PG 40198 PEARL GN PP PG 40199 PEARL GN PP

PG 51836.00 GN PP PG 51837.00 FROST GN PP

575-GN-30 GN STD FPVC MASTERBATCH

370374 GN PE UV SMARTBATCH 370378 GN PE UV SMARTBATCH

Steel – Static 0.25 0.46 0.18 0.15 0.12 0.19 0.11 0.14 0.13 0.24 0.17 0.17 Impact Notched Izod Impact (23°C, 3.18 mm, Injection Molded) J/m ASTM D256A 41 64(6) 110 107 107 70 80 37 37 75 – 69 Thermal Properties Heat Deflection Temperature ASTM D648 0.45 MPa °C 215(6) – 250 215 216 184 152 151(6) 153(6) 218(6) – – 1.8 MPa °C 65(6) 239(7) 244(6) 210 210 75 94 81.1(6) 88 197(6) – 135(5) Electrical Properties Surface Resistivity ohms/sq ASTM D254 – – – 1.30x1012 1.9x1012 5.2x1012 – – – – – 1.0x109 Dielectric Strength (Short Time) kV/mm – – 8.5 – – – – – – – – – Flammability Flame Rating Class UL 94 HB – – HB HB HB – HB – – – – LubriOne™ Internally Lubricated Formulations NOTES (1) Type I, 5.1mm/min (2) Type I, 21.3 mm/min (3) Type I, 50 mm/min (4) Type I, 5.1mm/min, Break (5) 3.2 mm thick, Unannealed (6) 6.35 mm thick, Unannealed (7) 3.2 mm thick, Annealed PRODUCT DESCRIPTION UNITS TEST METHOD LB6000- 5024 RS HI Natural LB6000- 5021 RS S1 Black LB6000- 5021 RS X2 Black LB6000- 5019 X1 Black LB6700- 5001 RS AF Black NN- 000/01M Black SO REC LB6600- 5030 RS Grey LB3300- 5010 RS Natural LB3300- 5005 RS Natural REC LB3220- 5001 RS C Natural X1 LB8900- 5010 GP Grey LB8900- 5006 RS PE Natural LB8900- 5004 RS PE Natural LB4200- 5022 Black LB4200- 5023 Natural Base Polymer PA 6 PA6/PA66 PA66 PBT PC PKE POM Lubricant UHMWPE1 UHMWPE UHMWPE UHMWPE UHMWPE MoS22 Graphite UHMWPE UHMWPE UHMWPE Graphite UHMWPE UHMWPE MoS2 UHMWPE Filler type GF10 GF30 GF30 GF50 GF50 Unfilled GF33 GF20 MI20 GF10 Unfilled GF20 GF30 Unfilled Unfilled General Properties Specific Gravity g/cm3 ISO 1183 1.18 1.35 1.39 1.55 1.58 1.14 1.44 1.42 1.46 1.23 1.26 1.34 1.43 1.4 1.35 Mechanical Properties Tensile Modulus (23°C) MPa ISO 527-1 4250 9500 9000 15500 16600 3500 10600 6300 3330 4000 1630 5300 9250 2470 2150 Tensile Strength (Yield, 23°C) MPa ISO-527-2 97 150 160 205 200 85 164 102 55 60 60 108 99.1 55 50 Tensile Elongation (Break, 23°C) % ISO-527-2 12 2.5 3 2.7 2.4 3.4 2.0 4.2 8 2.5 46 3.7 1.5 11 11 Flexural Strength (23°C) MPa ISO 178 103 – – 285 265 108 215 127 78 85 38 155 117 73 68 Flexural Modulus (23°C) MPa ISO 178 3250 – – 12400 11100 2690 9000 4700 3000 3100 1380 4600 5450 2210 2070 Impact Charpy Notched Impact Strength (23°C, Injection Molded) kJ/m^2 ISO 179 14 12 10 15 10 3 6 7.7 4.3 12 15 10 7.6 8 5 Charpy Unnotched Impact Strength (23°C, Injection Molded) kJ/m^2 ISO 179 82 55 61 75 60 65 50 47 69 - NB 63 36 NB NB Thermal Properties Deflection Temperature Under Load 1.8 Mpa, Unannealed °C ISO 75-2/A 107 – – 204 – 73 235 – – – 90 210 204 86 80 Cofficient of Friction (CoF) & Wear Rate CoF vs.

Dioxide Flame-Retardant Dispersions Antimony Trioxide Aquamix 104 60 Flame retardant highly eff ective in halogenated latex or in combination with bromine additive. Dioxide Flame-Retardant Dispersions Antimony Trioxide Aquamix 104 60 Flame retardant highly eff ective in halogenated latex or in combination with bromine additive.

