KEY CHARACTERISTICS • Manufactured at four ISO 13485 certified sites, providing global consistency and increased security of supply • Documented change control beyond CAS number reducing risk of change • Non-phthalate and formulated without animal- derived substances • Available for use in a wide range of polymers including polyolefins, styrenics, polycarbonate and alloys, polyester, POM • Functionality can be combined with colorants into convenient combination concentrates and ready-to-use formulations REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Drug Master File (Type III) and/or Device Master File • Food contact established with FDA/EU* APPLICATION BULLETIN * FDA/EU compliance information available upon request FUNCTIONALITY TARGET APPLICATIONS DRUG DELIVERY DEVICES SYRINGES & NEEDLES DIAGNOSTICS CATHETERS Clarifying PP Sorbitol-free for transparent applications with reduced migration and improved thermal stability     Lubricant— permanent/ non-migrating Fast acting reduction in friction for wide variety of polymers such as PP, ABS, POM, PC    Protection from UV in transparent applications for PP, PE, PETG, COP UV blocking in 290-450nm with no impact on clarity; can be combined with colors (e.g., amber)   Antistatic ready-to- use solution for PP, ABS, PC/ABS Permanent/non-migrating; fast decay time independent of % relative humidity  Gamma/e-beam sterilization protection of the polymer Preserving the properties of PP and COC/COP; reduction in yellowing using Color Compensation Technology (CCT)    Reduced material consumption/cycle time—nucleation Fast acting new generation nucleant for PE and PP; improved thermal and mechanical properties allows wall thinning; reduction of tolerance/dimensional problems between different colors    Laser marking replacing ink printing/labels Solvent-free, high-speed identification for Nd/YAG laser for PE,PP, ABS, PC, POM     Antioxidants for PE, PP, TPE Thermal protection during converting/downstream sterilization    Brand protection/ anticounterfeit Covert and non-covert systems   Healthcare use limitations apply—see below.

KEY CHARACTERISTICS • Manufactured at four ISO 13485 certified sites, providing global consistency and increased security of supply • Documented change control beyond CAS number, reducing risk of change • Non-phthalate and formulated without animal- derived substances • Available for use in a wide range of polymers including polyolefins, styrenics, polycarbonate and alloys, polyester, POM • Functionality can be combined with colorants into convenient combination concentrates or formulations REGULATORY SUPPORT • Pre-tested raw materials: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Drug Master File (Type III) • Food contact established with FDA/EU* APPLICATION BULLETIN * FDA/EU compliance information available upon request FUNCTIONALITY TARGET APPLICATIONS EBM/IBM CONTAINERS CLOSURES FILM COMBINATION DEVICES Clarifying PP Sorbitol-free—possibilities in packaging ocular solutions    Slip/torque reduction Slip for PE, PP films, processing aid, torque reduction for closures   Protection from UV in transparent packaging for PP, PE, PETG, COP UV blocking in 290–450nm with no impact on clarity    Antistatic ready-to-use solution for PE films e.g. for API handling Permanent/non-migrating; fast decay time independent of % relative humidity  Antistatic masterbatch for PE films Cost effective, long-lasting, migrating type but with biological evaluation  Gamma/e-beam sterilization protection of the polymer Preserving the properties of PP and COC/COP. Reduction in yellowing using Color Compensation Technology (CCT)   Reduced material consumption/cycle time/improved properties—nucleation Fast acting new generation nucleant for PE and PP; improved dimensional stability, thermal and mechanical properties    Laser marking replacing ink printing/labels Solvent-free, high-speed identification for Nd/YAG laser    Antiblock for PE/PP film Non-migrating additive system maintaining high gloss and printability  Antioxidants for PE, PP, TPE Thermal protection during converting/ downstream sterilization     Brand protection/ anticounterfeit Range of covert and non-covert systems    Volatiles/odor absorber for PE/PP Physical absorption of a wide range of molecules responsible for odor, VOC and potential extractables/ leachables in plastics   Healthcare use limitations apply—see below.

