Steel – Static 0.25 0.46 0.18 0.15 0.12 0.19 0.11 0.14 0.13 0.24 0.17 0.17 Impact Notched Izod Impact (23°C, 3.18 mm, Injection Molded) J/m ASTM D256A 41 64(6) 110 107 107 70 80 37 37 75 – 69 Thermal Properties Heat Deflection Temperature ASTM D648 0.45 MPa °C 215(6) – 250 215 216 184 152 151(6) 153(6) 218(6) – – 1.8 MPa °C 65(6) 239(7) 244(6) 210 210 75 94 81.1(6) 88 197(6) – 135(5) Electrical Properties Surface Resistivity ohms/sq ASTM D254 – – – 1.30x1012 1.9x1012 5.2x1012 – – – – – 1.0x109 Dielectric Strength (Short Time) kV/mm – – 8.5 – – – – – – – – – Flammability Flame Rating Class UL 94 HB – – HB HB HB – HB – – – – LubriOne™ Internally Lubricated Formulations NOTES (1) Type I, 5.1mm/min (2) Type I, 21.3 mm/min (3) Type I, 50 mm/min (4) Type I, 5.1mm/min, Break (5) 3.2 mm thick, Unannealed (6) 6.35 mm thick, Unannealed (7) 3.2 mm thick, Annealed PRODUCT DESCRIPTION UNITS TEST METHOD LB6000- 5024 RS HI Natural LB6000- 5021 RS S1 Black LB6000- 5021 RS X2 Black LB6000- 5019 X1 Black LB6700- 5001 RS AF Black NN- 000/01M Black SO REC LB6600- 5030 RS Grey LB3300- 5010 RS Natural LB3300- 5005 RS Natural REC LB3220- 5001 RS C Natural X1 LB8900- 5010 GP Grey LB8900- 5006 RS PE Natural LB8900- 5004 RS PE Natural LB4200- 5022 Black LB4200- 5023 Natural Base Polymer PA 6 PA6/PA66 PA66 PBT PC PKE POM Lubricant UHMWPE1 UHMWPE UHMWPE UHMWPE UHMWPE MoS22 Graphite UHMWPE UHMWPE UHMWPE Graphite UHMWPE UHMWPE MoS2 UHMWPE Filler type GF10 GF30 GF30 GF50 GF50 Unfilled GF33 GF20 MI20 GF10 Unfilled GF20 GF30 Unfilled Unfilled General Properties Specific Gravity g/cm3 ISO 1183 1.18 1.35 1.39 1.55 1.58 1.14 1.44 1.42 1.46 1.23 1.26 1.34 1.43 1.4 1.35 Mechanical Properties Tensile Modulus (23°C) MPa ISO 527-1 4250 9500 9000 15500 16600 3500 10600 6300 3330 4000 1630 5300 9250 2470 2150 Tensile Strength (Yield, 23°C) MPa ISO-527-2 97 150 160 205 200 85 164 102 55 60 60 108 99.1 55 50 Tensile Elongation (Break, 23°C) % ISO-527-2 12 2.5 3 2.7 2.4 3.4 2.0 4.2 8 2.5 46 3.7 1.5 11 11 Flexural Strength (23°C) MPa ISO 178 103 – – 285 265 108 215 127 78 85 38 155 117 73 68 Flexural Modulus (23°C) MPa ISO 178 3250 – – 12400 11100 2690 9000 4700 3000 3100 1380 4600 5450 2210 2070 Impact Charpy Notched Impact Strength (23°C, Injection Molded) kJ/m^2 ISO 179 14 12 10 15 10 3 6 7.7 4.3 12 15 10 7.6 8 5 Charpy Unnotched Impact Strength (23°C, Injection Molded) kJ/m^2 ISO 179 82 55 61 75 60 65 50 47 69 - NB 63 36 NB NB Thermal Properties Deflection Temperature Under Load 1.8 Mpa, Unannealed °C ISO 75-2/A 107 – – 204 – 73 235 – – – 90 210 204 86 80 Cofficient of Friction (CoF) & Wear Rate CoF vs.

