients screened with accelerated weather testing* • Excellent weather resistance properties (against chalking, embrittlement) • Long-term colorfastness and light stability UV STABILIZER/FLAME RETARDANT/ COLOR COMBINATIONS • Combines low halogen flame retardants, UV stabilizers and color for use in PP and PA • Ingredients screened with accelerated weather testing* • Excellent weather resistance properties (against chalking, embrittlement) • Compliant with local fire standards (e.g.: AFNOR M 2 in France, DIN 4102 B 2 – B 1 in Germany, UNI 8457 – 9174 C 1 in Italy, BKZ 5.2 in Switzerland, BS 5852.1990 CRIB 3-5 in UK)** • Standard portfolio available for PP injection molded applications APPLICATION BULLETIN * Laboratory weathering testing may not be determinative of all conditions of use; the end user must determine suitability of a product for its intended use ** Contact us for more information on regulatory compliance Copyright © 2022, Avient Corporation.

KEY CHARACTERISTICS • Smoke mitigation • Flame resistance • Passes -40° cold impact testing • Crush resistance • UV resistance • Suitable for CSA Teck 90 specification • Excellent tensile strength (2,910 psi) • Natural grades for easy colorability MARKETS & APPLICATIONS This LSFOH thermoplastic meets critical requirements for low-voltage, armored cable jackets. Offering excellent mechanical properties, the ECCOH 5981 UV formulation provides a durable material choice for Teck 90 cables used in demanding locations where safety is paramount.

KEY CHARACTERISTICS • Excellent impact resistance • Lightweight without compromising durability • UV and thermal stability • Ability to withstand harsh conditions • Resistance to rot and rust • Simplified manufacturing processes • Customizable material choice and appearance Ready to make the switch? POLYSTRAND™ THERMOPLASTIC PANELS MATERIALS AND CHARACTERISTICS Facesheet Resins Polypropylene (PP) PETG Facesheet Reinforcement Glass Fiber Core Materials PET Foam PP Honeycomb Characteristics Lightweight Excellent Impact Resistance Formable Value Engineered Facesheets Recyclable 2-layer Composite Laminate 0°/90° Unidirectional Composite Tape 3-layer Composite Laminate 0°/90°/0° 4-layer Composite Laminate 0°/90°/90°/0° POLYSTRAND™ CONTINUOUS FIBER LAMINATES Configuration Wood & Polystrand X-ply 0°/90° Aluminum & Polystrand X-ply 0°/90° Common Material Reinforcements POLYSTRAND™ COMPOSITE SANDWICH PANELS Configuration Fiber Reinforced Facesheet Fiber Reinforced Facesheet Core Material

