These injection moldable TPEs can be overmolded to polypropylene (PP) and come in a natural grade that can be easily colored.

These injection moldable TPEs can be overmolded to polypropylene (PP) and come in a natural grade that can be easily colored.

Renewable resources on the other hand replenish naturally, and can reduce pollution, mitigate climate change, and support better health outcomes for humans.

Renewable resources on the other hand replenish naturally, and can reduce pollution, mitigate climate change, and support better health outcomes for humans.

Le Vendeur ne donne aucune garantie de quelque nature que ce soit à l'égard du Produit, qu'elle soit expresse ou implicite, concernant sa qualité marchande ou son adéquation à un usage particulier, qu'il soit utilisé seul ou en association avec tout autre matériau ou dans tout procédé, et aucune des parties ne saurait s’appuyer sur une quelconque déclaration faite en dehors des présentes Conditions. L’Acheteur sera redevable envers le Vendeur de tous autres taxes ou couts de nature fiscale supportés par le Vendeur au titre de la fabrication et de l’acheminement des Produits sauf à ce que ces couts soient inclus dans le prix de vente des Produits au jour de la conclusion de la commande. 13. A cet égard, l'Acheteur renonce à invoquer et à bénéficier de toute loi ou règlement résultant des règles du droit du travail et/ou du droit de la sécurité sociale et qui serait de nature à exonérer l'Acheteur de ses obligations à l'égard du Vendeur. 18.

Avient is fully committed to protecting the environment by addressing climate change, conserving natural resources and preventing pollution. While the vote to approve Named Executive Officer compensation is non-binding and solely advisory in nature, our Board and the Compensation Committee will review the voting results. Senior management believes the measures described above are useful to investors because they allow for comparison to Avient's performance in prior periods without the effect of items that, by their nature, tend to obscure Avient's operating results due to the potential variability across periods based on timing, frequency and magnitude.

We believe outdoor enthusiasts share an astonishing passion for nature, even when the path they take to immerse themselves in their surroundings varies a great deal.

• Only naturally balanced runner systems (“H” pattern) are recommended. • Runner diameters should not be less than the part thickness. • Runner diameter should be 1.5x the part thickness. • Step each 90° bend in the system down in size. • Place vents at each 90° intersection and vent to atmosphere. • Hot runner molds are acceptable and should be sized by the manufacturer.

GUIDELINES FOR USING CESA CLEAN ADDITIVES • Cesa Clean works best when molded maintaining normal (injection) pressure/shear • For best results, Avient recommends a “Running Color Change” which eliminates breaks in the molding cycle • Since the Cesa Clean concentrate will expand, it is recommended to reduce the shot size by 20% • It is designed for use at a let-down ratio (LDR) of 3.0% or (33:1); however, use rate can vary depending on the severity of the contamination but typically is 2.0–4.0% (a use rate higher than 6.0% may not have any positive affect on the cleaning performance) • Using Cesa Clean as a routine part of your color change rotation will allow faster changes and consume a minimal amount of raw material - Note: If the manifold is not cleaned routinely, this process may be more time consuming and additional material will be required • It is best to process at your normal polymer processing temperatures - For best performance, stock temperature should be at least 400°F - If 400°F is achieved during the purging process, no additional activation will occur during the reprocessing of regrind - All parts produced during the “Running Purge Cycle” should be captured as regrind, resulting in a scrap-free color change - If using sequential gates, open and close all gates at the same time while purging the tool - If contamination appears to be coming from one gate, open and close first, and for an extended period of time, to force more material through this location - When cleaning in this manner, pay close attention to shot size - Parts containing the previous or new color plus any Cesa Clean can be used as regrind INTRODUCING CESA CLEAN TO YOUR PROCESS Hand Blend • Hand weigh enough of the Cesa Clean and natural resin mix to equate to 3–5 times the barrel capacity • Use rate should be 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • Note: Do not attempt to vacuum load more than 15 feet from source as stratification/separation may occur Volumetric Feeder • Calibrate feeder to dispense 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • This style of feeder is highly recommended for at-the-throat metering of Cesa Clean Blending Units Most blenders have an extra bin for an additive • Fill the additive bin with Cesa Clean • Set blender to introduce the Cesa Clean at 2.0 to 4.0% • Note: Do not air convey any further than 15 feet as Cesa Clean has a high density and may separate from the mix.

Due to the thin viscosity and mobile nature of the product, consideration should be given to packaging and the need for complete product integrity throughout the distribution chain.