Base Resin ABS PA PBT PC PE PEEK PP PPS Barrel Temperatures °F (°C) Rear Zone 400–475 (200–250) 480–540 (248–282) 480–520 (250–270) 480–570 (250–300) 400–445 (200–230) 660–700 (350–475) 400–440 (200–225) 520–600 (270–300) Center Zone 410–480 (205–253) 490–550 (254–287) 485–525 (251–273) 500–580 (260–305) 410–455 (207–237) 670–710 (357–385) 410–450 (205–230) 550–610 (285–310) Front Zone 420–490 (210–257) 500–560 (260–293) 490–530 (254–276) 515–590 (267–310) 420–465 (213–243) 680–720 (363–400) 420–455 (215–235) 570–620 (300–320) Nozzle 425–500 (215–260) 510–570 (265–298) 490–540 (254–282) 530–600 (275–315) 430–475 (220–250) 700–730 (370–395) 430–460 (220–240) 610–620 (320–325) Melt Temperature 425–515 (215–270) 510–570 (265–298) 490–540 (254–282) 530–615 (275–325) 430–495 (220–260) 700–725 (370–385) 430–475 (220–250) 610–635 (320–335) Mold Temperature 140–200 (60–90) 150–300 (65–148) 140–280 (60–137) 160–240 (70–115) 80–140 (25–60) 300–400 (150–200) 80–140 (25–60) 190–300 (90–150) Drying Parameters 190 (90) 2–4 Hours 0.01%–0.15% 180 (82) 4–5 Hours 0.10%–0.20% 275 (135) 3–4 Hours 0.02%–0.04% 250 (125) 3–4 Hours 0.02% 160 (70) 2 Hours 300 (150) 3–4 Hours 0.10% 160 (70) 2 Hours 280 (135) 2–3 Hours 0.01%–0.20% Nozzle Type General Purpose Nylon or Reverse Taper General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose Injection Velocity1 2–5 in/sec; 50–127 mm/sec Injection Pressure Medium to high (may range from 1,000–4,000 psi; 7-28 Mpa) Back Pressure 50–100 psi; 0.3–0.7 Mpa Screw Speed 25–75 RPM Cushion 0.125–0.250 in; 3–6 mm Screw Compression Ratio2 2.0:1–2.5:1 Processing Guide 3 Base Resin ABS PA PBT PC PE PEEK PP PPS Barrel Temperatures °F (°C) Rear Zone 400–475 (200–250) 480–540 (248–282) 480–520 (250–270) 480–570 (250–300) 400–445 (200–230) 660–700 (350–475) 400–440 (200–225) 520–600 (270–300) Center Zone 410–480 (205–253) 490–550 (254–287) 485–525 (251–273) 500–580 (260–305) 410–455 (207–237) 670–710 (357–385) 410–450 (205–230) 550–610 (285–310) Front Zone 420–490 (210–257) 500–560 (260–293) 490–530 (254–276) 515–590 (267–310) 420–465 (213–243) 680–720 (363–400) 420–455 (215–235) 570–620 (300–320) Nozzle 425–500 (215–260) 510–570 (265–298) 490–540 (254–282) 530–600 (275–315) 430–475 (220–250) 700–730 (370–395) 430–460 (220–240) 610–620 (320–325) Melt Temperature 425–515 (215–270) 510–570 (265–298) 490–540 (254–282) 530–615 (275–325) 430–495 (220–260) 700–725 (370–385) 430–475 (220–250) 610–635 (320–335) Mold Temperature 140–200 (60–90) 150–300 (65–148) 140–280 (60–137) 160–240 (70–115) 80–140 (25–60) 300–400 (150–200) 80–140 (25–60) 190–300 (90–150) Drying Parameters 190 (90) 2–4 Hours 0.01%–0.15% 180 (82) 4–5 Hours 0.10%–0.20% 275 (135) 3–4 Hours 0.02%–0.04% 250 (125) 3–4 Hours 0.02% 160 (70) 2 Hours 300 (150) 3–4 Hours 0.10% 160 (70) 2 Hours 280 (135) 2–3 Hours 0.01%–0.20% Nozzle Type General Purpose Nylon or Reverse Taper General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose Injection Velocity1 2–5 in/sec; 50–127 mm/sec Injection Pressure Medium to high (may range from 1,000–4,000 psi; 7-28 Mpa) Back Pressure 50–100 psi; 0.3–0.7 Mpa Screw Speed 25–75 RPM Cushion 0.125–0.250 in; 3–6 mm Screw Compression Ratio2 2.0:1–2.5:1 Comments 1. PC Compounds: 0.001"–0.002" depth and 0.250" width PC/PSU Compounds: 0.002"–0.003" depth and 0.250" width PES Compounds: 0.003"–0.004” depth and 0.250" width PEI Compounds: 0.001"–0.003” depth and 0.250" width PP Compounds: 0.001"–0.002” depth and 0.250" width ABS Compounds: 0.0015"–0.0025” depth and 0.250" width PEEK Compounds: 0.002"–0.004” depth and 0.250" width Nylon Compounds: 0.002" min. depth and 0.250" width Increase vent depth to 1.0mm (0.040") at 4.0mm (0.250") away from the cavity and vent to atmosphere.

