Seller may discontinue any Product sold hereunder at any time, unless Buyer and Seller have otherwise agreed in writing. 6. Buyer shall have no right of set-off. In any such event as described above, all outstanding claims of Seller shall become due and payable immediately with respect to the Products delivered to Buyer and not repossessed by Seller. 10.

FIBER-LINE™ PERFORMANCE ENHANCING COATINGS PRODUCT SELECTION GUIDE FIBER-LINE™ COATING SELECTION GUIDE COATING Bondcoat™ Adhesion Enhancing Colorcoat™ Fiber Color Packcoat™ Performance Enhancing Protexcoat™ UV Resistant Swellcoat™ Blocker Water Blocking Swellcoat™ Water Absorbing Wearcoat™ High Abrasion Blockcoat™ Anti-Wicking Repelcoat™ Water Repellant Flamecoat™ Flame Resistant FEATURES • Created for applications where an untreated fiber does not have the ability to provide the appropriate amount of bonding characteristics to another material • Provides adhesion to another fiber or substrate without impacting other performance properties • Improves adhesion of the fiber to the resin matrix it is introduced into • Enables industry standard “burst” tests or stringent delamination analysis • Designed to achieve vibrant colors for safety, identification, and aesthetics • Specialized formulas and binders adhere the pigment to the exterior of the individual filaments, while impregnating deep into the fiber bundle • Available by Pantone or RAL number • Compatible with a variety of composite resins including epoxy, polyurethane, and polyethylene • Stronger than solution-dyed fibers • Designed to add lubricity and temperature resistance at the filament level for braided compression packing • Coating at the fiber level versus the finished braid achieves higher % level coating • Fiber level coating extends the life of the braid and reduces required maintenance • Various formulations available • PTFE, silicone, graphite, and mineral oil • Created for high performance fibers that lack inherent ultraviolet (UV) resistance • Coating impregnates the individual fibers with a specialized resin for improved UV protection • Coating enhancements include UV inhibitors, absorbers and stabilizers • Improves the processing of the product via reduced filament snagging and friction • Low level water- blocking finish for any technical fiber or textile substrate • Provides water- blocked strength reinforcements for dry cable designs • Can absorb 5x to 15x its weight in water • Dust-free coating imparts a very soft fiber hand, advantageous to cable, rope, and other textile processes • Patented technology incorporates super absorbent polymer (SAP) suspended in a proprietary resin matrix • Used in the production of ‘dry-dry’ telecommunications, electromechanical, seismic, umbilical and power cables • Can absorb up to 100x its weight in water • Creates a stable gel when exposed to water • Functionally replaces flooding compounds, filling gels, spun SAF yarns, and water blocking tapes • Enables faster, more economical and robust cable manufacturing • Increases durability and abrasion resistance by encapsulating filaments in the fiber bundle • Extends the life of the product by reducing the effects of friction and yarn on yarn abrasion • Protects the fiber from degradation and filamentation • Ideal for high abrasion and high friction applications in a range of fiber constructions and environments • Wicking refers to the tendency of a yarn or other fiber to draw moisture into filaments via capillary action • Coatings designed to prevent moisture from wicking within and between fibers and strands • Protects Wire or Optical Fiber from damaging effects of moisture, which can cause a drop in signal and attenuation • Hydrophobic additives used to promote and enhance water repellancy in industrial applications • Creates a waterproof barrier that prevents moisture from further migration • Applied at various % levels to optimize for water-proof ratings • Designed to inhibit or slow the spread of fire/flame • Coupled to fibers with inherent flame and thermal resistance to boost performance • Added to fibers with weak flame resistance to improve burn rating SUITABLE FIBERS • Kevlar® Para-Aramid • Nomex® Meta-Aramid • Vectran® LCP • Zylon® PBO • Technora® Fiber • Carbon Fiber • Kevlar® Para-Aramid • Nomex® Meta-Aramid • Vectran® LCP • PET Polyester • Fiberglass • UHMWPE • Kevlar® Para-Aramid • Nomex® Meta-Aramid • Carbon Fiber • Graphite Fiber • Fiberglass • PTFE Fiber • Kevlar® Para-Aramid • Vectran® LCP • Zylon® PBO • Technora® Fiber • Kevlar® Para-Aramid • Vectran® LCP • Zylon® PBO • PET Polyester (All shrinks) • UHMWPE • Kevlar® Para-Aramid • Vectran® LCP • Zylon® PBO • Technora® Fiber • Fiberglass • PET Polyester (All shrinks) • Kevlar® Para-Aramid • Vectran® LCP • Zylon® PBO • Carbon Fiber • PET Polyester (All shrinks) • UHMWPE • Kevlar® Para-Aramid • Vectran® LCP • Zylon® PBO • Carbon Fiber • PET Polyester (All shrinks) • Fiberglass • Kevlar® Para-Aramid • Vectran® LCP • Zylon® PBO • Carbon Fiber • PET Polyester (All shrinks) • Fiberglass • Kevlar® Para-Aramid • Vectran® LCP • Zylon® PBO • PET Polyester (All shrinks) PRODUCTS • Belt & Hose Reinforcement Yarn • Strength Members • Industrial Fabric Yarn • Wire Harness Yarn • Ripcords • Strength Members • Wire Harness Yarn • Industrial Fabric Yarn • Braided compression rings and seals • Valve stem packing • Pump packing • Strength Members • Industrial Fabric Yarn • Wire Harness Yarn • Strength Members • Ripcords • Binder Yarn • Filler Yarn • Synthetic Wire Rope • Buffer Thread • Binder Yarn • Filler Yarn • Strength Members • Ripcords • FRP Rod • Ripcords • Strength Members • Synthetic Wire Rope • Industrial Fabric Yarns • Wire Harness Yarns • Ripcords • Strength Members • Binder Yarn • Industrial Fabric Yarns • Wire Harness Yarns • Ripcords • Strength Members • Binder Yarn • Industrial Fabric Yarns • Wire Harness Yarns • Industrial Fabric Yarns • Wire Harness Yarns • Strength Members Kevlar® and Nomex® are trademarks of DUPONT SAFETY & CONSTRUCTION, INC. You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.

