Maxxam FR formulations are an ideal choice for a variety of applications which require specific flame retardant performance in a wide range of industries including consumer, electrical and electronic, transportation, industrial equipment and medical devices. KEY CHARACTERISTICS • UL 94 V-2, V-0, 5VA ratings and elevated RTI ratings • GWFI (IEC 60695-11-10) up to 960°C • Comparative Tracking Index (CTI) PLC 0, 600V ratings • Injection molding and extrusion grades • Non-halogen grades available • Low dielectric performance with selected formulations • Good recyclability • Colorable MARKETS & APPLICATIONS Applications that require flame retardant performance including: • Transportation: Interior components, seat components, door panels, aircraft interiors, railway interiors, boat interiors • Construction & Building Materials: Cable insulation, pipes and fittings, insulation materials • Consumer – Appliance casings, housings, covers, fume hoods, battery packages, furniture • Industrial Equipment: Machine housings • Energy, Electrical & Electronic, E-Mobility: Battery frames, electrical housings, connectors • Telecommunication: Cable management • Packaging: Transportation of sensitive goods • Healthcare: Medical device housings and components PRODUCT BULLETIN MAXXAM FR FLAME RETARDANT POLYOLEFIN FORMULATIONS Non-halogenated Halogenated PP Homopolymer Copolymer Homopolymer Copolymer Unit Unfilled Glass Fiber Mineral Unfilled Glass Fiber Mineral Unfilled Glass Fiber Mineral Unfilled Glass Fiber Mineral Characteristic Talcum Talcum Talcum Talcum Reinforcement Mass-% 0 5–30 5–30 0 20–30 5-20 0 5–30 5–20 0 5–30 5–20 Colorable – ++ ++ + ++ ++ + + + + + + + Density g/cm3 0,9–1,08 1,28–1,37 0,98–1,55 0,92–1,06 1,25–1,35 0,95–1,28 0,94–1,04 1,3–1,55 1,01–1,42 0,96–1,01 0,94–1,58 0,95–1,46 Tensile Strength MPa 25–30 30–70 25–35 16–22 40–65 15–25 25-–35 30–70 25–35 20–24 20–55 -25 E-Modulus (Tensile) MPa 1600–2500 2500–8200 2500–4000 800–1200 2000–8000 1600–3000 1300–2000 3000–8900 1900–3500 1000–1400 1200–7500 1500–3000 Izod Impact 23°C notched % 2,0–4,5 3,5–7,5 2,5–4,5 5–40 2,5–18 2,5–6 2,5–4,5 3,5–6,0 3,0–7,0 4,0–40 2,5–16 2,5–10 Max. Some of the information arises from laboratory work with small-scale equipment which may not provide a reliable indication of performance or properties obtained or obtainable on larger-scale equipment.

These solutions provide a well-controlled laser transmission rate and weld width, excellent welding strength, and gas tight weld line without weld flash. KEY CHARACTERISTICS • Part design freedom • Reduced tooling cost • Controlled laser transmission rate and weld width • Minimum heat affected zone • Gas tight weld line with no weld flash • Multiple color options MARKETS & APPLICATIONS Bergamid Laser Welding Solutions can meet the demanding technical requirements of laser welding for a range of markets & applications, including: • Automotive • Medical Devices • Consumer Goods • Houseware Applications PRODUCT BULLETIN www.avient.com Copyright © 2022, Avient Corporation. Some of the information arises from laboratory work with small-scale equipment which may not provide a reliable indication of performance or properties obtained or obtainable on larger-scale equipment.

The new Edgetek materials solutions can be wildly applied in a range of key industries including 5G base stations, medical devices, consumer electronics and more. This technology also provides the opportunity to support future applications to enhance the communication quality for 5G construction. Some of the information arises from laboratory work with small-scale equipment which may not provide a reliable indication of performance or properties obtained or obtainable on larger-scale equipment.