Polypropylene (PP) Polyethylene (PE) Polystyrene (PS) Thermoplastic Elastomer (TPE) Thermoplastic Polyurethane (TPU) Polyamide (PA) Copolyester (CoPET) Thermoplastic Vulcanizates (TPV) Polycarbonate (PC) Acrylonitrile Butadiene Styrene (ABS) Polycarbonate/ABS (PC/ABS) www.avient.com Copyright © 2020, Avient Corporation.

Purge thoroughly before and after use of this product with a low flow (0.5–2.5 MFR) PE or PP.

SOLUTIONS FOR FIBER OPTIC CABLE Engineered Fibers, Color & Additives, Specialty Engineered Materials BINDER YARN Flat, low-profile Highly absorbent (up to 65x its weight) BUFFER TUBE SWELLABLE YARN Cleaner than gel Highly absorbent WATER SWELLABLE FRP Non-corrosive, non-conductive, No flaking or shedding Overcoat and upjacketing available STRENGTH MEMBER Aramid or fiberglass yarn Processes cleanly with minimal dust UNDER-SHEATH RIPCORD Swellable, non-wicking Available in colors for easy identificationLASER MARKING ADDITIVES Provide good contrast in black outer jacket for outdoor exposure JACKET Color formulations for PVC, PE, TPU, TPC UV protective additives Non-halogenated colors for LSFOH LSFOH UV formulations for high flame retardancy, chemical and UV resistance, low COF TPE Polyamide, custom polyolefins LOOSE TUBES, TIGHT BUFFERS AND MICRO-MODULES LSFOH UV formulations for improved processing speeds, strippability & gel resistance Customized formulations: PBT PP TPE Color formulations for polyamide, PBT, LSFOH , TPE, TPC (Thermoplastic Copolyester) Laser marking additives https://www.avient.com/products/fiber-line-engineered-fiber-solutions/fiber-line-engineered-fiber-products/ripcords-fiber-optic-cable https://www.avient.com/products/fiber-line-engineered-fiber-solutions/fiber-line-engineered-fiber-products/water-blocking-absorbing-yarn https://www.avient.com/products/fiber-line-engineered-fiber-solutions/fiber-line-engineered-fiber-products/water-blocking-absorbing-yarn https://www.avient.com/products/fiber-line-engineered-fiber-solutions/fiber-line-engineered-fiber-products/fiber-reinforced-polymer https://www.avient.com/products/fiber-line-engineered-fiber-solutions/fiber-line-engineered-fiber-products/strength-members https://www.avient.com/products/fiber-line-engineered-fiber-solutions/fiber-line-engineered-fiber-products/ripcords-fiber-optic-cable https://www.avient.com/products/polymer-additives/performance-enhancement-additives/oncap-laser-marking-additives https://www.avient.com/products/polymer-colorants/solid-color-masterbatches/oncolor-wire-cable https://www.avient.com/products/polymer-additives/uv-and-light-blocking-additives/oncap-uv-stabilizer-additives https://www.avient.com/products/polymer-colorants/solid-color-masterbatches/oncolor-wire-cable https://www.avient.com/products/engineered-polymer-formulations/eco-conscious-formulations/eccoh-low-smoke-and-fume-non-halogen-formulations https://www.avient.com/products/engineered-polymer-formulations/eco-conscious-formulations/eccoh-low-smoke-and-fume-non-halogen-formulations https://www.avient.com/products/thermoplastic-elastomers/onflex-thermoplastic-elastomers https://www.avient.com/products/engineered-polymer-formulations/general-engineered-formulations https://www.avient.com/products/engineered-polymer-formulations/eco-conscious-formulations/eccoh-low-smoke-and-fume-non-halogen-formulations https://www.avient.com/products/engineered-polymer-formulations/eco-conscious-formulations/eccoh-low-smoke-and-fume-non-halogen-formulations https://www.avient.com/products/engineered-polymer-formulations/general-engineered-formulations/bergadur-polyester-formulations https://www.avient.com/products/engineered-polymer-formulations/general-engineered-formulations https://www.avient.com/products/thermoplastic-elastomers/onflex-thermoplastic-elastomers https://www.avient.com/products/polymer-colorants/solid-color-masterbatches/oncolor-wire-cable https://www.avient.com/products/polymer-colorants/solid-color-masterbatches/oncolor-wire-cable https://www.avient.com/products/polymer-additives/performance-enhancement-additives/oncap-laser-marking-additives

