Base Resin PPA PC PSU PES PPS Co- polymer Acetal PEEK PA Barrel Temperatures* °F (°C) Rear Zone 550–580 (288–305) 550–590 (288–310) 600–640 (316–338) 630–660 (332–338) 550–580 (288–304) 350–370 (177–188) 660–700 (349–371) 440–490 (227–254) Center Zone 560–600 (293–316) 570–600 (300–316) 620–670 (327–354) 650–680 (343–360) 560–615 (293–324) 380–390 (193–200) 700–730 (371–388) 470–510 (243–266) Front Zone 580–620 (304–327) 580–630 (304–322) 630–680 (332–360) 670–730 (354–388) 590–630 (310–332) 390–430 (200–221) 720–750 (382–400) 490–540 (254–282) Nozzle 575–615 (302–324) 580–630 (304–322) 630–680 (332–360) 680–700 (360–371) 600–625 (316–330) 380–415 (193–213) 720–750 (382–400) 520–570 (271–300) Melt Temperature 575–615 (302–324) 580–625 (304–330) 625–675 (330–358) 650–710 (343–377) 600–625 (316–330) 370–410 (188–210) 670–740 (354–393) 520–570 (271–300) Mold Temperature 250–300 (121–150) 175–240 (80–116) 190–300 (88–150) 225–325 (107–164) 250–325 (121–164) 190–250 (88–121) 290–375 (143–190) 150–200 (66–93) Pack & Hold Pressure 50%–75% of Injection Pressure Injection Velocity in/s 1.0–3.0 Back Pressure psi 50 Screw Speed rpm 50–90 Drying Parameters °F (°C) 6 hrs @ 175 (80) 4 hrs @ 250 (121) 4 hrs @ 275 (135) 4 hrs @ 250 (121) 3 hrs @ 300 (150) 2 hrs @ 200 (93) 3 hrs @ 275 (135) 4 hrs @ 180 (82) Cushion in 0.125–0.250 Screw Compression Ratio 2.5:1–3.5:1 2.0:1–2.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 Nozzle Type General General General General General General General Reverse Taper Clamp Pressure 5–6 Tons/in2 of projected area of cavities and runner system * Barrel temperatures should be elevated for compounds designed for electrical insulative properties. Cut vent depths to: - PPA Compounds: 0.0015"–0.0025" depth and 0.250" width - PC Compounds: 0.002"–0.004" depth and 0.250" width - PSU Compounds: 0.003"–0.004" depth and 0.250" width - PES Compounds: 0.003"–0.004" depth and 0.250" width - PPS Compounds: 0.002"–0.003" depth and 0.250" width - Acetal Compounds: 0.0015" minimum depth and 0.250" width - PEEK Compounds: 0.002"–0.004" depth and 0.250" width - Nylon Compounds: 0.002" minimum depth and 0.250" width • Increase vent depth to 0.060" (1.5mm) at 0.250" (4.0mm) away from the cavity and vent to atmosphere.

