AFNOR M 2 in France, DIN 4102 B 2–B 1 in Germany, UNI 8457–9174 C 1 in Italy, BKZ 5.2 in Switzerland, BS 5852.1990 CRIB 3–5 in UK)** • Standard portfolio available for PP injection molded applications APPLICATION BULLETIN * Laboratory weathering testing may not be determinative of all conditions of use; the end user must determine suitability of a product for its intended use ** Contact us for more information on regulatory compliance Copyright © 2022, Avient Corporation.

And, because TPEs can be overmolded, brand owners and packaging manufacturers have new options for designing components that can be integrated directly into the package. 4345, 4355, 4365 4465 4570 4665 Hardness Shore A 45A, 55A, 65A 65A 70A 65A Regulatory* • EU 10/2011 Color Translucent Translucent Natural Natural Overmolding Bonds To Polypropylene Polypropylene Polar substrates Polar substrates Chemical Resistance • #1 for soaps • Low-cost solution for non-polar oils • #2 for soaps • Some oils • #1 for polar & non-polar oils • #1 for non-polar solvents, like isododecane • #2 for non-polar oils • Abrasion resistance * Regulatory compliance is offered for consideration only—limitations apply; please check with product stewardship.

All products passed the OEKO-TEX® 100-2 standard, do not include plasticizers, and contain lower VOCs than traditional adhesive solutions. KEY CHARACTERISTICS • High-wearing comfort and elastic recovery • Strong and seamless adhesion to polyester and nylon fabrics • Passed OEKO-TEX 100-2 testing • Excellent washability at up to 60°C • Non-toxic formulations with low volatile organic compounds (VOC) and without added plasticizers • Attractive alternative to conventional TPU adhesive film and glue MARKETS & APPLICATIONS Versaflex TF Adhesive TPE solutions have been custom engineered for: • Elastic strips in underwear • Seam tapes in sports and fitness apparel PRODUCT BULLETIN 1.844.4AVIENT www.avient.com Copyright © 2024, Avient Corporation.

The issuance of orders by Buyer implies full acceptance of these Terms and Conditions which shall prevail over Buyer's terms and conditions in the event they contradict or deviate from these Terms and Conditions. 2. Except to the extent attributable to the Product sold hereunder failing to meet the express warranties set forth in paragraph 2, Buyer will indemnify, defend and hold Seller harmless from all costs, expenses, damages, judgments or other loss, including costs of investigation, litigation and reasonable attorney's fees, arising out of Buyer's selection, use, sale and further processing of the Product sold hereunder. Seller may deliver to Buyer a quantity of Products with a quantity tolerance which may vary, depending upon the quantities ordered by Buyer, as follows: (1) from 50 to 99 kgs, +/- 25%; (2) from 100 to 249 kgs, +/- 15%; (3) from 250 to 499 kgs, +/- 10%; (4) more than 500 kgs, +/- 5%.

The issuance of orders by Buyer implies full acceptance of these Terms and Conditions which shall prevail over Buyer's terms and conditions in the event they contradict or deviate from these Terms and Conditions. 2. A Vevő rendeléseinek leadása együtt jár jelen Általános Szerződési Feltételek teljes elfogadásával, amelyek a Vevő szerződési feltételeit megelőzve is érvényesülnek, amennyiben azok ellentétesek vagy eltérnek a jelen Általános Szerződési Feltételektől. 2. Eladó jogosult egy adott Termékmennyiséget mennyiségi eltéréssel szállítani, ami a Vevő által megrendelt mennyiségektől függően változhat, az alábbiak szerint: (1) 50-99 kg között +/- 25 %; (2) 100-249 kg között +/- 15 %; (3) 250-499 kg között +/- 10 %; (4) 500 kg felett +/- 5 %.