• Cesa™ Unify™ A4R Polyolefin Compatibilizer helps bring incompatible polymers like PP and PE together by forming them into a homogenous polymer mixture which increases the mechanical properties of the recycled polymer. • Cesa™ impact modifier for polystyrene improves the impact strength of recycled polystyrene (rPS) with limited impact on the Young’s modulus.

Improve color usage efficiency with increased pigment density • Drop-in solution compatible with your current process • Incorporate higher loadings of PCR while maintaining color design aesthetic TARGET MARKET AND APPLICATIONS Compatible with: • PE, PP or PET multi-layer containers • Extrusion blow molding • Injection molding (caps and closures) PRODUCT BULLETIN NO SURPRISES PLEDGESM At Avient, we are committed to helping you grow your business with safe and environmentally sound solutions.

COLORANT CHROMATICS HIGH-TEMPERATURE POLYMER FORMULATIONS PRODUCT SELECTION GUIDE COLORANT CHROMATICS HIGH TEMPERATURE COMPOUNDS PROPERTY ISO Test Method Units PES PPSU PEI LCP PEEK PSU PHYSICAL Density 1183 — 1.37 1.29 1.27 1.40 1.30 1.24 Mold Shrinkage Flow/X-flow 294–4 % 0.8/0.85 0.7/XX 0.6/0.7 0/0.7 1.0/1.3 0.7 MECHANICAL Tensile Strength 527 Mpa 85 70 85 200 100 70 Tensile Elongation Yield 527 % 7 7.5 6 — — 6 Tensile Elongation Break 527 % >25 >60 60 3 30 >50 Izod Notched 180 kJ/m2 7 55 5 95 7 5.5 THERMAL HDT 1.8 MPa 75 °C 205 200 190 190 150 175 FLAMMABILITY Flame Rating UL-94 — V-0 V-0 V-0 V-0 V-0 HB ADDITIONAL Steam Sterilizable — Cycles 100 2000 2000 1500 1000 100 CUSTOM OPTIONS Color — — Yes Yes Yes Yes Yes Yes Reinforced — — Yes Yes Yes Yes Yes Yes Conductive — — Yes Yes Yes Yes Yes Yes Lubricated — — Yes Yes Yes No Yes Yes Radiopaque — — Yes Yes Yes No Yes Yes Trade Names — — Veradel Ultrason E Radel Ultrason P Ultem Vectra Zenite Xydar KetaSpire Victrex Vestakeep Udel Ultrason S Avient high temperature precolored and specialty compounds are your solutions for high performance products.

PG18388 WT PE PG18390 GN PE PG18381 WT PE

UV WHITE PE UV BEIGE PE UV GRAY PE