4425 East Elwood Street, Suite 104

Syncure™ XLPE Formulaciones Para Polietileno Reticulable PARA CABLES DE BAJA TENSIÓN GUÍA DE SELECCIÓN DE PRODUCTO Syncure™ XLPE POLIETILENO RETICULABLE POR HUMEDAD PARA AISLAMIENTO PARA CABLES DE BAJA TENSIÓN SISTEMA S100FH S100FH-XUV S100FH-UV S100FV S100FV-UV S112NA S120NA S200FH S200FV Aplicaciones Cable para construcción, bandeja de cables Cable para construcción, bandeja de cables Cable fotovoltaico (PV) Cable para construcción, bandeja de cables Cable para construcción, bandeja de cables Cable para construcción, Teck-90 Tuberia Cable para edificaciones, tray cables, cables de servicio Cable para edificaciones, tray cables, cables de servicio Especificaciones UL 44 UL 44 UL 44, UL 4703 UL 44 UL 44 CSA 22.2 Usable para NSF 61 UL 44 UL 44 Tipo de alambre XHHW-2, RHW-2, USE-2, SIS XHHW-2, RHW-2, USE-2, SIS XHHW-2, RHW-2, USE-2, SIS, PV XHHW-2, RHW-2, SIS XHHW-2, RHW-2, USE-2, SIS, PV RW-90, Teck-90 – RHW-2, RHW, RHH, XHHW-2, XHH, XHHW, SIS RHW, RHH, RHW-2 % de componentes 83% S1054A 17% V0022G RoHS 83% S1054A 17% V0022G-UV RoHS 70% S1054A 30% V0022G-UV RoHS 50% S1054A 50% V0044G RoHS 50% S1054A 50% V0044G-UV RoHS 95% S1054A 5% S1000B 95% S1016A 5% S1037B 78% S1054A 22% SC5400-0002 RoHS MB ALT FR 50% S1054A 50% SC5400-0003 RoHS MB ALT FR Caracteristicas Flama horizontal Flama horizontal, resistencia UV, posibilidad de colorear Flama horizontal, flama FV-1, resistencia UV, posibilidad de colorear VW-1 VW-1, resistencia UV, posibilidad de colorear Sin retardante a la flama Para aplicaciones de tuberia Flama horizontal, libre de DBDPE VW-1, libre de DBDPE PROPIEDADES GENERALES Gravedad Específica 1.01 1.02 1.10 1.31 1.31 0.92 0.95 1.01 1.31 Rigidez Shore D, 10 Segundos 47 47 47 48 48 47 59 47 48 % de Contenido de Gel 68 68 70 70 70 72 72 68 70 PROPIEDADES DE RESISTENCIA A LA TRACCIÓN Resistencia a la Tracción (psi) 2800 2500 2500 3200 2650 2800 4500 2800 3200 % de Elongación 400 400 400 470 540 400 80 400 470 % de Retención de Tracción 100 100 97 110 110 95 75 95 100 % de Retención de Elongación 90 90 94 100 100 90 75 90 93 PROPIEDADES ELÉCTRICAS Resistencia Dieléctrica (V/mil) 1000 1400 1400 1200 1200 1000 –– 1000 1200 Constante Dieléctrica 2.31 2.45 2.61 2.61 2.61 2.24 2.1 2.31 2.61 % de Factor de Disipación 0.0012 0.0080 0.008 0.0043 0.0043 0.0008 0.002 0.0012 0.0043 PROPIEDADES TÉRMICAS Condiciones Nominales de Temperatura en °C 90 90 90 90 90 90 125 90 90 % de Deformación Térmica 10 10 5 5 5 10 10 10 5 La cartera Syncure XLPE es un sistema de dos pasos de Polietileno reticulable por humedad, injertado con Silano.