Syncure™ XLPE Cross-linkable Polyethylene Formulations FOR LOW VOLTAGE CABLES PRODUCT SELECTION GUIDE Syncure™ XLPE MOISTURE CROSS-LINKABLE POLYETHYLENE INSULATION FOR LOW VOLTAGE CABLE SYSTEMS SYSTEM S100FH S100FH-XUV S100FH-UV S100FV S100FV-UV S112NA S120NA S200FH S200FV Applications Building Wire, Tray Cable Building Wire, Tray Cable Photo-Voltaic (PV) Wire Building Wire, Tray Cable Building Wire, Tray Cable Building Wire, Teck-90 Pipe and Tube Building Wire, Tray Cable, Service Entrance Building Wire, Tray Cable, Service Entrance Specification UL 44 UL 44 UL 44, UL 4703 UL 44 UL 44 CSA 22.2 Suitable for NSF 61 UL 44 UL 44 Wire Type XHHW-2, RHW-2, USE-2, SIS XHHW-2, RHW-2, USE-2, SIS XHHW-2, RHW-2, USE-2, SIS, PV XHHW-2, RHW-2, SIS XHHW-2, RHW-2, USE-2, SIS, PV RW-90, Teck-90 – RHW-2, RHW, RHH, XHHW-2, XHH, XHHW, SIS RHW, RHH, RHW-2 Components % 83% S1054A 17% V0022G RoHS 83% S1054A 17% V0022G-UV RoHS 70% S1054A 30% V0022G-UV RoHS 50% S1054A 50% V0044G RoHS 50% S1054A 50% V0044G-UV RoHS 95% S1054A 5% S1000B 95% S1016A 5% S1037B 78% S1054A 22% SC5400-0002 RoHS MB ALT FR 50% S1054A 50% SC5400-0003 RoHS MB ALT FR Features Horizontal Flame Horizontal Flame, UV Resistant, Colors Possible Horizontal Flame, FV-1 Flame, UV Resistant, Colors Possible VW-1 VW-1, UV Resistant, Colors Possible Non-FR Rigid Pipe Applications Horizontal Flame, DBDPE-free VW-1, DBDPE-free GENERAL PROPERTIES Specific Gravity 1.01 1.02 1.10 1.31 1.31 0.92 0.95 1.01 1.31 Hardness Shore D, 10 Seconds 47 47 47 48 48 47 59 47 48 Gel 68 68 70 70 70 72 72 68 70 TENSILE PROPERTIES Tensile Strength (psi) 2800 2500 2650 3200 2650 2800 4500 2800 3200 Elongation % 400 400 540 470 540 400 80 400 470 Tensile Retention % 100 100 97 110 110 95 75 95 100 Elongation Retention % 90 90 94 100 100 90 75 90 93 ELECTRICAL Dielectric Strength (V/mil) 1000 1400 1400 1200 1200 1000 – 1000 1200 Dielectric Constant 2.31 2.45 2.61 2.61 2.61 2.24 2.1 2.31 2.61 Dissipation Factor % 0.0012 0.0080 0.008 0.0043 0.0043 0.0008 0.002 0.0012 0.0043 THERMAL Temperature Rating °C 90 90 90 90 90 90 125 90 90 Heat Deformation % 10 5 5 5 5 10 10 10 5 The Syncure™ XLPE portfolio is a two-step, silane- grafted, moisture cross-linkable polyethylene system.

