https://www.avient.com/sites/default/files/2021-06/edgetek-et8900-cr-processing-guide.pdf
DRYING CONDITIONS ENGLISH (°F) METRIC (°C) Temperature 180°F 80°C Duration 2–4 Hours Moisture Level Allowable 0.05%–0.20% PROCESSING Screw Speed Typical screw speeds are recommended Injection Velocity 1–3 inch per second Back Pressure Lower back pressure is recommended Pack Pressure 60–80% of max injection pressure Hold Pressure 40–60% of max injection pressure Cool Time 10–30 seconds (depends on part geometry and dimensional stability) Residence Time Longer residence times are not advised 1.844.4AVIENT www.avient.com Copyright © 2021, Avient Corporation.
https://www.avient.com/sites/default/files/2020-09/oncap-anti-fog-product-bulletin.pdf
These anti-fog additives are a cost-efficient means of minimizing condensation from forming on polyolefin films used to pack perishable fresh foods.
https://www.avient.com/sites/default/files/2021-06/maxxam-fr-battery-pack-case-study-one-pager.pdf
https://www.avient.com/sites/default/files/2022-11/Packaging Anti-fog Whitepaper.pdf
This fog can form at any one of the various stages in the transport and storage of the product, from the moment it is put in the pack, to the time that it is put on the shelf or in the refrigerator at home.
Anti-fog additives are a cost-efficient means of maintaining the high optical qualities of polyolefin films used to pack perishable fresh foods.
https://www.avient.com/sites/default/files/2021-04/maxxam-polyolefins-formualtions-case-study.pdf
As a core part of the HVAC system, the door flap is situated close to a set of brush motors, which are packed with copper wires.
https://www.avient.com/sites/default/files/2023-01/Revolve Tripod Case Study.pdf
With a rolled storage size of just 7" x 6" (18 x 15 cm), the Revolve packs up at one-third of the size of traditional tripod designs.
https://www.avient.com/sites/default/files/2021-04/trilliant-hc-conductive-pipette-case-study.pdf
THE IMPACT For the manufacturer, Trilliant™ HC specialty engineered materials provided a number of advantages that contributed to the success of the new product line: • Reduced Cycle Time: The high flow properties of the Trilliant HC formulation allowed the manufacturer to produce warp-free parts that require less packing and cooling time, resulting in a 40% cycle time reduction. • Increased Production: Additionally, the high flow properties of the Trilliant HC formulation allowed for an increase in the number of cavities in the mold, resulting in a machine cost-per-part savings of over 30%. • Reduced Scrap Rate: The consistent conductivity, improved warp resistance, reduced flash, and improved durability provided by the Trilliant HC formulation meant less breakage, fewer rejects and a 40% reduction in scrap rate. • Total Manufacturing Cost Savings: Despite an increase I price per pound over the competition, the manufacturer’s total cash costs were reduced by over $45,000 on an annualized basis as a result of the proven, quantified savings in cycle time, productivity and scrap.
https://www.avient.com/sites/default/files/2020-11/2020-trilliant-hc8910-hc8920-processing-guide.pdf
Drying Conditions English (°F) Metric (°C) Temperature 180°F 80°C Duration 2-4 Hours Moisture Level Allowable 0.05%–0.20% Processing Screw Speed Typical screw speeds are recommended Back Pressure Lower back pressure is recommended Pack Pressure 60 - 80% of max injection pressure Hold Pressure 40 - 60% of max injection pressure Cool Time 10 - 30 seconds (depends on part geometry and dimensional stability) www.avient.com Copyright © 2020, Avient Corporation.
https://www.avient.com/sites/default/files/2022-06/CAI Animal Free Additives Product Bulletin.pdf
Cesa™ No-fog Additives & OnCap™ Anti-fogging Additives Minimizing the negative effect of condensation on the film surface is one of the key needs during the food packing process and on the shelf.
https://www.avient.com/sites/default/files/2020-12/firecon-cpe-a-processing-guide.pdf
EXTRUDER Screw 1" to 6" deep flighted metering screw 3:1 compression ratio Tooling Tubing type – zero land (for smaller sizes) Pressure type – for 1" size or larger Die Tubing type – low DDR Pressure type – short land L/D 24:1 or higher Screen Pack 20/40/20 Mesh Cooling Trough 120–150 °F (50–65 °C) recommended Dryer Hot air or desiccant type, 4 hours at 175–185 °F PROCESSING Temperature Wire Preheat None Feed Zones 290–300 °F Transition 320–340 °F Metering 340–350 °F Head/Die 350–365 °F Target Melt 350–365 °F Maximum Melt 390 °F Purge Compound HDPE www.avient.com Copyright © 2020, Avient Corporation.