Since the FlexCart Micro has a smaller footprint for use in operations where space is limited, the metering system uses the smaller 10L (LN) polymer delivery pack. The FlexCart Micro unit, due to its smaller footprint and reduced throughput range, is designed to work with the LN molded polymer containers—specifically the 10-liter pack.

Available as liquid colorants or dry pigment packs, count on Mesa to deliver an exquisite appearance with long-lasting performance every time.

Available as liquid colorants or dry pigment packs, count on Mesa to deliver an exquisite appearance with long-lasting performance every time.

Beyond traditional marking, Colorant Chromatics™ UV Laser Marking Technology provides an ability to apply ultraviolet (UV) laser marking to FEP. The unique formulation of Colorant Chromatics UV Laser Marking Technology enables a permanent and gentle marking of the cable surface. In addition, this UV laser marking technology for FEP is melt processible and cost effective compared to current PTFE tape wiring solutions for laser marking.

CABLE MANUFACTURER A E R I A L D R O P C A B L E J A C K E T • Pass clamp test requested by end user • Strong UV resistance & mechanical performance • Excellent processing • Good fire performance to pass CPR class Cca / Dca • Low shrinkage (< 1%) • Exceeded material fire performance requirements and met all other performance criteria • Simplified supply chain with local manufacture in Europe • Enabled customer to run material at optimum processing conditions by providing support with machine set up. ECCOH™ 5978 UV formulations KEY REQUIREMENTS WHY AVIENT?

CABLE MANUFACTURER A E R I A L D R O P C A B L E J A C K E T • Pass clamp test requested by end customer • Strong UV resistance & mechanical performance • Excellent processing • Good fire performance to pass CPR class Cca / Dca • Low shrinkage (< 1%) • Exceeded material fire performance requirements and met all other performance criteria • Simplified supply chain with local manufacture in Europe • Enabled customer to run material at optimum processing conditions by providing support with machine set up ECCOH™ 5978 UV Formulation KEY REQUIREMENTS WHY AVIENT?

Screw Speed Low–moderate Injection Velocity 1–3 inch per second Back Pressure Low–moderate Pack Pressure 60–80% of max injection pressure Hold Pressure 40–60% of max injection pressure Cool Time 10–30 seconds (depends on part geometry and dimensional stability) Residence Time Long residence times are not advised 1.844.4AVIENT www.avient.com Copyright © 2022, Avient Corporation.

DRYING CONDITIONS ENGLISH (°F) METRIC (°C) Temperature 180°F 80°C Duration 2–4 Hours Moisture Level Allowable 0.05%–0.20% PROCESSING Screw Speed Typical screw speeds are recommended Injection Velocity 1–3 inch per second Back Pressure Lower back pressure is recommended Pack Pressure 60–80% of max injection pressure Hold Pressure 40–60% of max injection pressure Cool Time 10–30 seconds (depends on part geometry and dimensional stability) Residence Time Longer residence times are not advised 1.844.4AVIENT www.avient.com Copyright © 2021, Avient Corporation.

EXTRUDER Screw 1½" to 6" Polyethylene type—Maddock; 3:1 compression ratio Tooling Pressure type Die On size with 1/8" or less land L/D 24:1 or higher Screen Pack 20/60/60/20 Mesh Cooling Trough Hot 120–150° F (50–65° C) Feeder Gravimetric type—3 compartment (for color) Drying Conditions, Catalyst Only Desiccant type, 4 hours at 140° F (60° C) PROCESSING Temperature Wire Preheat 180–250° F (110–120° C) Feed Zones 330° F (165° C) Transition 340° F (170° C) Metering 350° F (177° C) Head/ Die 360° F (182° C) Target Melt 350–380° F (177–190°C) Flame at Die Tip Yes Line Speed Higher line speed improves mixing and surface smoothness Purge Compound HDPE To learn more about Syncure XLPE wire and cable solutions, contact us at +1.844.4AVIENT (1-844.428.4368) www.avient.com Copyright © 2020, Avient Corporation.