EUROPE: SDS for Europe can be obtained by contacting the appropriate regional office. DB4076 Neutral (1275-0 Clear) EUROPE: SDS for Europe can be obtained by contacting the appropriate regional office.

EUROPE: SDS for Europe can be obtained by contacting the appropriate regional office. X TT9200-8706-0 EC Grey EUROPE: SDS for Europe can be obtained by contacting the appropriate regional office.

EUROPE: SDS for Europe can be obtained by contacting the appropriate regional office. X TT-9200-8705-0 EI Grey EUROPE: SDS for Europe can be obtained by contacting the appropriate regional office.

EUROPE: SDS for Europe can be obtained by contacting the appropriate regional office. DB4075 Neutral (1217-0) EUROPE: SDS for Europe can be obtained by contacting the appropriate regional office.

EUROPE: SDS for Europe can be obtained by contacting the appropriate regional office. DB4147 NEUTRAL (SM1025-0) EUROPE: SDS for Europe can be obtained by contacting the appropriate regional office.

EUROPE: SDS for Europe can be obtained by contacting the appropriate regional office. X 46038-0001A-0-1 EUROPE: SDS for Europe can be obtained by contacting the appropriate regional office.

Due to their hygroscopic nature, nylons experience a reduction in structural performance when conditioned with moisture that is absorbed from humid conditions or direct contact with water. Surface gloss levels >70 can be obtained in polished molds with these environmentally stabilized formulations. 1.844.4AVIENT www.avient.com Copyright © 2021, Avient Corporation. This literature shall NOT operate as permission, recommendation, or inducement to practice any patented invention without permission of the patent owner. 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 0 100 200 300 400 500 600 700 800 900 1000 Te ns ile S tr en gt h Re te nt io n Hours Submerged Tensile Strength Retention Standard Nylon 6/6, 50% Long Glass Fiber Moisture Resistant Nylon 6/6, 50% Long Glass Fiber Specialty Nylon 6/12, 50% Long Glass Fiber

• Consumer home goods, such as bath mats • Outdoor recreation equipment • Fishing gear • Water sports equipment PRODUCT BULLETIN 0 200 400 600 800 1000 1200 0 25 50 75 100 Initial 6 Month 6-Month Ocean Water* Immersion Study Hardness, Shore A (ASTM D2240) Tensile Strength, psi (ASTM D638) 1.844.4AVIENT www.avient.com Copyright © 2022, Avient Corporation. Versaflex XP 2850 Hardness, Shore A 53 Specific Gravity 0.89 Color Natural Tensile Strength (psi) 616.4 Elongation at Break (%) 541.4 Viscosity @ 11170/sec (Pa s) 10.9 Dry Kinetic COF 1.256 Wet Kinetic COF 2.463 Increase in COF* (%) 96.1 Abrasion Loss** (mg/cycle) 0.014 Bondability*** PP, PE TECHNICAL PROPERTIES OF VERSAFLEX XP WET GRIP MATERIAL * Pull time = 5 sec; Sled Weight = 203 grams; Rate = 30cm/min ** Weight = 1000 grams; Cycles = 500; Wheel = H-18 *** For bonding to other substrates, please contact Avient COMPARING VERSAFLEX XP 2850 WITH COMMONLY USED WET GRIP MATERIALS 3.00 2.50 2.00 1.50 1.00 0.50 0.00 1.26 2.46 0.85 0.52 0.40 1.20 0.52 0.50 0.52 0.500.50 0.49 Wax Rubber EVA Foam Rubberized Vinyl Versaflex XP 2850 PVC DRY WET Wet/Dry COF Performance *Prepared to standard ASTM D1141-98R21 ps i Du ro m et er (S ho re A )

MARINE PLYWOOD Hammerhead™ panels are three times lighter than marine plywood MOISTURE ABSORPTION % weight change due to water absorption for selected composites and marine plywood 10000 60000 110000 160000 210000 260000 310000 360000 0.5 0.75 1 1.25 1.5 F le x u ra l R ig id it y - lb / in 2 Panel Thickness - in Hammerhead™ 5.3lb/in^3 Core Density Hammerhead™ 8.4lb/in^3 Core Density Plywood — Hammerhead™ 5.3 lb/ft3 Core Density — Hammerhead™ 8.4 lb/ft3 Core Density — Marine Plywood 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 0 10 20 30 40 50 60 70 80 90 100 % W e ig h t C h a n g e Immersion Time - Days .50" Hammerhead™ .75" Hammerhead™ 1" Hammerhead™ 1.50" Hammerhead™ .50" marine plywood .75" marine plywood 1" marine plywood Fl ex ur al R ig id ity - lb -in 2 INSTALLATION INSTRUCTIONS CUTTING & DRILLING Recommended blade: Industrial fine cut-off saw blade, 10" x 80 teeth 38° ATB grind with 5/8" bore, PTFE coating Recommended router bits: 3/8" diameter, 4 flute TiAlN (titanium aluminum nitride) coated carbide bit FORMING Apply localized 400˚F heat at a length proportional to the panel thickness (see equation below) and bend to shape. Contact Avient for more information. To learn more about Avient’s advanced composite solutions, contact Avient at +1.844.4AVIENT www.avient.com

Contact Avient for more information. Reference to them does not indicate any affiliation with or endorsement by them. 1 surface sanded with 220 grit scuff prep 2 surface primed with 459T For more information on installation, adhesives, and fasteners for specific applications, please contact Avient. To learn more about our advanced composite solutions, contact Avient at 1.844.4AVIENT or visit www.avient.com.