Drying non-halogenated materials is suggested. 2 hours @ 100 (38) Moisture Range (%) Not required Follow up by purging machine with general purpose PP • Residence time should not exceed 5 minutes for Maxxam FR products • General ventilation is suggested Shut Down • Purge the equipment with a general purpose PP • All tooling and equipment must be free of any residual Maxxam FR upon shut down • Continue generating parts made from the natural PP until clear • Wipe down tool steel with mold cleaner • When using a hot runner system, care must be taken to remove residual product from the manifold MOLD DESIGN RECOMMENDATIONS Cold Slug Wells • Place cold slug wells at the base of the sprue to capture the cold material first emerging from the nozzle • Place cold slug wells at every 90° bend in the runner system • Well depths approximately 2–3 times the diameter of the runner provide best results Draft Angle • Draft angle should be 1/2°–1° per side.

BATHENE COMPOUND PE-4702 PX1001A CLEAR PLASTISOL

ES0165 NPT CLEAR FLOCKING COMPOUND

PC WHITE COMPOUND III RED TO CLEAR THERMO

6704-A POTTING COMPOUND, PART A DBX4006E CLEAR

MB2560 NRP Eraser Compound 10000PFXBB EPIC BRITTLE CLEAR

GSDI CLEAR TESTING COMPOUND

PM0771 R-771 CLEAR MOLDING COMPOUND

LX-W-1308 B MOLDING COMPOUND XDW56679A WINCRAFT CLEAR BASE

High Performance Clear Thermoplastics Elastomer - White Paper Development and application of SBC compounds to offer good economics and formulation flexibility meeting the end use performance requirements