TEMPERATURE Material Rear Center Front Nozzle Melt Mold Nylon 6,6 540–570 530–560 530–560 540–570 540–570 200–300 (90–150) Nylon 6,6 30% SS 540–570 530–560 530–560 540–570 540–570 200–300 (90–150) PBT 510–410 (265–280) 490–540 (255–280) 480–530 480–530 480–530 150–250 (65–120) PC 14% NiCF 540–570 540–570 530–560 530–560 530–560 150–250 (65–120) ABS 470–520 460–520 460–520 460–530 (240–275) 460–530 (240–275) 100–200 (40–90) PP 440–480 (225–250) 440–480 (225–250) 430–470 (220–245) 420–460 (215–240) 420–460 (215–240) 125–175 (50–80) DRYING Material Temperature °F (°C) Time Minimum Moisture Maximum Moisture Nylon 6,6 14% NiCF 180 (80) 4–5 hours 0.05% 0.20% Nylon 6,6 30% SS 180 (80) 4–5 hours 0.05% 0.20% PBT 14% NiCF 250 (120) 6-8 hours 0.02% 0.03% PC 14% NiCF 250 (120) 3–4 hours 0.02% 0.02% ABS 14% NiCF 200 (90) 2–4 hours 0.05% 0.10% PP 14% NiCF 180 (80) 2–4 hours 0.20% 0.30% Equipment • Feed throats smaller than 2.5" may cause bridging due to pellet size - Larger feed throats will be more advantageous with long fiber EMI shielding resins • General purpose metering screw is recommended - Mixing/barrier screws are not recommended • L/D ratio - 18:1–20:1 (40% feed, 40% transition, 20% metering) • Low compression ratio - 2:1–3:1 • Deep flights recommended - Metering zone 3.5 mm - Feed zone 7.5 mm • Check ring - Three-piece, free-flowing check ring • General purpose nozzle (large nozzle tips are recommended) - Minimum orifice diameter of 7/32" - Tapered nozzles are not recommended for long fiber EMI shielding resins • Clamp tonnage: - 2.5–5 tons/in2 Gates • Large, free-flow gating recommended - 0.25" x 0.125" land length - 0.5" gate depth Runners • Full round gate design • No sharp corners • Minimum of 0.25" diameter • Hot runners can be used PROCESSING Screw Speed Slower screw speeds are recommended to protect fiber length Back Pressure Lower back pressure is recommended to protect fiber length Pack Pressure 60–80% of max injection pressure Hold Pressure 40–60% of max injection pressure Cool Time 10–30 seconds (depends on part geometry and dimensional stability) PROCESS CONSIDERATIONS Recommended – retain fiber length (maximize conductivity) • Low shear process • Low screw speed and screw RPM • Slow Injection speed • Fill to 99–100% on first stage of injection - Reduces potential nesting of fibers at gate location - Improves mechanical performance near gate location - Promotes ideal fiber orientation Resin Rich Surface • Achieved when using a hot mold temperature and longer cure times ≥ Max mold temperature recommendation • Improved surface aesthetic • Reduced surface conductivity • Could reduce attenuation performance in an assembly Fiber Rich Surface • Achieved when using a cold mold temperature and shorter cure times ≤ Minimum mold temperature recommendation • Improved surface aesthetic • Reduced surface conductivity • Could improve attenuation performance in an assembly www.avient.com Copyright © 2020, Avient Corporation.

Dec 04, 2012 2:10 PM EST

Continuous fiber reinforced thermoplastic composite tape is slit to custom widths from 2" to 24" Enables effective package separation and improve manufacturing operations such as mold release during thermoforming and packaging pick and place operations (Chinese language version) EMI-shielding performance at frequencies from 30 MHz up to 2 GHz

