TECHNICAL BULLETIN ColorMatrix™ Joule™ RHB Fast Reheat Dispersions Handling and Usage ColorMatrix™ Joule™ dispersion fast reheat products are intended for use in PET (bottle polymer) production processes in the manufacturing of CSD 0.82IV reheat polymers and are used successfully throughout the world on all types of PET production technologies. The product is not stabilized during the manufacturing process and over time will separate so on receipt an initial re-homogenation process must be followed. At manufacturing the product has been milled and dispersed.

Support services include: • New product trial support • On-site product and equipment training programs • Issue troubleshooting • Best practice production process and maintenance reviews • Equipment selection guidance • Process reporting • Inventory management support • Equipment housekeeping There are extensive requirements governing polymer based products, from chemical legislation imposing requirements on the manufacture, marketing and use of the initial raw materials to compositional and good manufacturing practice requirements for the finished materials. Manufacturers operating lean manufacturing systems can also benefit by driving down inventory requirements even further • Avient’s advanced liquid systems can be run at lower temperatures whilst maintaining stability allowing important energy cost and carbon footprint savings to be made LIQUID COLOR SERVICE PACKAGE Avient is dedicated to supporting its customers with a full package of support services to ensure optimum value from our advanced colorant and additive technologies. Technical Support Services A team of technical service engineers are located globally to provide full training and manufacturing support.

Support services include: • New product trial support • On-site product and equipment training programs • Issue troubleshooting • Best practice production process and maintenance reviews • Equipment selection guidance • Process reporting • Inventory management support • Equipment housekeeping There are extensive requirements governing polymer based products, from chemical legislation imposing requirements on the manufacture, marketing and use of the initial raw materials to compositional and good manufacturing practice requirements for the finished materials. Manufacturers operating lean manufacturing systems can also benefit by driving down inventory requirements even further • Avient’s advanced liquid systems can be run at lower temperatures whilst maintaining stability allowing important energy cost and carbon footprint savings to be made LIQUID COLOR SERVICE PACKAGE Avient is dedicated to supporting its customers with a full package of support services to ensure optimum value from our advanced colorant and additive technologies. Technical Support Services A team of technical service engineers are located globally to provide full training and manufacturing support.

These materials provide consistent conductivity at any location on the pipette tip, as well as from manufacturing run to manufacturing run. Working together, we can help you arrive at an optimal solution with speed and accuracy, while helping to lower product development and manufacturing costs.

With faster material lead times, manufacturers of 5th generation (5G) antennas can qualify designs faster and meet the demands of rapidly deploying 5G infrastructures. Small Part Manufacturing Capabilities – Thermoplastics can be molded into smaller parts, whereas the manufacturing process of traditionally used materials limits this capability.

KEY CHARACTERISTICS • Manufactured at four ISO 13485 certified sites, providing global consistency and increased security of supply • Documented change control beyond CAS number, reducing risk of change • Available as additive concentrates, ready-to-use additive formulations or ready-to-use additive/ colorant formulations for different polymers REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Drug Master File (Type III) and/or Device Master File • Food contact established with FDA/EU* APPLICATION BULLETIN * FDA/EU compliance information available upon request; exceptions may occur Healthcare use limitations apply—see below. It is the responsibility of the medical device manufacturer and the person placing the medical device on the market to ensure compliance of the medical device with all applicable laws and regulations, including the suitability of all raw materials and components used for its manufacture.

Formulations are heavy metal-free and manufactured using state-of-the- art pigment dispersion techniques that improve homogenization and color distribution. KEY CHARACTERISTICS • Consistent coloring and improved homogenization with the polymer for more efficient processing and waste reduction • Opaque PSU/PES/PPSU masterbatches available with shorter lead times in a range of readily available standard colors • Minimum order quantities as low as 5kg (10lbs) for improved inventory control • Robust colorant formulations mean zero disruption to existing molding processes, allowing manufacturers to bring products to market faster and without investing in new machinery PRODUCT BULLETIN 1.844.4AVIENT www.avient.com Product Code Color LDR* Pantone No.** 650.00 Black 10% 433C 650.01 Brown 10% 7615C 650.02 Red 10% 186C 650.03 Orange 5% 1495C 650.04 Yellow 10% 142C 650.05 Green 10% 2248C 650.06 Blue 10% 278C 650.07 Violet 20% 2073C 650.08 Grey 10% Cool Gray 7C 650.09 White 10% RAL9010 PPSU RESINS Product Code Color LDR* Pantone No.** 660.00 Black 6% Black 6C 660.01 Brown 6% 7582C 660.02 Red 8% 7620C 660.03 Orange 6% 1505C 660.04 Yellow 6% 124C 660.05 Green 6% 348C 660.06 Blue 6% 660C 660.07 Violet 15% 7664C 660.08 Grey 6% Cool Gray 8C 660.09 White 6% RAL9010 PSU RESINS Product Code Color RAL No.* S837.0 Black 9005 S837.1 Brown 8011 S837.2 Red 3002 S837.3 Orange 2004 S837.4 Light Yellow 1016 S837.5 Green 6032 S837.6 Blue 5015 S837.7 Violet 4005 S837.8 Grey 7037 S837.9 White 9016 PES RESINS Copyright © 2021, Avient Corporation. FEATURES AND COLORS PSU, PES and PPSU masterbatches are manufactured using 100% prime virgin resin.

Enhance supply chain flexibility – Unlike silicone, which is limited by a complex silica mining supply chain and manufactured in silicone-only factories, Avient TPEs can be processed by any injection molding manufacturer. Reduce overall costs – Versaflex CE 3320-70 has lower manufacturing and total part costs compared to silicone.

Manufacturer DuPont™. NOMEX® META-ARAMID DATA META-ARAMID (HM) BARE FIBER PERFORMANCE * Equilibrium moisture regain @ 55% RH ** Creep @ 40%-58% ultimate tensile strength *** Shrinkage in dry air @ 177 C for 30 minutes MOVING HIGH PERFORMANCE FIBERS FORWARD ABOUT FIBER-LINE® LOCATIONS Headquarters, R&D, Manufacturing FIBER-LINE® LLC 3050 Campus Drive Hatfield, PA 19440 +1 215.997.9181 fiber@fiber-line.com Manufacturing Operations FIBER-LINE® LLC 280 Performance Drive SE Hickory, NC 28602 +1 828.326.8700 fiber@fiber-line.com EMEA & Asia Pacific Operations FIBER-LINE® INTERNATIONAL B.V.

Manufacturer Gunei Chemical Industry Co. MOVING HIGH PERFORMANCE FIBERS FORWARD LOCATIONS Headquarters, R&D, Manufacturing FIBER-LINE® LLC 3050 Campus Drive Hatfield, PA 19440 +1 215.997.9181 fiber@fiber-line.com Manufacturing Operations FIBER-LINE® LLC 280 Performance Drive SE Hickory, NC 28602 +1 828.326.8700 fiber@fiber-line.com EMEA & Asia Pacific Operations FIBER-LINE® INTERNATIONAL B.V.