KEY PERFORMANCE PROPERTIES1 PHYSICAL NOMINAL VALUE UNIT TEST METHOD Density/Specific Gravity 1.00 ASTM D792 Melt Mass-Flow Rate (MFR) (230°C/2.16kg) 20 g/10 min ASTM D1238 MECHANICAL Tensile Strength 15.0 MPa ASTM D638 Flexural Modulus 1400 MPa ASTM D790 Flexural Strength 35.0 MPa ASTM D790 IMPACT Notched Izod Impact (Injection Molded) 150 J/m ASTM D256 ELECTRICAL Surface Resistivity < 100000 ohms/sq ASTM D257 PROCESSING INFORMATION INJECTION NOMINAL VALUE UNIT Drying Temperature 80 to 90 °C Drying Time 4.0 to 6.0 hr Processing (Melt) Temperature 220 to 250 °C Mold Temperature 30 to 80 °C Trilliant™ HC Electrically Conductive Formulations for Precision Performance Pipette Tips A critical design consideration for pipette tips is the accurate measurement of finite amounts of liquid.

Applications for laser marking include: • Safety belt buckles • Backside of A-, B- and C-pillars • Critical safety parts • Dashboard controls and gauges • Knobs and buttons In addition to parts that may require a permanent mark, laser marking also can be used to add personalization or branding elements to a vehicle.

Compared to previous grades of Amosorb, 4020G halves the b* color shift resulting in lower impact on quality of rPET.

Avient products have not been designed for nor are they promoted or intended for use in: (a) medical devices categorized by either the United States Food and Drug Administration (FDA) or the International Standards Organization (ISO) as an “implant” device; or “Permanent” as defined under US Pharmacopoeia (USP) or ISO standards; or (b) active implantable medical devices as defined in EU Directive 90/385/EEC as amended; or (c) medical devices for “Long Term” use as defined in EU Directive 93/42/EEC as amended.

Our solutions help pipe manufacturers comply with DIN 4102 (B1) or Euroclass B - s1 d0.

Avient products have not been designed for nor are they promoted or intended for use in: (a) medical devices categorized by either the United States Food and Drug Administration (FDA) or the International Standards Organization (ISO) as an “implant” device; or “Permanent” as defined under US Pharmacopoeia (USP) or ISO standards; or (b) active implantable medical devices as defined in EU Directive 90/385/EEC as amended; or (c) medical devices for “Long Term” use as defined in EU Directive 93/42/EEC as amended.

Late payments will bear interest at the greater of: (i) 1.5% per month or (ii) the maximum amount allowed by law under (a) Money Lenders Ordinance (Cap. 163) or (b) interest rate applicable to judgment debts, such interest to accrue on a daily basis from the date when payment becomes due until the date of actual payment. If (i) Buyer is in default of performance of its obligations towards Seller and fails to provide adequate assurance of Buyer’s performance before the date of scheduled delivery; or (ii) if Seller has reasonable doubts with respect to Buyer’s performance of its obligations and Buyer fails to provide to Seller adequate assurance of Buyer’s performance before the date of scheduled delivery and in any case within thirty (30) days of Seller’s demand for such assurance; or (iii) if Buyer becomes insolvent or unable to pay its debts as they mature, or goes into liquidation or any bankruptcy proceeding shall be instituted by or against Buyer or if a trustee or receiver or administrator is appointed for all or a substantial part of the assets of Buyer or if Buyer makes any assignment for the benefit of its creditors; or (iv) in case of non- compliance of Buyer with any law, statute ordinance, regulation, code or standard (“Laws and Standards”), then Seller may by notice in writing to Buyer, without prejudice to any of its other rights: (a) demand return and take repossession of any delivered Products which have not been paid for and all costs relating to the recovery of the Products shall be for the account of Buyer; and/or (b) suspend its performance or terminate its order confirmation for pending delivery of Products unless Buyer makes such payment for Products on a cash in advance basis or provides adequate assurance of such payment for Products to Seller. Buyer expressly warrants that employees, agents and subcontractors of Buyer shall not directly or indirectly (i) accept, promise, offer or provide any improper advantage to, or (ii) enter into an agreement (a) with any entity or person, including officials of a government or a government-controlled entity, or (b) relating to a product, which would constitute an offense or infringement of applicable Laws and Standards. 17.