The non-GAAP financial measures include: Adjusted Earnings Per Share, Free Cash Flow, Net Debt/Adjusted EBITDA and Adjusted EBITDA. Avient does not provide reconciliations of forward-looking non-GAAP financial measures, such as outlook for Adjusted EBITDA, Adjusted Earnings Per Share, Net Debt/Adjusted EBITDA and Free Cash Flow to the most comparable GAAP financial measures on a forward-looking basis because Avient is unable to provide a meaningful or accurate calculation or estimation of reconciling items and the information is not available without unreasonable effort. National Defense budget of $842 billion submitted to Congress in Q1 2023 • European NATO members annual defense spend expected to increase by up to 20% Where Avient Wins:  Dyneema® is the world’s strongest fiber™  One of the highest strength to weight ratios of any material on Earth  Direct relationships with industry leading armor manufacturers  Resistant to most chemicals, UV, and moisture to handle any environment Avient Confidential 13 DEFENSE Source: US Department of Defense, defense.gov, NATO13 Source: TRANSPORTATION • Increased EPA regulations requiring improved fuel efficiency, enabled in part by lower-weight vehicles • Automakers preparing for 2/3 of U.S. vehicles to be 100% electric by 2032 Where Avient Wins:  Lightweight panels that establish both strength and stiffness resulting in decreased energy usage, lower emissions  Long-lasting Color applications to resist UV exposure, temperature fluctuations and exceed the stylistic requirements of global automakers 14 $130 $530 Q2 FY $0.60 $2.40 Q2 FY 2023 GUIDANCE 15 Sales Adjusted EBITDA $845 $3,400 Q2 FY Adjusted EPS (in millions) (in millions) CASH FLOW / LEVERAGE 16 • Maintaining free cash flow and leverage guidance from February earnings call • IT investment to further integrate acquired businesses and capture operational efficiencies • Restructuring actions to streamline operations and improve profitability, primarily in Europe ($ millions) 2023E Cash Flow from Operating Activities 350$ Less: Run-Rate CapEx (110) CapEx for IT System Upgrade (25) CapEx for Restructuring (15) Total CapEx (150) Free Cash Flow 200$ Adjusted EBITDA 530$ Net Debt / Adjusted EBITDA 2.9x LONG-TERM REVENUE GROWTH DRIVERS Growth Drivers Long-Term Growth Rate Sustainable Solutions 8–12% Healthcare 8–10% Composites 10% Asia / LATAM 5% Other (GDP growth) 2–3% Avient 6.5% 17 Sustainable Solutions 32% Asia / LATAM 15% Composites 8% Healthcare 6% Other (GDP Growth) 39% • Virtual presentation to be held September 20, 2023 • The company will be conducting an investor-focused presentation around our sustainability solutions portfolio Avient Confidential 18 SUSTAINABILITY INVESTOR DAY 18 $340M $405M $455M $550M $790M $915M 2016 2017 2018 2019 2020PF** 2021 2022PF*** SUSTAINABILITY FOR A BETTER TOMORROW Revenue From Sustainable Solutions* 2016-2022 ($ in millions) Organic Future Growth Revenue Assumptions From Sustainable Solutions: 8 - 12% 19 *Avient Sustainable Solutions definitions aligned with FTC 2012 Guide for the Use of Environmental Marketing Claims (“Green Guides”) **2020 is Pro Forma to include full year of the Clariant Color business ***2022 is Pro Forma for the acquisition of Avient Protective Materials and the divestiture of Distribution $1,175M Lightweighting Eco-Conscious Recycle Solutions VOC Reduction Sustainable Infrastructure Human Health & Safety Reduced Energy Use Bio-polymers SUSTAINABILITY NEEDS BY MARKET B&C • Eco-Conscious • Carbon footprint • Resource conservation Healthcare • Carbon footprint • Bio based content • Eco-Conscious Automotive • Light weighting • Recycled Content • VOC reduction Consumer • Recycle Solutions • Light weighting • Carbon Footprint Packaging • Recycle Solutions • Light weighting • Food waste reduction Common Theme: CO2 Emission Goals Increasing Single-Use Plastic Regulation 20 INVESTING IN INNOVATION S U S T A I N A B I L I T Y P O R T F O L I O 21 AP P EN D IX 24 RAW MATERIAL 2022 ANNUAL PURCHASES Performance Additives 16% Pigments 12% TiO2 10% Dyestuffs 2% Polyethylene 11% Nylon 6% Polypropylene 5% Styrenic Block Copolymer 5% Other Raw Materials 33% ~40% hydrocarbon based (Grey shaded materials are hydrocarbon based, includes portion of “Other Raw Materials”) Non-hydrocarbon based materials • Cost inflation decelerating, particularly for hydrocarbon-based raw materials 2022 pro forma results for the acquisition of Avient Protective Materials SEGMENT DATA U.S. & Canada 40% EMEA 37% Asia 18% Latin America 5% 2022 PRO FORMA SEGMENT, END MARKET AND GEOGRAPHY GEOGRAPHY REVENUESEGMENT FINANCIALS Consumer 20% Packaging 24% Industrial 15% Building and Construction 10% Telecommunications 4% Energy 4% Defense 6% END MARKET REVENUE $2,355M $402M $1,300M $272M Sales EBITDA Specialty Engineered Materials Color Additives and Inks $592M$3,653M (1) Transportation 9% Healthcare 8% 26 (1) Total company sales and adjusted EBITDA of $3,653M and $592M, respectively, include intercompany sales eliminations and corporate costs C O L O R , A D D I T I V E S & I N K S 2022 REVENUE | $2 .4 B ILL ION US & Canada 34% EMEA 38% Asia 20% Latin America 8% END MARKET REGION 27 Packaging 34% Consumer 21% Healthcare 8% Industrial 15% Transportation 8% Building & Construction 11% Telecommunications 1% Energy 2% S P E C I A LT Y E N G I N E E R E D M AT E R I A L S 2022 PRO FORMA REVENUE | $1 .3 B ILL ION END MARKET US & Canada 52% EMEA 35% Asia 13% REGION 28 Packaging 5% Consumer 19% Healthcare 8%Industrial 16% Transportation 10% Telecommunications 10% Energy 9% Defense 15% Building & Construction 8% Packaging 32% Consumer 27% Healthcare 8% Industrial 14% Building & Construction 5% Telecommunications 3% Energy 1% Defense 1% Asia (18% of sales) Transportation 9% 2022 PROFORMA AVIENT REGIONAL SALES BY END MARKET Packaging 27% Consumer 14% Healthcare 5% Industrial 17% Building & Construction 10% Energy 5% Defense 8% EMEA (37% of sales)Transportation 11% Packaging 13% Consumer 24% Healthcare 12% Industrial 15% Building & Construction 13% Energy 5% Defense 5% US & Canada (40% of sales) Transportation 7% Packaging 56% Consumer 23% Healthcare 4% Industrial 7% Building & Construction 4% Telecommunications 1% LATAM (5% of sales) Transportation 5% Telecommunications 3% Telecommunications 6% 29 PEER COMPARISONS AVIENT IS ASSET LIGHT Capex / Revenue 2023E (%) Avient Specialty Formulators Other Specialty / Chemical Companies Source: Peer data per Bloomberg as of April 28, 2023 Note: Avient reflects 2023 estimated revenue of $3,400 and estimated run-rate CAPEX of $110M. 31 3 2 3 3 4 4 3 3 5 5 5 6 7 9 A vi en t K W R P P G F U L R P M A V Y F M C H U N H X L C E E C L A S H E M N S C L FREE CASH FLOW CONVERSION Source: Peer data per Bloomberg as of April 28, 2023 Note: Free cash flow conversion calculated as (Adjusted EBITDA – Capex) / Adjusted EBITDA.

respectively; full year free cash flow expectation maintained at We continue to generate strong cash flow from operations and are maintaining our full year free cash flow guidance of The non-GAAP financial measures include adjusted EPS, adjusted operating income, adjusted gross margin, adjusted EBITDA, and free cash flow.