COLORANT DISPERSIONS RUBBER COLORANT DISPERSIONS Stan-Tone™ MB/MC & EP Stan-Tone™ MB/MC & EP are pigment dispersions for rubber systems, available in customizable binder systems suited for nitrile, EPR, EPDM, SBR, natural rubber, CPE and EVA compounds Applications: industrial goods, auto mats, rubber flooring, sponge rubber, wire and cable URETHANE COLORANT DISPERSIONS Polyester Urethane Paste Colorants: Stan-Tone™ PEP Stan-Tone™ PEP colorants are reactive and compatible with polyester systems, reacting to become part of the final cured product Applications: cast urethane wheels, industrial rollers, rigid foams, adhesives, laminates, pultrusion, glass reinforced composites, coated fabrics Polyether Urethane Paste Colorants: Stan-Tone™ ET Stan-Tone™ ET colorants for urethane are compatible with polyether systems, reacting to become part of the final cured product Applications: flexible foam, cast-able rolls and wheels, adhesives and laminates EPOXY COLORANT DISPERSIONS Stan-Tone™ EPX Stan-Tone™ EPX consists of selected pigments dispersed in a Bisphenol A undiluted epoxy resin with an epoxide equivalent of 185 Applications: protective coatings, adhesives, epoxy flooring, electrical potting and laminates VINYL COLORANT DISPERSIONS Stan-Tone™ VC & VCP Stan-Tone™ VC and VCP are products based on single pigment or multi-pigment blends and are designed for applications in which dispersion, uniformity, compatibility and cleanliness are essential Applications: profile extrusions, decking, outdoor furniture, calendaring applications Plasticizer-Based Colorants for Vinyl Paste: Stan-Tone™ HCC Stan-Tone™ HCC dispersions consist of selected pigments dispersed in diisodecyl phthalate plasticizer (DIDP) and are designed for applications in which dispersion, uniformity, compatibility and cleanliness are essential Applications: coated fabric, vinyl sealants, adhesives, wall coverings, toys and sporting goods SILICONE COLORANT DISPERSIONS Liquid Silicone Colorants: Silcopas™ Stan-Tone™ SP or FSP (FDA-compliant) Silcotec™ SL Stan-Tone™ HC Plus LSR (class VI certified) Silicone paste colorants are single pigment or custom- made dispersions using a silicone carrier specially developed for liquid silicone rubber (LSR) injection molding applications Applications: infant care, toys, seals, gaskets and medical equipment High Consistency Silicone Rubber Colorants: Silcogum™ Silcotec™ S Stan-Tone™ SMB Stan-Tone™ HC Plus HCR (class VI certified) Silicone rubber colorants are made with a silicone elastomer gum binder resulting in cuttable masterbatches or slabs for ease of handling, especially for 2-roll, open-mill mixing Applications: mechanical seals, keypads, gaskets, wire and cable jacketing Room Temperature Vulcanization Colorants: Silcopas™ RTV and Stan-Tone™ SP Silcopas™ RTV and Stan-Tone™ SP colorants offer a standard line of single pigment or custom made dispersions using a low viscosity dimethyl fluid specially developed for room temperature vulcanization (RTV) rubber Applications: caulks, sealants, adhesives WATER-BASED COLORANT DISPERSIONS Water-Based Liquid Colorants: Stan-Tone™ WDN Stan-Tone™ WDN water dispersions are high-solids organic or inorganic pigment dispersions designed to help meet standards for dispersion including pH levels and strength and shade Applications: dipped latex balloons and gloves, coatings and adhesive systems ADDITIVE AQUEOUS ADDITIVE DISPERSIONS Aquamix™ Aquamix™ chemical dispersions are a full line of dispersed and emulsified curatives, antioxidants, fillers, vulcanizers, optical brighteners, flame retardants, UV stabilizers and tackifiers Applications: adhesives and latex compounding, curatives SILICONE ADDITIVE DISPERSIONS Electrically Conductive Additives for Silicone: Silcosperse™ EC Silcosperse™ EC electrically conductive additives provide high conductivity and lower filler loadings Applications: resistors, printable electronics, flexible electronics, insulator depolarizers Laser Marking Additives for Silicone: Silcosperse™ LM Silcosperse™ LM laser marking additives are dispersions that contain laser absorbers and color formers that eliminate the need for secondary etching Applications: medical device housings, electronic device housings, wire and cable jacketing Peroxide Additives for Silicone: Silcocat™ Silcocat™ dispersions can improve silicone molding process by stabilizing silicone peroxide compound levels Applications: automotive hoses, seals, gaskets Heat Stabilizer Additives for Silicone: Silcosperse™ The Silcosperse™ family of heat stabilizing additives provide a high quality dispersion into silicone designed to enhance heat resistance of silicone compounds Mold Release Additives for Silicone: Silcosperse™ IMR Silcosperse™ IMR is an internal mold release dispersion designed to be added to the silicone or fluorosilicone compound to facilitate the de-molding of finished parts Acid Acceptor Additives for Silicone: Silcosperse™ 180 Silcosperse™ 180 acid acceptor is a premium dispersion used to neutralize acid by-products generated by certain peroxides Viscosity Modifiers for Silicone: Silcosperse™ 237 Silcosperse™ 237 modifier dispersions are designed to raise or control the viscosity without changing solid content SPECIALTY PRODUCTS DRY POWDER COLORANTS Stan-Tone™ D and Stan-Tone™ DC Stan-Tone™ D and Stan-Tone™ DC are dry powder pigments available in a range of hues and chemical types WET OR DRY BLEND COLORANTS Stan-Tone™ DB Stan-Tone™ DB dry blend colorants provide enhanced performance over dry colors, resulting in uniform critical pigment weight ratios for improved color control SELF-BONDING SILICONE Silcotec™ SCB Silcotec™ SCB self-bonding silicone solutions allow silicone to bond to various substrates without prime coating To learn more about our colorant & additive dispersions, please contact us at +1.844.4AVIENT (1.844.428.4368) or visit www.avient.com. Some of the information arises from laboratory work with small-scale equipment which may not provide a reliable indication of performance or properties obtained or obtainable on larger-scale equipment. Some of the information arises from laboratory work with small-scale equipment which may not provide a reliable indication of performance or properties obtained or obtainable on larger-scale equipment.