B. wenn Geschäfte einer Drittpartei zugeführt werden) • wenn die Person die Bestechung möglicherweise selbst vorgeschlagen oder gefordert hat • das Unternehmen der Ansicht ist, dass es ohnehin ein Anrecht auf die Handlung oder den Vorteil hat • wenn eine Person „hätte wissen müssen“, dass es sich um Bestechung handelte Was ist Bestechung? B. einem Familienmitglied, Freund oder Geschäftspartner. B. den Vereinten Nationen Staatsbedienstete sind meist leicht zu erkennen; dies muss aber nicht immer der Fall sein.

Property Unit Hammerhead Composite Panel (non-FR) Hammerhead FR Flame Retardant Panel Areal Weight (lb/sqft) 1.15 1.34 Thickness (in) 1.02 1.02 Max Force* (lbf) 447 508 Modulus* (ksi) 323 321 Flexural Rigidity* (lb*in^2) 85,000 84,000 R-Value (/in) 4 4 MECHANICAL PROPERTIES Class A Class B Class C Flame Spread Index 0–25 26–75 76–200 Smoke Developed Index 0–450 ASTM E84 FLAME SPREAD CLASSIFICATION * ASTM D7249, 22” support span 4-point bend Hammerhead Composite Panel (non-FR) Hammerhead FR Flame Retardant Panel Panel Thickness 1 in. 1 in. 4 in.

MATERIAL SOLUTION DESCRIPTION KEY CHARACTERISTICS POTENTIAL APPLICATIONS Hammerhead™ FR Flame Retardant Composite Panels Industry-first flame retardant thermoplastic composite panels that meet ASTM E84 Class A standards for flame spread and smoke developed and configurations available to meet NFPA 286 corner room burn testing • Excellent flame performance • Moisture, UV, corrosion, impact, and rot resistant • Lightweight structural integrity • Reduce labor cost and time • Interior Wall, Floor & Ceiling Panel Systems • Garage Doors • Interior & Entry Doors • Exterior Sheathing • Siding & Cladding • Kitchen Cabinetry Hammerhead™ and Polystrand™ Composite Panels Thermoplastic composite panels constructed with Polystrand™ continuous fiber laminates thermally bonded to thermoplastic foam or honeycomb cores • Moisture, UV, corrosion, impact, and rot resistant • Lightweight structural integrity • Reduce labor cost and time • Garage Doors • Interior Entry Doors • Interior Wall, Floor & Ceiling Panel Systems • Exterior Sheathing • Siding & Cladding • Kitchen Cabinetry Polystrand™ Continuous Fiber Tapes & Laminates High strength unidirectional (UD) glass fibers combined with thermoplastic resins available in unidirectional tapes or multi-ply laminates • High strength and stiffness • Enables impact resistance • Formulations available to meet ASTM E84 Class A and Class B flame/smoke rating • Composite Deckng • Interior & Entry Doors • Roofing Systems GlasArmor™ Ballistic Resistant Panels Ballistic protection constructed from layers of 0°/90° woven E-glass fiber reinforcements with a proprietary thermoset resin system • UL 752 Level 1–3 compliant • Less than 25% the weight of comparable steel panel • 1-hr fire rating per ASTM E119* • Safe/Panic Rooms • Garage Doors • Interior & Entry Doors ThermoBallistic™ Thermoplastic Panels Industry-first thermoplastic ballistic resistant panels thermally formed with layers of 0°/90° UD E-glass fiber reinforcements and polyolefin-based resin systems • UL 752 Level 3 compliant • Extremely lightweight • Moisture, UV, and corrosion resistant • Safe/Panic Rooms • Garage Doors • Interior & Entry Doors * UL Level 3 panel was fire tested as part of a wall system with steel studs and drywall facesheet