Richardson said, "Our focus on working capital management and conversion of our accelerating earnings drove $71 million in free cash flow, giving us $264 million in cash as of September 30, 2014. Free cash flow is calculated as follows: Free cash flow

Avient does not provide reconciliations of forward-looking non-GAAP financial measures, such as outlook for Adjusted EBITDA, Adjusted Earnings Per Share and Free Cash Flow to the most comparable GAAP financial measures on a forward-looking basis because Avient is unable to provide a meaningful or accurate calculation or estimation of reconciling items and the information is not available without unreasonable effort. Additionally, Adjusted EPS excludes the impact of special items and amortization expense associated with intangible assets. 2 3 AVIENT OVERVIEW OUR VISION: Creating specialized and sustainable material solutions that transform customer challenges into opportunities, bringing new products to life for a better world 2023 Financial GuidanceCompany Overview 2022 Pro Forma Revenue By: 9,700 Employees 104 Manufacturing Sites 20,000+ Customers Key Highlights  Premier formulator of specialized and sustainable material solutions  Asset-light business model, with flexibility to adapt to customer needs  Best-in-class technology and service (140+ PhDs / 2,500+ patents)  History of transformation through successful M&A while consistently returning cash to shareholders  Poised for continued future growth in excess of GDP $3.4B Revenue $2.40 Adjusted EPS $530M Adjusted EBITDA 15.6% Adjusted EBITDA Margins $200M Free Cash Flow 2.9x Net Leverage Over $1B in share buybacks since 2011 Raised dividend for 12 consecutive years, a 16% CAGR since 2011 Geography Segment Industry U.S. & Canada EMEA Asia Latin America 64% 36% Specialty Engineered Materials Color Additives and Inks 40% 37% 18% 5% 6% 8% 24% 20% 10% 15% 9% 4% 4% Defense Healthcare Packaging Consumer Building & Construction Industrial Transportation Energy Telecom 4 CREATING A WORLD-CLASS SUSTAINABLE ORGANIZATION 1. 6.5% annualized long term sales growth leveraging sustainable solutions, composites, healthcare and emerging regions 2. Maintain asset-light, 80% free cash flow conversion profile and be valued as a specialty formulator 5.

TEMPERATURE Material Rear °F (°C) Center °F (°C) Front °F (°C) Nozzle °F (°C) Melt °F (°C) Mold °F (°C) Nylon 6,6 14% NiCF 540–570 (280–300) 530–560 (275–290) 530–560 (275–290) 540–570 (280–300) 540–570 (280–300) 200–300 (90–150) Nylon 6,6 30% SS 540–570 (280–300) 530–560 (275–290) 530–560 (275–290) 540–570 (280–300) 540–570 (280–300) 200–300 (90–150) PBT 14% NiCF 510–410 (265–280) 490–540 (255–280) 480–530 (250–275) 480–530 (250–275) 480–530 (250–275) 150–250 (65–120) PC 14% NiCF 540–570 (280–300) 540–570 (280–300) 530–560 (275–290) 530–560 (275–290) 530–560 (275–290) 150–250 (65–120) ABS 14% NiCF 470–520 (240–270) 460–520 (240–270) 460–520 (240–270) 460–530 (240–275) 460–530 (240–275) 100–200 (40–90) PP 14% NiCF 440–480 (225–250) 440–480 (225–250) 430–470 (220–245) 420–460 (215–240) 420–460 (215–240) 125–175 (50–80) DRYING Material Temperature °F (°C) Time Minimum Moisture Maximum Moisture Nylon 6,6 14% NiCF 180 (80) 4–5 hours 0.05% 0.20% Nylon 6,6 30% SS 180 (80) 4–5 hours 0.05% 0.20% PBT 14% NiCF 250 (120) 6-8 hours 0.02% 0.03% PC 14% NiCF 250 (120) 3–4 hours 0.02% 0.02% ABS 14% NiCF 200 (90) 2–4 hours 0.05% 0.10% PP 14% NiCF 180 (80) 2–4 hours 0.20% 0.30% Equipment • Feed throats smaller than 2.5" may cause bridging due to pellet size - Larger feed throats will be more advantageous with long fiber EMI shielding resins • General purpose metering screw is recommended - Mixing/barrier screws are not recommended • L/D ratio - 18:1–20:1 (40% feed, 40% transition, 20% metering) • Low compression ratio - 2:1–3:1 • Deep flights recommended - Metering zone 3.5 mm - Feed zone 7.5 mm • Check ring - Three-piece, free-flowing check ring • General purpose nozzle (large nozzle tips are recommended) - Minimum orifice diameter of 7/32" - Tapered nozzles are not recommended for long fiber EMI shielding resins • Clamp tonnage: - 2.5–5 tons/in2 Gates • Large, free-flow gating recommended - 0.25" x 0.125" land length - 0.5" gate depth Runners • Full round gate design • No sharp corners • Minimum of 0.25" diameter • Hot runners can be used PROCESSING Screw Speed Slower screw speeds are recommended to protect fiber length Back Pressure Lower back pressure is recommended to protect fiber length Pack Pressure 60–80% of max injection pressure Hold Pressure 40–60% of max injection pressure Cool Time 10–30 seconds (depends on part geometry and dimensional stability) PROCESS CONSIDERATIONS Recommended – retain fiber length (maximize conductivity) • Low shear process • Low screw speed and screw RPM • Slow Injection speed • Fill to 99–100% on first stage of injection - Reduces potential nesting of fibers at gate location - Improves mechanical performance near gate location - Promotes ideal fiber orientation Resin Rich Surface • Achieved when using a hot mold temperature and longer cure times ≥ Max mold temperature recommendation • Improved surface aesthetic • Reduced surface conductivity • Could reduce attenuation performance in an assembly Fiber Rich Surface • Achieved when using a cold mold temperature and shorter cure times ≤ Minimum mold temperature recommendation • Improved surface aesthetic • Reduced surface conductivity • Could improve attenuation performance in an assembly www.avient.com Copyright © 2020, Avient Corporation.

