GUIDELINES FOR USING CESA CLEAN ADDITIVES • Cesa Clean works best when molded maintaining normal (injection) pressure/shear • For best results, Avient recommends a “Running Color Change” which eliminates breaks in the molding cycle • Since the Cesa Clean concentrate will expand, it is recommended to reduce the shot size by 20% • It is designed for use at a let-down ratio (LDR) of 3.0% or (33:1); however, use rate can vary depending on the severity of the contamination but typically is 2.0–4.0% (a use rate higher than 6.0% may not have any positive affect on the cleaning performance) • Using Cesa Clean as a routine part of your color change rotation will allow faster changes and consume a minimal amount of raw material - Note: If the manifold is not cleaned routinely, this process may be more time consuming and additional material will be required • It is best to process at your normal polymer processing temperatures - For best performance, stock temperature should be at least 400°F - If 400°F is achieved during the purging process, no additional activation will occur during the reprocessing of regrind - All parts produced during the “Running Purge Cycle” should be captured as regrind, resulting in a scrap-free color change - If using sequential gates, open and close all gates at the same time while purging the tool - If contamination appears to be coming from one gate, open and close first, and for an extended period of time, to force more material through this location - When cleaning in this manner, pay close attention to shot size - Parts containing the previous or new color plus any Cesa Clean can be used as regrind INTRODUCING CESA CLEAN TO YOUR PROCESS Hand Blend • Hand weigh enough of the Cesa Clean and natural resin mix to equate to 3–5 times the barrel capacity • Use rate should be 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • Note: Do not attempt to vacuum load more than 15 feet from source as stratification/separation may occur Volumetric Feeder • Calibrate feeder to dispense 3.0% or 33:1 for routine cleaning • For difficult-to-clean tooling, or tooling which is not routinely cleaned, start at 4.0% or 25:1 • This style of feeder is highly recommended for at-the-throat metering of Cesa Clean Blending Units Most blenders have an extra bin for an additive • Fill the additive bin with Cesa Clean • Set blender to introduce the Cesa Clean at 2.0 to 4.0% • Note: Do not air convey any further than 15 feet as Cesa Clean has a high density and may separate from the mix.

Avient Technical Service will order and deliver a 1L or 3L PlanetPak trial kit to your site. 3.

Scan your color standard using a spectrophotometer. 3.

To flip this PO into an invoice, click on “Create Invoice” 3.

Uranusweg 3 8938 AJ Leeuwarden The Netherlands +31(0) 58 216 75 99 info@fiber-line.com NOTICE: The information and data contained herein do not constitute sales specifications.

https://www.avient.com/company/policies-and-governance/code-conduct https://secure.ethicspoint.com/domain/media/en/gui/49178/index.html Avient Corporation 33587 Walker Road Avon Lake, OH 44012 3 Our Supply Chain At Avient, we commit to comply with laws and regulations supporting human rights such as the California Transparency in Supply Chains Act, the UK Modern Slavery Act, the Dodd-Frank Act requiring disclosures on conflict minerals, and the EU’s - Conflict Minerals Regulation.

ENGINEERED POLYMER SOLUTIONS - FEATURES & CHARACTERISTICS Resin Nymax™ Formulations Characteristics Applications PA6 GF 600 A 14 Natural 14% Glass Reinforced Stocks, Frames, Receivers, Handguards, Forearms, Picatinny Rails, Grips PA6 GF 600 A 33 Natural 33% Glass Reinforced, Heat Stabilized PA6 NM6000-0026 HI BK 33% Glass Reinforced, Toughened PA6 GF 600 A 60 UV Black 60% Glass Reinforced, Heat Stabilized PA6 GF 600 A 33 Black 28 V 33% Glass Reinforced, Heat Stabilized, UV PA6 1010 A Black 13 Super Toughened, Heat Stabilized PA6 1010 A Natural Super Toughened, Heat Stabilized PA6 NM6000-0027 ST Black Super Toughened PA6 NM6000-00013 HS UV Black 50% GF, High Flow PA6 PA66 NM6600-0018 HI HS 14 Nat 14% Glass Reinforced, Toughened, Heat Stabilized PA66 GF 1200 A 33 HS Black 22 33% Glass Reinforced, Heat Stabilized PA66 GF 1200 A 33 HS Natural 33% Glass Reinforced, Heat Stabilized PA66 NM6600-0019 HI HS 33 Nat 33% Glass Reinforced, Toughened, Heat Stabilized PA66 NM6600-0020 HI HS 43 Nat 43% Glass Reinforced, Heat Stabilized PA66 1200 A L Natural Unreinforced PA66 1200 A ZIP 22 Natural Unreinforced PA66 NM6600-0021 ST Black Super Toughened PA66 NM 1200 MT HS Black Toughened, Heat Stabilized PA66 NM 1200 MT HS Natural Toughened, Heat Stabilized Specialty Products Color Characteristics Applications Edgetek™ ET6200-0031 Black Black 20% Glass Reinforced PA12 Stocks, Frames, Receivers, Handguards, Forearms, Picatinny Rails, Bolt Carriers, Grips Gravi-Tech™ X GT 33991-05A-01-3 Copper 3sg, PA6, Copper Gravi-Tech™ X GT-30197-001-P4 Gray 4sg, PA610, Tungston Gravi-Tech™ GT 6400-0001 GRV 5.0 Black 5sg, PA610, Tungston Thermoplastic Elastomers Durometer OM Substrate Color Characteristics Applications OnFlex™ AF 7210 25-90A PP Black/Natural General Purpose with UV Stabilizer Grips, Recoil Pads, Gun Straps Dynaflex™ G7900 30-90A PP Black/Natural General Purpose Versaflex™ XP 2850 50A PP Natural Wet Grip Technology Versaflex™ VDT 4202-40 40A PP Black/Natural Vibration Damping Versaflex™ VDT 5120-40 40A PA Black/Natural Vibration Damping Versaflex™ OM6059-9 60A PA Black High Flow Versaflex™ OM6258 60A PA Black/Natural Enhanced Bond