基础树脂 加工指南 3 PC PE PEEK PP PPS 480–570 (250–300) 400–445 (200–230) 660–700 (350–475) 400–440 (200–225) 520–600 (270–300) 500–580 (260–305) 410–455 (207–237) 670–710 (357–385) 410–450 (205–230) 550–610 (285–310) 515–590 (267–310) 420–465 (213–243) 680–720 (363–400) 420–455 (215–235) 570–620 (300–320) 530–600 (275–315) 430–475 (220–250) 700–730 (370–395) 430–460 (220–240) 610–620 (320–325) 530–615 (275–325) 430–495 (220–260) 700–725 (370–385) 430–475 (220–250) 610–635 (320–335) 160–240 (70–115) 80–140 (25–60) 300–400 (150–200) 80–140 (25–60) 190–300 (90–150) 250 (125) 3–4 小时 0.02% 160 (70) 2 小时 2 小时 300 (150) 3–4 小时 0.10% 160 (70) 280 (135) 2–3 小时 0.01%–0.20% 备注 1. 通用 通用 通用 通用 通用 加工指南 3 PC PE PEEK PP PPS 480–570 (250–300) 400–445 (200–230) 660–700 (350–475) 400–440 (200–225) 520–600 (270–300) 500–580 (260–305) 410–455 (207–237) 670–710 (357–385) 410–450 (205–230) 550–610 (285–310) 515–590 (267–310) 420–465 (213–243) 680–720 (363–400) 420–455 (215–235) 570–620 (300–320) 530–600 (275–315) 430–475 (220–250) 700–730 (370–395) 430–460 (220–240) 610–620 (320–325) 530–615 (275–325) 430–495 (220–260) 700–725 (370–385) 430–475 (220–250) 610–635 (320–335) 160–240 (70–115) 80–140 (25–60) 300–400 (150–200) 80–140 (25–60) 190–300 (90–150) 250 (125) 3–4 小时 0.02% 160 (70) 2 小时 2 小时 300 (150) 3–4 小时 0.10% 160 (70) 280 (135) 2–3 小时 0.01%–0.20% 备注 1. PC化合物：0.001"–0.002" 深，0.250" 宽 PC/PSU化合物：0.002"-0.003" 深，0.250" 宽 PES化合物：0.003"-0.004" 深，0.250" 宽 PEI化合物：0.001"-0.003" 深，0.250" 宽 PP化合物：0.001"-0.002" 深，0.250" 宽 ABS化合物：0.0015"-0.0025" 深，0.250" 宽 PEEK化合物：0.002"-0.004" 深，0.250" 宽 尼龙化合物：0.002"最小深度，0.250" 宽 将离模腔4.0mm（0.250"）处的排气口深度增加到1.0mm（0.040"），并且 通向大气。

Ultimately, the company selected a Versaflex™ OM overmolding grade that bonded tightly to the polycarbonate (PC) substrate of the grips without the need for adhesives.

Cesa Laser Marking Additives can be used with thermoplastics commonly used in vehicles including: • PP • PC/ABS • Polyamide • Polyacetal (POM) WHY SELECT LASER MARKING?

We offer solutions for the transparent and translucent thermoplastics used in the automotive industry (typically PMMA and PC).

waterproof watches, and eyewear frames • Healthcare products – ISO and USP pre-tested solutions are sold as Mevopur™ Healthcare Functional Additives BENEFITS • Produces strong, durable, and consistent seams • Available for polyolefins, TPE, ABS, SAN, PA, PC, PMMA, and others on request • Delivered as concentrates or ready-to-use formulations • Can be combined with color into a single product • Specific regulatory compliance available on request, e.g., UL 94 recognition, EU and US food contact • Product guidance from our experts PRODUCT BULLETIN Copyright © 2023, Avient Corporation.

Cesa™ Flame Retardant Additives enable a fire performance in line with different levels of Glow Wire temperatures (IEC 60685-2-12) for various recycled resins including PP, PC, and PS.

PPC750 PURPLE PC PPC449 VENUS PC PPC668 BLUE PC

Versaflex™ OM 1040X – Highly colorable solution for overmolding onto PC, ABS, and PC/ABS blends Bonds to PC, ABS, PC/ABS, copolyester, and polystyrene  PC, ABS and PC/ABS overmolding materials are available in water-clear, natural, thin wall overmolding, and high performance grades.

KEY CHARACTERISTICS • Fabric FX can be formulated to include properties such as UV color protection and anti-scratch performance • Fabric FX can be processed on standard molding machinery • Different matrix materials can be enhanced with Fabric FX, including ABS, PC/ABS, PB, and unfilled or talc-filled PP • There is no limitation on the graining that can be used; the fabric effect will differ depending on the grain effect engraved in the tool • If parts are extruded or a mold is not engraved, final parts will have an attractive speckled appearance, but will not be textured TYPICAL USES Fabric FX concentrates are suitable for any application that could benefit from an enhanced textile-like appearance.