VERSAFLEX™ HC MEDICAL TUBING SERIES • Improve extrusion rates, achieve high service temperature performance or increase clarity in medical tubing • Meet biopharmaceutical needs for weldability and minimize extractables during processing VERSALLOY™ HC SERIES • Obtain better flow in long, thin paths and lower shrink rates versus typical TPVs with our alloys, made with Santoprene™ TPV • Color easily and obtain a smooth tactile feel VERSAFLEX™ HC GASKETS & STOPPERS SERIES • Achieve no coring, good puncture and resealability in static stoppers • Meet low COF and low stiction requirements in dynamic seals VERSAFLEX™ CL E SERIES • Increase clarity and flexibility in bags, bottles and films • Mitigate risk with plasticizer-free formulations for film extrusion • Deliver excellent odor & O 2 barrier performance for film extrusion INDUSTRY BULLETIN TPE HEALTHCARE PRODUCT SELECTOR GUIDE Versaflex™ HC MT Series Versaflex™ HC MT222 Clear 66A 0.88 14 - 334 2.30 629 4.34 898 6.19 430 220 36 ✔ ✔ High clarity, without plasticizers Versaflex™ HC MT224 Clear 75A 0.89 19 - 468 3.23 773 5.33 1360 9.40 530 321 56 ✔ ✔ Versaflex™ HC MT226 Clear 84A 0.88 20 - 606 4.17 885 6.10 1600 11.00 600 433 76 ✔ ✔ Versaflex™ HC MT317 Clear 68A 0.89 17 69 450 3.10 660 4.55 870 6.00 470 221 39 ✔ ✔ Very high service temperature Versaflex™ HC BT218 Natural 67A 0.89 19 69 381 2.60 683 4.70 1186 8.20 608 - - ✔ ✔ Weldable, kink resistant Versaflex™ HC Gaskets & Stoppers Series Versaflex™ HC 2110-35N Natural 34A 0.90 19 47 145 1.00 261 1.80 400 2.76 620 97 17 ✔ ✔ Good resealing Versaflex™ HC 2110-43N Natural 43A 0.98 12 46 134 0.92 368 2.54 723 4.98 710 - - ✔ ✔ Good compression set Versaflex™ HC 2110-57B Black 59A 1.01 20 37 369 2.54 558 3.85 537 3.70 350 147 26 ✔ ✔ Low stiction Versaflex™ CL E Series Versaflex™ CL E85 Clear 84A 0.90 20 72 752 5.18 1160 8.00 1550 10.70 450 433 76 ✔ ✔ High clarity, without plasticizers; E95 also offers excellent odor & O 2 barrier Versaflex™ CL E90 Clear 90A 0.90 27 73 1000 6.89 1230 8.50 1830 12.60 57 - - ✔ ✔ Versaflex™ CL E95 Clear 95A 0.90 38 71 1680 11.60 1730 11.90 2500 17.20 580 720 126 ✔ ✔ Versaflex™ HC 3810 Series Versaflex™ HC 3810-20N Natural 20A 0.88 16 54 123 0.80 185 1.30 342 2.40 650 - - ✔ - Formulated without animal derivatives, excellent colorability, translucent Versaflex™ HC 3810-30N Natural 30A 0.89 18 58 170 1.20 245 1.70 459 3.20 680 - - ✔ - Versaflex™ HC 3810-40N Natural 40A 0.88 19 59 191 1.30 275 1.90 506 3.50 670 - - ✔ - Versaflex™ HC 3810-50N Natural 50A 0.89 21 61 264 1.80 366 2.50 699 4.80 690 - - ✔ - Versaflex™ HC 3810-60N Natural 60A 0.88 24 65 459 3.20 594 4.10 790 5.40 510 - - ✔ - Versaflex™ HC 3810-70N Natural 70A 0.88 28 67 535 3.70 684 4.70 1000 6.90 570 - - ✔ - Versaflex™ HC 3810-80N Natural 80A 0.88 30 67 689 4.80 869 6.00 1390 9.60 620 - - ✔ - Versaflex™ HC 3810-90N Natural 90A 0.88 27 89 1087 7.50 1350 9.30 1890 13.00 570 - - ✔ - Versalloy™ HC 9210 Series Versalloy™ HC 9210-45N Natural 45A 0.89 19 39 160 1.10 320 2.20 484 3.33 480 100 18 - ✔ Smooth surface aesthetics Versalloy™ HC 9210-55N Natural 53A 0.89 20 44 208 1.44 335 2.31 580 4.00 610 120 21 - ✔ Versalloy™ HC 9210-70N Natural 70A 0.89 23 53 356 2.45 510 3.52 780 5.38 590 180 32 - ✔ Versalloy™ HC 9220 Series Versalloy™ HC 9220-70 Natural 70A 0.95 17 51 453 3.12 - - 643 4.43 265 208 36 ✔ ✔ ExtrudableVersalloy™ HC 9220-80 Natural 80A 0.94 18 59 553 3.67 777 5.36 945 6.52 415 208 36 ✔ ✔ Versalloy™ HC 9220-90 Natural 90A 0.94 25 55 1030 8.13 1350 9.33 1945 13.45 620 400 70 ✔ ✔ Standard Healthcare Grades Versaflex™ G2705N Natural 60A 0.88 - - - - 528 3.64 670 4.62 470 - - ✔ ✔ Natural, high strength Versaflex™ CL 2242 Clear 43A 0.89 23 - 152 1.05 294 2.02 731 5.00 780 124 22 ✔ ✔ High clarity, boilable Versaflex™ CL 2250 Clear 50A 0.89 20 - 220 1.52 337 2.32 827 5.70 770 140 25 ✔ ✔ Versaflex™ OM Series Versaflex™ OM 1040X Natural 42A 0.92 22 - 180 1.24 301 2.08 504 3.47 580 100 18 ✔ ✔ ABS/PC overmoldVersaflex™ OM 3060 Clear 59A 0.90 33 - 420 2.90 360 2.48 500 3.45 480 180 32 ✔ ✔ Color Hardness Specific Gravity Compression Set @ 23°C Compression Set @ 100°C 100% Modulus 300% Modulus Tensile Strength Elongation Tear Strength ISO 10993 USP VI Special Characteristics ASTM Shore A ASTM/ISO ASTM % ASTM % ASTM psi Mpa ASTM psi Mpa ASTM psi ISO Mpa ASTM % ASTM pll ISO kN/m GENERAL PROPERTIES TENSILE PROPERTIES OTHER For further information on specific grades, review technical data sheets.

