PolyOne is exhibiting at MD&M West in Anaheim, California, in booth 2201 from February 5-7, 2019.

This material was repeatedly subjected to severe impact during tests in which two iPhone 6/7 cases were dropped from an industry-standard range of heights, from 4 to 14 feet.

CLEVELAND – February 7, 2018 – PolyOne Corporation today announced it expects to begin production of thermoplastic elastomers (TPEs) this summer at its existing facility in Pune, India.

PolyOne is exhibiting in booth 2201 at MD&M West at the Anaheim Convention Center, February 7-9, 2017.

Testing at Fraunhofer ICT Institute in Pfinztal, Germany has shown that a 40% filled reSound™ NF formulation has equivalent performance to a 30% filled short glass fiber reinforced alternative, at a 7-8% lower density.

July 7, 2014

Performance improvement: At the highest energy impacts, based on 7 to 9 mph for a large runner, Brooks testing shows the TPE-based system provides a 30-50 percent improvement in cushioning over traditional systems.

Winona, Minnesota 7. La Porte, Texas 7. La Porte, Texas 7.

KEY CHARACTERISTICS The primary features and benefits of Gravi-Tech formulations are: • Customized density, offering a wide range of specific gravities from 1.5 to 11 gm/cm3 • Broad modulus range, from very flexible to very rigid grades • Corrosion resistance, withstanding oxidation for long-term use and benefit • Chemical resistance, withstanding fuels, oils and other harsh chemicals Additional features include: • Design flexibility and processing ease • Good impact strength • Elevated heat deflection temperature 6 Gravi-Tech Design Guide 7 CHAPTER 2 | PROCESS SETTINGS Density Modified Formulations Gravi-Tech™ polymer-metal composites are high-density materials developed as thermoplastic-based alternatives to lead and other traditional metals. Figure 10 shows the proper design for structural holes.1 Figure 7 - Boss Design Guidelines 2.5* ID DIA. The gate freeze time is 6 seconds, therefore the ideal hold time is 7–8 seconds Cooling and Recovery Time Two variables will dictate the cooling time of a part: screw recovery time and material cooling time.

CANDY PINK 7