Formulated a solution that met rigorous medical application requirements • Leveraged global footprint to ensure supply continuity • Increased process efficiency by replacing previous thermoset material with TPE LEARN MORE https://www.avient.com/products/thermoplastic-elastomers/dynaflex-thermoplastic-elastomers

2 /Ju n- 20 19 /V er si on 1 .0 Certificate Avient Colorants Singapore Pte Ltd 8 Third Chin Bee Road Jurong Industrial Estate 618684 Singapore Singapore Scope Administration, Site management, Manufacture, Laboratory, Procurement, Maintenance, infrastructure, Warehouse and Transport Normative base EN ISO 13485:2016 Medical devices – Quality Management System Reg. no. 45483 Validity 01. 03. 2022  – 28. 02. 2025 Issue 01. 03. 2022  A.Grisard, President SQS F.

Mevopur Healthcare Functional Additives Medical Devices Application Bulletin_CN12.15-2

Some of the information arises from laboratory work with small-scale equipment which may not provide a reliable indication of performance or properties obtained or obtainable on larger-scale equipment. KEY CHARACTERISTICS • Eliminates secondary coating operations • Easily delivers the last drop out of a container • Reduces residual content • Reduces production costs • Won’t impact visual clarity • Non-PFAS formulations available APPLICATIONS Cesa Low Retention Additives are suitable for any olefinic application that would benefit from the ability to repel water or fluids, including: • Labware, including pipette tips • Monofilaments • Industrial fixtures • Woven fibers • Platform mats • Molded optical lenses • Medical devices • Extruded films • Carpet fibers • Textiles PRODUCT BULLETIN

The two companies also entered into a supply agreement, whereby Kraton will provide such as packaging, medical devices and personal care products.   is a premier provider of specialized polymer materials, services and solutions.

The two companies also entered into a supply agreement, whereby Kraton will provide  such as packaging, medical devices and personal care products.   is a premier provider of specialized polymer materials, services and solutions.