Knowledge of fiber technology is the essence of what we offer to our customers. Since 1987, we have processed a myriad of high-performance synthetic fibers for a wide variety of markets and applications. We strive to pass our fiber knowledge, expertise, and decades of experience on to our customers.

Buyer shall have no right of set-off. In any such event as described above, all outstanding claims of Seller shall become due and payable immediately with respect to the Products delivered to Buyer and not repossessed by Seller. 10. Seller does, however, have the right to bring any dispute before any competent court where the Buyer is domiciled. 22.

In no event shall Seller have liability to Buyer for any incidental, or indirect damages. Buyer shall have no right of set-off. Thereafter, Buyer shall be considered as having tacitly approved the invoice. 7.

EXTRUSION FILM MANUFACTURER S I G N B O A R D P R O T E C T I V E T A P E • Film application with a high concentration of TIO2 (>80%) • Good performance on light fastness and anti-yellowing OnColor Polymer Colorants KEY REQUIREMENTS WHY AVIENT? All Rights Reserved. • Provided excellent dispersion with highly concentrated TiO2 • Offered customized solutions to achieve customer request on TiO2 % @ 80% • Maintained good light fastness https://www.avient.com/products/polymer-colorants Slide 1: EXTRUSION FILM MANUFACTURER

KEY CHARACTERISTICS • Manufactured under change control principles beyond CAS number (similar level as MEVOPUR concentrates), reducing risk of change • Free from animal-derived substances and phthalates • Suitable for blown film, injection molding, blow molding and extrusion REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 - USP chapters , including Class VI, a requirement for ophthalmic and nasal drugs - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities - USP and USP light transmission • Registered Drug Master File (Type III) • Food contact compliance established with FDA/EU* APPLICATION BULLETIN CARRIER MATERIAL PIGMENT CONTENT/TYPE LIGHT FASTNESS THERMAL STABILITY PRODUCT CODE HDPE 50% TiO2 8 300°C PH00075525 LLDPE 60% TiO2 8 300°C PL00075542 LLDPE 70% TiO2 8 300°C PL00075545 PP 50% TiO2 8 300°C PP00075717 Healthcare use limitations apply—see below. You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product. Avient products have not been designed for nor are they promoted or intended for use in: (a) medical devices categorized by either the United States Food and Drug Administration (FDA) or the International Standards Organization (ISO) as an “implant” device; or “Permanent” as defined under US Pharmacopoeia (USP) or ISO standards; or (b) active implantable medical devices as defined in EU Directive 90/385/EEC as amended; or (c) medical devices for “Long Term” use as defined in EU Directive 93/42/EEC as amended.

As an example,easy-open ergonomic caps overmolded with soft touch TPEs have been endorsed by the Arthritis Foundation for their improved usability. GENERAL PURPOSE GLS TPES FOR PACKAGING SOFT TOUCH GRIPS BONDING TO POLAR SUBSTRATES GENERAL PURPOSE GLS TPES FOR PACKAGING SOFT TOUCH GRIPS BONDING TO NON POLAR SUBSTRATES Dynaflex™ G2711 Dynaflex™ G2780 Dynaflex™ G6713 Dynaflex™ G7960 Versalloy™ XL9045 Versaflex™ CL40 Aesthetics Grippy, 43A & translucent Low tack, 84A & translucent Extra soft, 13A & translucent Rubbery, 60A & opaque Matte, 45A & natural Grippy, 40A & water clear Special Characteristics Grippy medical grade PP & PE OM Extra soft General purpose High flow & fast setup Water clear Regulatory FDA, EU & USP VI FDA FDA & EU FDA FDA FDA & EU Overmolding Polypropylene Polypropylene & Polyethylene Polypropylene Polypropylene Polypropylene Polypropylene Versaflex™ CL 2250 Versaflex™ OM 3060 Versaflex™ CE 3120-65 Versaflex™ CE 3620 Versollan™ RU 2205 Aesthetics Grippy, 50A & clear Grippy, 59A & clear Silky feel, 65A & matte finish Silky feel, 65A & matte finish Grippy, 65A & matte finish Special Characteristics Clear overmold Clear overmold Abrasion resistance & high strength Low compression set & high flow Abrasion resistance & high strength Regulatory FDA & USP VI FDA & USP VI UL 94 FDA & ISO 10993-10 — Overmolding Polycarbonate Polycarbonate & ABS Polycarbonate, ABS, Copolyester & Nylon 12 Polycarbonate, ABS, Copolyester Polycarbonate, ABS, Copolyester & Nylon 12 1.844.4AVIENT www.avient.com Copyright © 2020, Avient Corporation. You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.

Seller may discontinue any Product sold hereunder at any time, unless Buyer and Seller have otherwise agreed in writing. 6. Buyer shall have no right of set-off. In any such event as described above, all outstanding claims of Seller shall become due and payable immediately with respect to the Products delivered to Buyer and not repossessed by Seller. 10.

Seller may discontinue any Product sold hereunder at any time, unless Buyer and Seller have otherwise agreed in writing. 6. Buyer shall have no right of set-off. In any such event as described above, all outstanding claims of Seller shall become due and payable immediately with respect to the Products delivered to Buyer and not repossessed by Seller. 10.