When a chemical stress cracking agent diffuses into a polymer network it can increase the chain mobility and free volume of the system. MATERIAL BRIEF DESCRIPTION FR PC/ABS Flame retardant, chemical resistance, high ESCR FR PC/PET Flame retardant, impact modified, chemical resistant FR PC/PBT Skin-contact biocompatible, flame retardant, high chemical resistance FR Copolyester Flame retardant, chemical resistant, may incorporate agency-rated materials to meet USP Class VI or ISO 10993 requirements Trilliant™ HC8910 Unfilled PK blend, BPA-free, high chemical resistance, may incorporate agency-rated materials to meet USP Class VI or ISO 10993 requirements Trilliant™ HC8920 FR Non-halogenated flame retardant PK blend, BPA-free, high chemical resistance, may incorporate agency rated materials to meet USP Class VI or ISO 10993 requirements Edgetek™ ET8900 CR Unfilled PK blend, high chemical resistance Edgetek™ ET8900 HI CR High impact PK blend, high chemical resistance Edgetek™ ET8920 FR CR Non-halogenated flame retardant PK blend, high chemical resistance Table 2.

The non-GAAP financial measures include: Organic Performance (which excludes the impact of foreign exchange), Adjusted Earnings Per Share, Adjusted EBITDA, Adjusted EBITDA margins, Free Cash Flow and Adjusted Free Cash Flow. Three Months Ended December 31, 2024 2023 Reconciliation to Condensed Consolidated Statements of Income $ EPS(1) $ EPS(1) Net income from continuing operations attributable to Avient shareholders $ 48.3 $ 0.52 $ 27.8 $ 0.30 Special items, after-tax (18.0) (0.20) 5.4 0.06 Amortization expense, after-tax 14.8 0.17 15.0 0.16 Adjusted net income / EPS $ 45.1 $ 0.49 $ 48.2 $ 0.52 (1) Per share amounts may not recalculate from figures presented herein due to rounding Year Ended December 31, 2024 2023 Reconciliation to Condensed Consolidated Statements of Income $ EPS(1) $ EPS(1) Net income from continuing operations attributable to Avient shareholders $ 169.5 $ 1.84 $ 75.8 $ 0.83 Special items, after-tax 15.9 0.17 79.3 0.86 Amortization expense, after-tax 59.5 0.65 61.5 0.67 Adjusted net income / EPS $ 244.9 $ 2.66 $ 216.6 $ 2.36 (1) Per share amounts may not recalculate from figures presented herein due to rounding Three Months Ended December 31, Year Ended December 31, Reconciliation to EBITDA and Adjusted EBITDA: 2024 2023 2024 2023 Net income from continuing operations – GAAP $ 48.5 $ 27.6 $ 170.7 $ 76.3 Income tax expense (benefit) 14.8 (7.0) 54.1 11.0 Interest expense 25.5 26.8 105.6 115.3 Depreciation and amortization from continuing operations 45.4 44.2 179.7 188.8 EBITDA from continuing operations $ 134.2 $ 91.6 $ 510.1 $ 391.4 Special items, before tax (23.9) 22.4 20.1 114.6 Interest expense included in special items — (0.1) (2.3) (2.3) Depreciation and amortization included in special items (0.3) — (1.5) (1.9) Adjusted EBITDA $ 110.0 $ 113.9 $ 526.4 $ 501.8 Adjusted EBITDA as a percent of sales 14.7 % 15.8 % 16.2 % 16.0 % 1 Three Months Ended December 31, Year Ended December 31, 2024 2023 2024 2023 Sales: Color, Additives and Inks $ 467.7 $ 459.4 $ 2,046.5 $ 2,007.4 Specialty Engineered Materials 279.7 259.8 1,196.8 1,138.2 Corporate (0.9) (0.2) (2.9) (2.8) Sales $ 746.5 $ 719.0 $ 3,240.4 $ 3,142.8 Gross margin: Color, Additives and Inks $ 152.6 $ 148.3 $ 681.1 $ 631.2 Specialty Engineered Materials 84.2 78.1 374.9 341.8 Corporate 22.7 (17.5) 0.7 (80.5) Gross margin $ 259.5 $ 208.9 $ 1,056.7 $ 892.5 Selling and administrative expense: Color, Additives and Inks $ 92.8 $ 86.5 $ 384.9 $ 371.3 Specialty Engineered Materials 49.6 48.7 207.7 199.3 Corporate 31.5 30.6 134.8 125.1 Selling and administrative expense $ 173.9 $ 165.8 $ 727.4 $ 695.7 Operating income: Color, Additives and Inks $ 59.8 $ 61.8 $ 296.2 $ 259.9 Specialty Engineered Materials 34.6 29.4 167.2 142.5 Corporate (8.8) (48.1) (134.1) (205.6) Operating income $ 85.6 $ 43.1 $ 329.3 $ 196.8 Depreciation and amortization: Color, Additives and Inks $ 21.9 $ 22.2 $ 87.5 $ 98.3 Specialty Engineered Materials 21.0 19.8 82.1 81.5 Corporate 2.5 2.2 10.1 9.0 Depreciation and amortization $ 45.4 $ 44.2 $ 179.7 $ 188.8 Earnings before interest, taxes, depreciation and amortization (EBITDA): Color, Additives and Inks $ 81.7 $ 84.0 $ 383.7 $ 358.2 Specialty Engineered Materials 55.6 49.2 249.3 224.0 Corporate (6.3) (45.9) (124.0) (196.6) Other income, net 3.2 4.3 1.1 5.8 EBITDA from continuing operations $ 134.2 $ 91.6 $ 510.1 $ 391.4 Special items, before tax (23.9) 22.4 20.1 114.6 Interest expense included in special items — (0.1) (2.3) (2.3) Depreciation and amortization included in special items (0.3) — (1.5) (1.9) Adjusted EBITDA $ 110.0 $ 113.9 $ 526.4 $ 501.8 2 Year Ended December 31, Adjusted Free Cash Flow Calculation 2024 2023 Cash provided by operating activities $ 256.8 $ 201.6 Taxes paid on gain on sale of business — 104.1 One-time payout associated with deferred compensation plans 20.8 — Adjusted cash provided by operating activities $ 277.6 $ 305.7 Capital expenditures (121.9) (119.4) Adjusted free cash flow $ 155.7 $ 186.3 Three Months Ended March 31, 2024 Reconciliation to Condensed Consolidated Statements of Income $ EPS(1) Net income from continuing operations attributable to Avient shareholders $ 49.4 $ 0.54 Special items, after-tax 5.5 0.06 Amortization expense, after-tax 14.9 0.16 Adjusted net income / EPS $ 69.8 $ 0.76 (1) Per share amounts may not recalculate from figures presented herein due to rounding 3 AVNT Q4 2024 webcast slides_w_non-GAAP.pdf AVNT Q4 2024 webcast slides_v16.pdf Webcast slides w EPS fix.pdf AVNT Q4 2024 webcast slides_w_non-GAAP IR Deck - AVNT-2024.12.31 2.06.25 12PM.pdf Attachment