EXTRUDER Screw 1" to 6" deep flighted metering screw 3:1 compression ratio Tooling Tubing type – zero land (for smaller sizes) Pressure type – for 1" size or larger Die Tubing type – low DDR Pressure type – short land L/D 24:1 or higher Screen Pack 20/40/20 Mesh Cooling Trough 120–150 °F (50–65 °C) recommended Dryer Hot air or desiccant type, 4 hours at 175–185 °F PROCESSING Temperature Wire Preheat None Feed Zones 290–300 °F Transition 320–340 °F Metering 340–350 °F Head/Die 350–365 °F Target Melt 350–365 °F Maximum Melt 390 °F Purge Compound HDPE www.avient.com Copyright © 2020, Avient Corporation.

Caribbean EM53820027 15 Units/Case Tahoe EM54820023 Mauve EM43820003 Jade EM62820015 Midnight EM54820025 Light Aqua EM53820046 Tropical EM53820024 *Not shown Sunset Red, EM34820002, 10 Units/Case For more inspiring color ideas, visit mesaconstructioncolors.com Copyright © 2022, Avient Corporation.

Certified since 06 September 2008 Jonathan Hall Global Head - Certification Services Authorised by SGS United Kingdom Ltd Rossmore Business Park, Ellesmere Port, Cheshire, CH65 3EN, UK t +44 (0)151 350-6666 - www.sgs.com https://www.sgs.com/en/terms-and-conditions/

CB is also available as a European food regulation compliant grade. 0 10 20 30 40 50 60 70 1.00E+18 1.00E+16 1.00E+14 1.00E+12 1.00E+10 1.00E+08 1.00E+06 1.00E+04 1.00E+02 1.00E+00 INSULATIVE ANTISTAT DISSIPATIVE CONDUCTIVE KEY CHARACTERISTICS • Delivers a range of properties from anti-static through conductive • Achieves greater conductivity levels with lower loadings in single- and multi-wall nanotubes • Anti-static performance available at lower doses • Dark color options, such as browns, blues or reds, available at lower dosages in single-wall nanotubes • Suitable for peroxide- or platinum-cured silicone formulations MARKETS AND APPLICATIONS Silcosperse EC Electrically Conductive additive dispersions are found in a variety of markets, including transportation, energy, electrical & electronics, and the films & coatings industry.

KEY CHARACTERISTICS • Manufactured at four ISO 13485 certified sites, providing global consistency and increased security of supply • Documented change control beyond CAS number level, reducing risk of change • Non-phthalate and formulated without animal-derived substances • Different tones of amber available on request —more or less red or yellow and/or lighter or darker • Also available in liquid form REGULATORY SUPPORT • Pre-tested raw materials: - ISO 10993-1 and USP parts (Class VI) - European Pharmacopeia, monograph 3.1.15, USP and elemental analysis as per ICH Q3D - USP criteria appearance of solution, color • Registered Drug Master File (Type III) by the FDA • Food contact compliance established with FDA/EU* • YBB00102002-2015 (oral liquid pharmaceutical PET bottles) compliance support APPLICATION BULLETIN * FDA/EU compliance information available upon request Healthcare use limitations apply—see below.

COLOR RAL REFERENCE COLOR RAL REFERENCE 1015 Brown/12 6026 Green/14 1034 Yellow/14 6032 Green/20 1018 Yellow/19 7004 Grey/21 1003 Yellow/20 8025 Brown/14 3020 Red/15 9022 Pearl Grey/1 5005 Blue/35 9010 White/5 5000 Blue/36

COLOR RAL REFERENCE COLOR RAL REFERENCE 1015 Brown/12 6026 Green/14 1034 Yellow/14 6032 Green/20 1018 Yellow/19 7004 Grey/21 1003 Yellow/20 8025 Brown/14 3020 Red/15 9022 Pearl Grey/1 5005 Blue/35 9010 White/5 5000 Blue/36

On the Create Invoice page, fill in the mandatory fields (marked with a red asterisk) on your invoice.

680.00 Black 2% Black 3C 680.01 Brown 6% 4625C 680.02 Red 15% 7621C 680.03 Orange 6% 1595C 680.04 Yellow 6% 605C 680.05 Green 6% 7732C 680.06 Blue 10% 7697C 680.07 Violet 15% 7665C 680.08 Grey 5% 7539C 680.09 White 12% 7499C * Recommended let down ratio addition rates.

EXTRUDER Screw 1½" to 6" Polyethylene type—Maddock; 3:1 compression ratio Tooling Pressure type Die On size with 1/8" or less land L/D 24:1 or higher Screen Pack 20/60/60/20 Mesh Cooling Trough Hot 120–150° F (50–65° C) Feeder Gravimetric type—3 compartment (for color) Drying Conditions, Catalyst Only Desiccant type, 4 hours at 140° F (60° C) PROCESSING Temperature Wire Preheat 180–250° F (110–120° C) Feed Zones 330° F (165° C) Transition 340° F (170° C) Metering 350° F (177° C) Head/ Die 360° F (182° C) Target Melt 350–380° F (177–190°C) Flame at Die Tip Yes Line Speed Higher line speed improves mixing and surface smoothness Purge Compound HDPE To learn more about Syncure XLPE wire and cable solutions, contact us at +1.844.4AVIENT (1-844.428.4368) www.avient.com Copyright © 2020, Avient Corporation.