Conduct an annual evaluation of the Committee’s performance. 3 Recommendations as to the Board.

to, implied warranties of merchantability and fitness for a particular purpose, with respect to samples or developmental material. 3. İddia edilen bir hak talebine ilişkin bir bildirimin tebliğ alınması üzerine, Satıcı tüm diğer teslimatları askıya alabilir. 3. The act of providing a sample or developmental material does not operate as permission, recommendation, or inducement to practice any 3 herhangi bir buluşun uygulanması için izin, öneri veya teşvik olarak işlev görmeyecektir.

We thank you for your understanding, and we look forward to serving your needs. 3 Table of contents A Message from our Global Quality Manager ...............................................................2 Avient Corporation: Overview ............................4 Avient Policy for Customer Audits ......................5 Management Responsibility ...............................6 Product Liability Insurance .............................6 Ethics - Code of Conduct.................................6 Modern Slavery Statement .............................6 Conflict Mineral Policy ....................................6 Technical Data Sheets.....................................6 Safety Data Sheets..........................................6 Regulatory Requests and Certificates (FDA certificate, Absence declaration, REACH, SDS) ........................................6 Safety Performance ........................................6 Environmental Performance...........................6 Energy Management ......................................6 Business Continuation Plan.............................6 Preventive - Predictive Maintenance..............6 Financial Report..............................................6 Quality Management..........................................7 3rd Party Certification ......................................7 Complaint Handling ........................................7 Continuous Improvement ...............................7 Traceability .....................................................7 Record Retention............................................7 IT Security.........................................................8 Firewall .........................................................8 Critical Data ..................................................8 IT Disaster Recovery .....................................8 IT Systems of Use Policy ...............................8 Annex 1 - Special dispositions related to ISO 13485 certification for Mevopur .......................9 Change control .............................................9 Validation .....................................................9 Control of documents and records ...............9 Supplier approval and supplier evaluation ...9 Traceability ...................................................9 Material management ..................................9 Release of finished products.........................9 Control of Non-conforming products, complaints handling, recall and CAPA..........9 Annex 2 – special dispositions related to ISO 22000 certification............................................10 Change..........................................................10 HACCP ..........................................................10 Control of documents and records ...............10 Material management ..................................10 Supplier approval and supplier evaluation ...10 Traceability ...................................................10 Release of finished products.........................10 Control of Non-conforming products, complaints handling, recall and CAPA..........10 4 Avient Corporation: Overview The Avient website is your home base for information about the company: http://www.avient.com/ To find our facility locations: http://www.avient.com/contact/global-directory-and-contacts For more information about our management systems certifications, including ISO, go to: http://www.avient.com/company/sustainability/environmental/global-iso-certificate-library Avient Governance (corporate policies and the Avient Code of Conduct): http://www.avient.com/investors/governance Financial reports: https://www.avient.com/investors Avient Sustainability Report: https://www.avient.com/company/sustainability http://www.avient.com/ http://www.avient.com/contact/global-directory-and-contacts http://www.avient.com/company/sustainability/environmental/global-iso-certificate-library http://www.avient.com/investors/governance https://www.avient.com/investors https://www.avient.com/company/sustainability 5 Avient Policy for Customer Audits Avient may permit audits of facilities, subject to:  Advanced notice and an audit agenda provided at least thirty (30) days in advance or as agreed by the Avient location to be audited for a routine audit The record retention period for these records is three (3) years.