Base Resin PC PC/PSU PES PEI PP ABS PEEK PA Barrel Temperatures* °F (°C) Rear Zone 530–560 (277–293) 550–575 (288–302) 660–700 (349–371) 675–725 (357–385) 390–420 (199–216) 425–460 (219–238) 680–730 (360–388) 430–500 (221–260) Center Zone 515–560 (269–288) 540–565 (282–296) 650–690 (343–366) 655–710 (352–377) 380–405 (193–207) 415–450 (213–232) 670–710 (354–377) 420–490 (216–254) Front Zone 510–525 (266–274) 530–555 (277–291) 640–680 (338–360) 655–700 (346–371) 370–395 (188–202) 405–440 (207–227) 650–690 (343–366) 410–480 (210–249) Nozzle 520–535 (271–280) 540–565 (282–296) 650–690 (343–366) 665–710 (352–377) 380–400 (193–204) 415–450 (213–232) 660–700 (349–371) 420–490 (216–254) Melt Temperature 525–560 (274–293) 530–580 (277–304) 650–700 (343–371) 660–730 (349–388) 375–395 (191–202) 410–460 (210–238) 650–730 (343–388) 420–500 (216–260) Mold Temperature 175–250 (80–121) 160–220 (71–104) 280–350 (138–177) 275–350 (135–177) 100–135 (38–57) 150–180 (66–82) 300–425 (149–219) 160–230 (71–110) Pack & Hold Pressure 50%–75% of Injection Pressure Injection Velocity in/s 0.5–2.0 Back Pressure psi 50 Screw Speed rpm 40–70 40–70 40–70 40–70 40–70 40–70 40–70 40–70** Drying Parameters °F (°C) 6 hrs @ 250 (121) 4 hrs @ 250 (121) 4 hrs @ 275 (135) 4 hrs @ 250 (121) 3 hrs @ 300 (150) 2 hrs @ 200 (93) 3 hrs @ 275 (135) 4 hrs @ 180 (82) Cushion in 0.125–0.250 Screw Compression Ratio 2.0:1–2.5:1 2.0:1–2.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 Nozzle Type General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose Reverse Taper Clamp Pressure 5–6 Tons/in2 * A reverse temperature profile is important to obtain optimum conductive properties.

POLYSTRAND CONTINUOUS FIBER REINFORCED THERMOPLASTIC TAPES & LAMINATES ™ PRODUCT SELECTION GUIDE Material Min Finished Slit Width Max Finished Slit Width Unidirectional Tape 2” (50.8 mm) 24” (610 mm) X-Ply™, 3-Ply, 4-Ply 2” (50.8 mm) 120” (3048 mm) SLITTING CAPABILITIES Max Unfinished Width Max Finished Slit Width Max Finished Roll Weight Max Roll Length (X-Ply™, Full Width) Up to 125" (3175 mm) Up to 120" (3048 mm) Up to 10,000 lbs (4500 kg) Up to 4,000 ft (1200 m) LAMINATION LINE CAPABILITIES Tape Width Resin Capabilities Fiber Inputs Max Tape Roll Weight Max Roll Length 25" (635 mm) Standard Width, Slit Capabilities PP, PE, PETG, aPET, PA6 Additional polymers in development E-Glass S-Glass, Aramid Up to 1,800 lbs (816 kg) Up to 12,000 ft (366 m) TAPE LINE CAPABILITIES Product Name Resin Fiber Content Areal Weight Nominal Thickness1 Flexural Modulus ASTM D790 Flexural Strength ASTM D790 Tensile Modulus ASTM D3039 Tensile Strength ASTM D3039 wt % lb/ft2 oz/yd2 gsm in mm ksi GPa ksi MPa ksi GPa ksi MPa 6337 PP 63 0.10 14.75 500 0.015 0.38 3570 24.6 58 402 4010 27.6 111 765 6531 65 0.05 7.40 251 0.006 0.15 4020 27.7 73 505 4900 33.8 140 965 6536 0.07 10.32 350 0.009 0.23 4050 27.9 72 494 4500 31.0 131 903 6538 0.14 19.77 670 0.019 0.48 3540 24.4 47 324 4260 29.4 100 689 7034B PP-Black 70 0.07 10.24 347 0.009 0.23 4400 30.3 83 569 5000 34.5 111 765 6020 PE 60 0.08 11.95 405 0.012 0.30 3600 24.8 54 372 3800 26.2 109 752 6621 66 0.10 13.97 474 0.012 0.30 4000 27.6 55 379 4720 32.5 126 869 68222 68 0.16 23.34 791 0.022 0.56 4060 28.0 55 379 4560 31.4 113 779 5843 PETG 58 0.08 11.85 402 0.008 0.20 3680 25.4 90 621 4400 30.3 137 945 5840B aPET-Black 58 0.09 13.00 441 0.009 0.23 4120 28.4 107 738 5080 35.0 150 1034 5860B PA6-Black 58 0.08 11.48 389 0.010 0.25 3620 25.0 104 717 3970 27.4 108 745 TYPICAL PROPERTIES - UNIDIRECTIONAL FIBERGLASS REINFORCED THERMOPLASTIC TAPE 1 Nominal thicknesses indicated are baseline values that may vary depending on material processing and other variables.