It has good tensile, thermal, flex, and impact properties like nylon (PA) while maintaining excellent wear and chemical resistance. The improved chemical resistance and lower moisture absorption properties combine with the eco-conscious benefits to make Edgetek™ PKE and long fiber Complēt™ PKE polyketone composites an excellent choice for powersports applications that require consistent performance across different and demanding environments. APPLICATION BULLETIN IMPROVED CHEMICAL RESISTANCE Engineered polyketone delivers excellent performance against aggressive chemicals, like H2SO4 for batteries (Figure 1), and performs similarly to nylon against typical chemicals tested in powersports, such as gasoline* (Figure 2).

Operational Excellence Empowers us to respond to the voice of the customer with relentless continuous improvement. Commercial Excellence Governs our activities in the marketplace to deliver extraordinary value to our customers. Excellence.

Operational Excellence Empowers us to respond to the voice of the customer with relentless continuous improvement. Commercial Excellence Governs our activities in the marketplace to deliver extraordinary value to our customers. Excellence.

PolyOne Corporation Page 4 PolyOne Commodity to Specialty Transformation • Volume driven, commodity producer • Heavily tied to cyclical end markets • Performance largely dependent on non- controlling joint ventures 2000-2005 2006 - 2009 2010 – 2014 2015 and beyond • Steve Newlin appointed, Chairman, President and CEO • New leadership team appointed • Implementation of four pillar strategy • Focus on value based selling, investment in commercial resources and innovation to drive transformation • 20 consecutive quarters of double- digit adjusted EPS growth • Shift to faster growing, high margin, less cyclical end markets • Key acquisitions propel current and future growth, as well as margin expansion • Established aggressive 2015 targets • Continue specialty transformation • Goal of $2.50 adjusted EPS by 2015, three times the EPS generated in 2011 of $0.82 • Drive double digit operating income and adjusted EPS growth PolyOne Corporation Page 5 Building & Construction 13% Industrial 12% Transportation 18% Wire & Cable 9% Packaging 16% Consumer 10% HealthCare 11% Appliance 6% Electronics & Electrical 5% 2013 Revenues: $3.8 Billion End Markets 2013 Revenues: $3.8 Billion PolyOne At A Glance United States 67% Europe 14% Canada 7% Asia6% Latin America 6% Specialty 54% PP&S 18% Distribution 28% $13 $31 $46 $46 $92 $96 $122 $195 $0 $50 $100 $150 $200 2006 2007 2008 2009 2010 2011 2012 2013 Specialty Operating Income PolyOne Corporation Page 6 Old PolyOne *Operating Income excludes corporate charges and special items 2% 34% 43% 62% 65% 0% 20% 40% 60% 80% 100% 2005 2008 2010 2013 2014 YTD 2015 % o f O pe ra tin g In co m e* JV's Performance Products & Solutions Distribution Specialty 65-75% Specialty OI $5M $46M $87M $195M $191M Target Mix Shift Highlights Specialty Transformation Transformation 2015 Target PolyOne Corporation Page 7 Confirmation of Our Strategy The World’s Premier Provider of Specialized Polymer Materials, Services and Solutions Specialization Globalization Operational Excellence Commercial Excellence PolyOne Corporation Page 8 Strategy and Execution Drive Results $0.12 $0.27 $0.21 $0.13 $0.68 $0.82 $1.00 $1.31 '06 '07 '08 '09 '10 '11 '12 '13 ‘06-‘13 EPS CAGR = 41% EPS Share Price vs. S&P 500 -150% -50% 50% 150% 250% 350% 450% 550% POL S&P 500 All time high of $43.34 July 1st, 2014 PolyOne Corporation Page 9 2006 2014 YTD 2015 “Where we were” “Where we are” Target 1) Operating Income % Specialty: Global Color, Additives & Inks 1.7% 14.9% 12 – 16% Global Specialty Engineered Materials 1.1% 