Geon(TM) MP128-81 Moldable Granite NP

Geon(TM) V4085-81 Grey Plastisol

J-WHITE 81

SD 6101-81

Geon(TM) FK150-81 Gray Foam NP

Butterworth, Malaysia 81. TRIR: 0.50 2. PSIC: 0 2.

DNU Geon(TM) V1285-81 Gray Scrim Coat Plast V2017 BLACK FILTER (MD-27-70-2)

TECHNICAL BULLETIN UV RESISTANCE • UV testing: QUV-A Test, 0.68 @ 45C • Comparable results to traditional TPEs reSound OM 5510-45N reSound OM 5510-60N Bio-derived Content (%) 40% 50% Hardness, Shore A 45 60 Delta E after 150 hrs. 0.22 0.23 Delta E after 300 hrs. 1.68 0.56 AGING – BONDING STRENGTH ONTO ABS reSound OM 5520-55N Room Temperature 70C 1 day 1 week 2 weeks 6 months 1 week 2 weeks 3 weeks Bio-derived Content (%) 49% 49% 49% 49% 49% 49% 49% Hardness, Shore A 54 54 55 54 55 56 OM Substrate ABS ABS ABS ABS ABS ABS ABS OM Avg. Peel, PLI 12 19 23 20 19 reSound OM 5510 for PP reSound OM 5510-60N Room Temperature 70C 1 day 1 week 2 weeks 6 months 1 week 2 weeks 3 weeks Bio-derived Content (%) 50% 50% 50% 50% 50% 50% 50% Hardness, Shore A 60 60 60 60 60 60 60 Specific Gravity 0.89 0.89 0.89 0.89 0.89 0.89 0.90 50% Modulus, PSI 247 241 244 251 234 244 240 100% Modulus, PSI 343 333 338 339 321 331 326 Tensile Strength, PSI 625 621 647 610 633 662 642 Elongation, % 306 314 309 313 312 315 315 Tear Strength, PLI 109 108 113 113 111 117 115 reSound OM 5520-55N Room Temperature 70C 1 day 1 week 2 weeks 6 months 1 week 2 weeks 3 weeks Bio-derived Content (%) 49% 49% 49% 49% 49% 49% 49% Hardness, Shore A 54 54 55 55 54 55 56 Specific Gravity 0.95 0.95 0.96 0.96 0.95 0.96 0.96 50% Modulus, PSI 258 256 256 265 266 271 257 100% Modulus, PSI 353 355 357 362 373 379 367 Tensile strength, PSI 637 615 637 669 651 674 642 Elongation, % 319 315 319 333 313 319 315 Tear Strength, PLI 146 136 133 142 137 138 141 reSound OM 5510-45N Room Temperature 70C 1 day 1 week 2 weeks 6 months 1 week 2 weeks 3 weeks Bio-derived Content (%) 40% 40% 40% 40% 40% 40% 40% Hardness, Shore A 45 46 47 46 46 45 45 Specific Gravity 0.88 0.89 0.89 0.89 0.89 0.89 0.90 50% Modulus, PSI 153 158 154 162 137 136 133 100% Modulus, PSI 251 259 259 261 226 222 218 Tensile Strength, PSI 438 481 451 495 417 470 486 Elongation, % 215 240 211 243 204 227 238 Tear Strength, PLI 84 81 87 82 83 85 84 AGING – PROPERTY RETENTION • Tested at room temperature and 70° C for comparison • Hardness, tensile strength elongation and modulus showed great retention Overmolding onto PP Overmolding onto ABS RHEOLOGY Suitable for injection molding and overmolding 1.0 10 100 1000 10000 100000 10.0 100.0 1000.0 reSound OM 5510-30N reSound OM 5510-45N reSound OM 5510-60N reSound OM 5510-70N Shear Rate, 1/s C ap ill ar y Vi sc os it y, P a* s 1.0 10 100 1000 10000 100000 10.0 100.0 1000.0 reSound OM 5520-55N Shear Rate, 1/s C ap ill ar y Vi sc os it y, P a* s Capillary viscosity at 200°C Capillary viscosity at 200°C reSound OM 5510 for PP reSound OM 5520 for ABS www.avient.com Copyright © 2020, Avient Corporation.

Clause 2 Effect and invariability of the Clauses a. Clause 1, Clause 2, Clause 3, Clause 6, Clause 7; ii. Clause 1, Clause 2, Clause 3, Clause 6, Clause 7; ii.

ECert.pdf Page 1 of 2 Validity of this certificate is based on the successful completion of the periodic surveillance audits of the management system defined by the above scope and is contingent upon prompt,written notification to ABS Quality Evaluations, Inc. of significant changes to the management system or components thereof. IATF 16949:2016 The Quality Management System is applicable to: Certificate No: 38223 Effective Date: 03 July 2018 Expiration Date: 02 July 2021 Issue Date: 03 July 2018 IATF No: 0313794 Alex Weisselberg, President DESIGN AND COMPOUNDING OF THERMOPLASTIC PRODUCTS (WITH ADDITIONAL FACILITIES LISTED ON ATTACHED ANNEX) Certificate Of Conformance has been assessed by ABS Quality Evaluations, Inc. and found to be in conformance with the requirements set forth by: Page 2 of 2 ABS Quality Evaluations PolyOne Corporation IATF 16949:2016 Certificate Of Conformance ANNEX At Below Facilities: Validity of this certificate may be confirmed at www.abs-qe.com/cert_validation.