2 Devlet Görevlilerine Rüşvet 2 Ticari Rüşvet 2 Kolaylaştırma Ödemeleri ve Komisyonlar 3 Temsilciler, Distribütörler ve Diğer Üçüncü Taraflarla Çalışmak 3 Durum Tespiti ve Onay Süreci 3 Uyarı İşaretleri 3 Muhasebe ve Kayıt Tutma Zorunlulukları 4 Olası İhlallerin Bildirilmesi 4 Avient Etik Yardım Hattı 4 Misillemeye Karşı Koruma 4 Hızlı Referans: ABAC YAPILACAKLAR VE YAPILMAYACAKLAR 5 1 Küresel Rüşvet ve Yolsuzluk Karşıtı Politika Avient dünyanın her yerinde tüm ticari faaliyetlerinde, sahtecilik, rüşvet ve diğer yolsuzluk uygulamalarını yasaklamıştır. Bizim Sorumluluğumuz Avient adına hareket eden tüm Avient yetkilileri, çalışanları ve üçüncü taraflar bu Politikayı anlamaktan ve bunlara uymaktan sorumludur ve her biri şu yükümlülüklere sahiptir: • Politikanın yürürlükte olan yönlerini bilmek ve bunları astlarına aktarmak • Belirli bir durumda Politikanın uygulanıp uygulanmayacağı ya da herhangi bir eylemde bulunup bulunulmayacağının açık olmaması durumunda soru sormak • Üçüncü taraflar aracılığıyla yürütülen ticari faaliyetleri düzgün şekilde yönetmek ve izlemek • Olası görevi kötüye kullanma belirtileri ya da kanıtlarına karşı uyanık olmak • Uygun olan kanallar aracılığıyla, ihlal ve şüphelenilen ihlalleri derhal bildirmek ABAC Yasaları, herhangi bir şirket veya kişinin, işi sürdürmek veya garantiye almak veya başka bir uygunsuz iş avantajı elde etmek için herhangi bir kişiye 2 değerli bir şey teklif etmesini, vaat etmesini, ödemesini veya ödemeye yetki vermesini yasa dışı hale getirir. ABAC Yasalarına uymak için, Avient adına hareket eden hiçbir çalışan veya üçüncü taraf, bu rüşvetin aşağıdaki anlamlara geleceği herhangi bir biçimdeki hediye, ağırlama veya değerli herhangi bir şeyi, doğrudan veya dolaylı olarak, kimseye teklif etmemeli veya kimseden almamalıdır: • İş almak ya da mevcut işi elde tutmak • İş kararlarını etki altına almak • Adil olmayan bir avantaj sağlamak 2 Buna herhangi bir devlet memuru ve/veya özel sektör çalışanı dahildir 2 ABAC Yasaları geniş kapsamlıdır ve çok geniş bir şekilde yorumlanabilir.

LANDSCHAFT I cHE480.567.505 Avient Colorants Switzerland AG Muttenz 2 Alle Eintragungen Ei Ae Lö Personalangaben Funktion Zeichnungsart 4 b 7m 4m 7m 6m horigef, in+irstetden Mer*leihNsrberfdeutseherStaatsangehöriger, in Kronberg (DE) rStaatsangehd'riger-in Cuxen@+U) James, Robert Kenneth, amerikanischer Staatsangehöriger, in Ohio (US) Garratt, Michael Alexander, amerikanischer Staatsangehöriger, in Luxemburg (LU) Tamura, Mauricio Massanobu, portugiesischer Staatsangehöriger, in Birsfelden Merklein, Norbert, deutscher Staatsangehöriger, in Rheinfelden l:M.des Venffattungsrates lAltgtietres Veftvattungsrates l+tgl+e#es Venffattungsrates Präsident des @ Kollektivunterschrift zu zweien Ehz ehrntersehrift Arlesheim, 02.12.2020 11:46 BM Dieser Auszug aus dem kantonalen Handelsregister hat ohne die nebenstehende Originalbeglaubigung keine Gültigkeit. Bezüglich der letzten, noch nicht publizierten Eintragung liegt die Ermächtigung des Eidgenössischen Amtes für das Handelsregister im Sinne von Art. 11 Abs. 2 HRegV vor.