As a United States based company with global business operations, Avient is committed to observing the standards of conduct set forth in the U.S. There should be no membership or attendance in a trade association or standards setting organization unless there is a defined legitimate benefit. Third, whatever the setting, never discuss prices, terms of sale, output levels, or allocating customers or markets with any competitor.

Consequently, you should not consider any such list to be a complete set of all potential risks or uncertainties. Our Board sets the appropriate “tone at the top” when it comes to risk tolerance and management. Other than as set forth above, no other changes were made to non-employee Director compensation.

We recognize that there are many different organizations that have set forth international human rights principles, such as the Universal Declaration of Human Rights and The International Labor Organization’s (ILO) Declaration on Fundamental Principles and Rights at Work. Regular engagement with these key stakeholders builds positive community relations, sets the expectation for open dialogue related to the effectiveness of our policy implementation, and assists with preparedness and collaboration in the event of an issue in our operations in that community. Our disclosures are located at: https://www.avient.com/company/policies-and-governance/ca-transparency-act-disclosure https://www.avient.com/company/policies-and-governance/europe-modern-slavery-and- human-traffickingstatement We reinforce Our Commitment to human rights, as set forth above, throughout our organization by incorporating and reflecting these principles in organizational policies, training programs, and our governance management framework.

We recognize that there are many different organizations that have set forth international human rights principles, such as the Universal Declaration of Human Rights and The International Labor Organization’s (ILO) Declaration on Fundamental Principles and Rights at Work. Regular engagement with these key stakeholders builds positive community relations, sets the expectation for open dialogue related to the effectiveness of our policy implementation, and assists with preparedness and collaboration in the event of an issue in our operations in that community. Our disclosures are located at: https://www.avient.com/company/policies-and-governance/ca-transparency-act-disclosure https://www.avient.com/sites/default/files/2025- 06/CM%20Europe%20Ltd%20Modern_Slavery_Statement_2025.pdf We reinforce Our Commitment to human rights, as set forth above, throughout our organization by incorporating and reflecting these principles in organizational policies, training programs, and our governance management framework.

GUIDELINES FOR USING CESA CLEAN ADDITIVES • Cesa Clean works best when molded maintaining normal (injection) pressure/shear • For best results, Avient recommends a “Running Color Change” which eliminates breaks in the molding cycle • Since the Cesa Clean concentrate will expand, it is recommended to reduce the shot size by 20% • It is designed for use at a let-down ratio (LDR) of 3.0% or (33:1); however, use rate can vary depending on the severity of the contamination but typically is 2.0–4.0% (a use rate higher than 6.0% may not have any positive affect on the cleaning performance) • Using Cesa Clean as a routine part of your color change rotation will allow faster changes and consume a minimal amount of raw material - Note: If the manifold is not cleaned routinely, this process may be more time consuming and additional material will be required • It is best to process at your normal polymer processing temperatures - For best performance, stock temperature should be at least 400°F - If 400°F is achieved during the purging process, no additional activation will occur during the reprocessing of regrind - All parts produced during the “Running Purge Cycle” should be captured as regrind, resulting in a scrap-free color change - If using sequential gates, open and close all gates at the same time while purging the tool - If contamination appears to be coming from one gate, open and close first, and for an extended period of time, to force more material through this location - When cleaning in this manner, pay close attention to shot size - Parts containing the previous or new color plus any Cesa Clean can be used as regrind INTRODUCING CESA CLEAN TO YOUR PROCESS Hand Blend • Hand weigh enough of the Cesa Clean and natural resin mix to equate to 3–5 times the barrel capacity • Use rate should be 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • Note: Do not attempt to vacuum load more than 15 feet from source as stratification/separation may occur Volumetric Feeder • Calibrate feeder to dispense 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • This style of feeder is highly recommended for at-the-throat metering of Cesa Clean Blending Units Most blenders have an extra bin for an additive • Fill the additive bin with Cesa Clean • Set blender to introduce the Cesa Clean at 2.0 to 4.0% • Note: Do not air convey any further than 15 feet as Cesa Clean has a high density and may separate from the mix. GETTING STARTED TIMING IS THE KEY TO A RUNNING COLOR CHANGE Hand Blend • Have the purge blend ready to load • If hopper contains a mixture of resin, color and/ or regrind, it should be run dry or drained before beginning the color change, keeping the screw full so press cycle continues • Run the main resin hopper dry or shut off hopper to hand feed at the throat • Once press is clean, slide hopper in place and proceed with next color-resin blend • The next color can be added while Cesa Clean is still in the barrel • When splay is no longer visible in parts, reset shot size, parts should be ready to pack (Single) Volumetric/Gravimetric Metering Unit at the Throat • Empty and clean feeder while press continues to run • Add Cesa Clean to the feeder color hopper and calibrate to a 3.0% use rate • When press is clean, start next color • When splay is no longer visible in parts, reset shot size, parts should be ready to pack • Note: If an open/unused secondary feeder is installed, use it for the Cesa Clean concentrate Central Blending Unit • Thoroughly clean unit while continuing to mold parts, keeping a resin feed to the press • Using a clean open hopper or regrind hopper, add the Cesa Clean concentrate • Set blender for additive/color to 3.0% • Once press is clean, drain hopper and/or central blending unit while continuing to mold parts • Begin new color and continue to mold parts • When splay is no longer visible in parts, reset shot size, parts should be ready to pack Process Adjustments That Can Help • Increase back pressure • Increase screw speed • Increase injection speed (in some tools maximum injection speed can facilitate cleaning) • Reduce mold close time (faster cycle) • Always remember a stock temperature of 400°F is essential When press and tool are clean, return all settings to standard production process profile.