12.1% 12 – 16% Designed Structures & Solutions -- 7.6% 8 – 10% Performance Products & Solutions 5.5% 8.1% 9 – 12% Distribution 2.6% 6.2% 6 – 7.5% 2) Specialty Platform % of Operating Income 6.0% 65% 65 – 75% 3) ROIC* 5.0% 10.6% 15% 4) Adjusted EPS Growth N/A 37% Double Digit Expansion Proof of Performance & 2015 Goals *ROIC is defined as TTM adjusted OI divided by the sum of average debt and equity over a 5 quarter period PolyOne Corporation Page 10 32% Adjusted EPS CAGR from 2011 2015 EPS: $2.50 2011 EPS: $0.82 Continued Gross Margin Expansion Mergers & Acquisitions Spartech Accretion Incremental Share Buybacks Ongoing LSS Programs (50-100 bps/yr) Accelerated Innovation & Mix Improvement Several Levers to Drive Growth Mid Single Digit Revenue Growth PolyOne Corporation Page 11 Innovation Drives Earnings Growth *Percentage of Specialty Platform revenue from products introduced in last five years $20 $53 2006 2013 Research & Development Spending ($ millions) Specialty Platform Vitality Index Progression* 14% 31% 2006 2013 Specialty Platform Gross Margin % 20% 43% 2006 2013 Specialty Vitality Index Target ≥ 35% Vitality Products + 700 to 1000 bps PolyOne Corporation Page 12 Prototype Frame Opportunity Scale-up & Test Market Build Business Case Commercial Launch Phase 1 Phase 2 Phase 3 Phase 4 Phase 5 4 11 5 10 6 9 3 4 2 15 9 1 10 4 Breakthrough Platform Derivative A Rich Pipeline of Opportunity Number of Projects 25 14 19 17 18 93 Addressable Market ($ millions) TBD TBD $800 $450 $450 $1,700 PolyOne Corporation Page 13 Megatrends Aligned with Key End Markets Decreasing Dependence on Fossil Fuels Protecting the Environment Improving Health and Wellness Megatrend End Markets Globalizing and Localizing Health & Wellness Transportation Packaging Consumer PolyOne Corporation Page 14 60% 100% 20% 30% 40% 50% 60% 70% 80% 90% 100% 2008 2014 Pension Funding** As of September 30, 2014 Debt Maturities & Pension Funding – 9/30/14 Net Debt / EBITDA* = 1.7x $48 $317 $600 $0 $100 $200 $300 $400 $500 $600 $700 $800 2015 2020 2023 Debt Maturities As of September 30, 2014 ($ millions) Coupon Rates: 7.500% 7.375% 5.250% ** includes US-qualified pension plans only *TTM 9/30/2014 PolyOne Corporation Page 15 Free Cash Flow and Strong Balance Sheet Fund Investment / Shareholder Return Expanding our sales, marketing, and technical capabilities Targets that expand our: • Specialty offerings • End market presence • Geographic footprint • Operating Margin Synergy opportunities Adjacent material solutions Repurchased 1.5 million shares in Q3 2014 Repurchased 9.7 million shares since early 2013 10.3 million shares are available for repurchase under the current authorization Organic Growth Acquisitions Share Repurchases Dividends  Investing in operational and LSS initiatives (including synergy capture) Manufacturing alignment $0.16 $0.20 $0.24 $0.32 $0.40 $0.10 $0.20 $0.30 $0.40 $0.50 2011 2012 2013 2014 2015 Annual Dividend PolyOne Corporation Page 16 PolyOne Core Values Innovation Collaboration Excellence PolyOne Corporation Page 17 The New PolyOne: A Specialty Growth Company Why Invest In PolyOne? Appendix Q3 2014 Financial Highlights At a Glance�Global Color, Additives and Inks At a Glance�Global Specialty Engineered Materials At a Glance�Designed Structures and Solutions At a Glance�Performance Products and Solutions At a Glance�Distribution Plastics: Key to Future Sustainable Development Commitment to Operational Excellence Application Examples Slide Number 28 Anti-Counterfeiting Solutions 2012 Range Rover Evoque Interior Slide Number 31 Metal Replacement Solutions Next Generation Solar Charger High-Barrier Packaging Containers Aerospace Applications Non GAAP Rec - 11 5 14.pdf Sidoti & Company non-GAAP Rec