Because they feature low compression set, good stress relaxation, and chemical compatibility with common substrates. ONFLEX™ HT ONFLEX™ AF 7210 ONFLEX™ S KA ONFLEX™ S KG Applications Fasteners/ Clips Fasteners/ Clips Fasteners/ Clips Fasteners/ Clips Defining Characteristic High temperature sealing performance Ambient temperature sealing performance High temperature sealing performance Ambient temperature sealing performance Density 1.00 g/ml 0.99 g/ml 1.10 g/ml 1.13 g/ml Physical Properties Tensile Strength 6.0–10.0 MPa 5.0–11.5 MPa 3.0–7.5 MPa 2.6–4.9 MPa Tear Resistance 25.0–37.0 kN/m 21.0–43.0 kN/m 17.0–46.0 kN/m 16.0–29.0 kN/m Compression Set 73°F (23°C) 72hrs 12–27% 16–32% 13–23% 31–35% 158°F (70°C) 22hrs 28–44% 32–43% 29–38% 62–66% 212°F (100°C) 22hrs 45–53% 56–60% 54–57% 80–85% Hardness 40–80 Shore A 40–80 Shore A 40–80 Shore A 40–80 Shore A Overmolding Substrate Polypropylene/ Polyethylene Polypropylene Polyamide Polyamide Processing Injection Molding/ Extrusion Injection Molding/ Extrusion Injection Molding/ Extrusion Injection Molding/ Extrusion HOW GLS TPEs MAKE THE DIFFERENCE IN AUTOMOTIVE FASTENERS AND CLIPS • Low compression set – coupled with good stress relaxation, our automotive TPEs are designed to maintain a good seal over time and reduce noise generated by vibration • High temperature performance – Avient automotive TPEs provide good sealing performance in temperatures up to 100°C/212°F • Bonding performance - strong chemical bond to polypropylene, polyethylene, and polyamide • Process flexibility - grades can be both injection molded and extruded • Easy to color - can be colored at the machine • Reduced production steps - some grades do not require pre-drying • Low VOC/FOG - OnFlex HT™ has been externally tested to VDA 278 and is proven to help satisfy vehicle interior air quality (VIAQ) regulatory requirements • Single source supply – we can streamline your supply chain with the ability to provide polymer colorants, engineered thermoplastics, and thermoplastic elastomers from a single source • Global support - we provide production, technical, and commercial support in locations convenient to your operations, including North America, Europe, and Asia To learn more about GLS TPEs for automotive applications, visit www.avient.com or call +1.844.4AVIENT (1.844.428.4368). www.avient.com Copyright © 2020, Avient Corporation.

STANDING APART FROM THE COMPETITION HOW DO MY CMF CHOICES SET ME APART FROM COMPETITORS? Finding a color, material and finish that catches the eye and sets you apart from your competition is vital. DESIGN MOTIVATES D E S I G N I L LU M I N AT E S VISUALIZING COLOR, MATERIAL & FINISH SELECTION WE’VE DEVELOPED A TOOL THAT ALLOWS YOU TO SET THE CRITICAL FACTORS FOR YOUR PROJECT, ALLOWING YOU TO MAKE INTELLIGENT CMF DECISIONS AND ACCELERATE DEVELOPMENT.

目标和范围：先确定目标和范围，可确保您计算碳足迹时的参考目标与所做出的可持续发展承诺相一致。

The mold consists of two sets of cavities. One set molds the substrate and the other molds the overmolding material. In the first step, the first barrel fills the substrate set of cavities.

The formulation of ECCOH XL 8001 has been optimized so that, when used in combination with the catalyst, ambient curing can be accomplished in a short time, with the material exhibiting very good Hot Set Test values. The material adds value to this insulation in myriad ways: • Good flame retardancy with low smoke, toxicity & corrosiveness • Excellent mechanical properties • Good surface smoothness • Ambient moisture curing with good Hot Set Test • Very good electrical properties Manufacturing of cable insulation with ECCOH XL 8001 is done using silane chemical crosslinking.