A fresh look at material options helps align key properties with optimal performance for today’s vehicles.

KEY CHARACTERISTICS • UL 94 V-2, V-0, 5VA ratings and elevated RTI ratings • GWFI (IEC 60695-11-10) up to 960°C • Comparative Tracking Index (CTI) PLC 0, 600V ratings • Injection molding and extrusion grades • Non-halogen grades available • Low dielectric performance with selected formulations • Good recyclability • Colorable MARKETS & APPLICATIONS Applications that require flame retardant performance including: • Transportation: Interior components, seat components, door panels, aircraft interiors, railway interiors, boat interiors • Construction & Building Materials: Cable insulation, pipes and fittings, insulation materials • Consumer – Appliance casings, housings, covers, fume hoods, battery packages, furniture • Industrial Equipment: Machine housings • Energy, Electrical & Electronic, E-Mobility: Battery frames, electrical housings, connectors • Telecommunication: Cable management • Packaging: Transportation of sensitive goods • Healthcare: Medical device housings and components PRODUCT BULLETIN MAXXAM FR FLAME RETARDANT POLYOLEFIN FORMULATIONS Non-halogenated Halogenated PP Homopolymer Copolymer Homopolymer Copolymer Unit Unfilled Glass Fiber Mineral Unfilled Glass Fiber Mineral Unfilled Glass Fiber Mineral Unfilled Glass Fiber Mineral Characteristic Talcum Talcum Talcum Talcum Reinforcement Mass-% 0 5–30 5–30 0 20–30 5-20 0 5–30 5–20 0 5–30 5–20 Colorable – ++ ++ + ++ ++ + + + + + + + Density g/cm3 0,9–1,08 1,28–1,37 0,98–1,55 0,92–1,06 1,25–1,35 0,95–1,28 0,94–1,04 1,3–1,55 1,01–1,42 0,96–1,01 0,94–1,58 0,95–1,46 Tensile Strength MPa 25–30 30–70 25–35 16–22 40–65 15–25 25-–35 30–70 25–35 20–24 20–55 -25 E-Modulus (Tensile) MPa 1600–2500 2500–8200 2500–4000 800–1200 2000–8000 1600–3000 1300–2000 3000–8900 1900–3500 1000–1400 1200–7500 1500–3000 Izod Impact 23°C notched % 2,0–4,5 3,5–7,5 2,5–4,5 5–40 2,5–18 2,5–6 2,5–4,5 3,5–6,0 3,0–7,0 4,0–40 2,5–16 2,5–10 Max.

doku=Cegirat&key=2018/0821/C_r13081700006600001.es3&reqtip=arajanlat&FromSystem=IMOnline& mailto:laszlo.mednyanszky@polyone.com 59.

En del av de vanligaste intressekonflikterna kan uppkomma när du: • Deltar i aktiviteter som konkurrerar med, eller ser ut att konkurrera med, vårt bolags intressen • Tar emot någon finansiell förmån från, har ett finansiellt intresse i, arbetar åt, eller tillhandahåller tjänster till ett bolag som gör eller försöker göra affärer med oss eller en konkurrent • Låter dina affärsbeslut påverkas av, eller se ut att påverkas av, personliga eller familjeintressen eller vänskapsförhållanden – till exempel, när en firma som du eller en familjemedlem äger eller driver försöker göra affärer med Avient • Utför arbete utanför bolaget (inklusive att sitta i företagsstyrelser) som har negativt genomslag på ditt arbete eller stör ditt ansvar gentemot Avient • Använder bolagets egendom, information eller resurser för din personliga fördel eller till fördel för andra • Anställer, övervakar eller har en direkt eller indirekt rapport till en familjemedlem, inklusive svärföräldrar, eller någon som du har en romantisk relation med.

Properly designed deep undercuts however are possible with over-mold compounds if an advancing core is used when the mold opens and the part does not have sharp corners and the elastomer is allowed to deflect as it is ejected.

KEY CHARACTERISTICS The primary features and benefits of Gravi-Tech formulations are: • Customized density, offering a wide range of specific gravities from 1.5 to 11 gm/cm3 • Broad modulus range, from very flexible to very rigid grades • Corrosion resistance, withstanding oxidation for long-term use and benefit • Chemical resistance, withstanding fuels, oils and other harsh chemicals Additional features include: • Design flexibility and processing ease • Good impact strength • Elevated heat deflection temperature 6 Gravi-Tech Design Guide 7 CHAPTER 2 | PROCESS SETTINGS Density Modified Formulations Gravi-Tech™ polymer-metal composites are high-density materials developed as thermoplastic-based alternatives to lead and other traditional metals. End of Fill Part Length Dynamic Pressure Hydrostatic Pressure P ss Gate End Part FIGURE 61 - Deflection Equations H F WLMax Deflection: 0.002" (0.05mm) 1 = W • H3 12 _______ bending = F • L3 48 • E • I _______ k Vcoolant nmax, coolant • Pcoolant • Cp, coolant Dmin = k Vcoolant nmax, coolant • Pcoolant • Cp, coolant Dmin = k Vcoolant nmax, coolant • Pcoolant • Cp, coolant Dmin = FIGURE 60 - Pressure vs Part Length FIGURE 61 - Deflection equations FIGURE 62 - For Plate Shaped Parts FIGURE 63 - For Cylindrical Shaped Parts Design Guide 49 • MMoldings = Combined mass of molded parts • Cp = Specific Heat of the material Step 3 – Heat Removal Rate • Nlines = The total number of independent cooling lines there are in the mold • tc = The cooling time required by the part (Determined in step 1) Step 4 – Coolant Volumetric Flow Rate • ΔTMax,Coolant = Change in coolant Temperature During Molding (1°C) • ρCoolant = Density of coolant • CP = Specific heat of coolant Step 5 – Determine Cooling Line Diameter • ρCoolant = Density of coolant • VCoolant = Volumetric flow rate of coolant • μCoolant = Viscosity of coolant • ΔPline = Max pressure drop per line (Usually equals half of the pump capacity) • LLine = Length of the cooling lines COOLING LINE SPACING k Vcoolant nmax, coolant • Pcoolant • Cp, coolant Dmin = k Vcoolant nmax, coolant • Pcoolant • Cp, coolant Dmin = k Vcoolant nmax, coolant • Pcoolant • Cp, coolant Dmin = k Vcoolant nmax, coolant • Pcoolant • Cp, coolant Dmin = k Vcoolant nmax, coolant • Pcoolant • Cp, coolant Dmin = k Vcoolant nmax, coolant • Pcoolant • Cp, coolant Dmin = 2D < H < 5D H < W < 2H FIGURE 70 - Cooling Line Spacing FIGURE 64 - Heat Transfer Equation FIGURE 65 - Total Cooling for Mold FIGURE 66 - Cooling Required by Each Line FIGURE 68 - Max Diameter Equation FIGURE 69 - Min Diameter Equation FIGURE 67 - Volumetric Flow Rate Equation 50 Gravi-Tech ADHESIVE ADVANTAGES DISADVANTAGES Cyanoacrylate Rapid, one-part process Various viscosities Can be paired with primers for polyolefins Poor strength Low stress crack resistance Low chemical resistance Epoxy High strength Compatible with various substrates Tough Requires mixing Long cure time Limited pot life Exothermic Hot Melt Solvent-free High adhesion Different chemistries for different substrates High temp dispensing Poor high temp performance Poor metal adhesion Light Curing Acrylic Quick curing One component Good environmental resistance Oxygen sensitive Light source required Limited curing configurations Polyurethane High cohesive strength Impact and abrasion resistance Poor high heat performance Requires mixing Silicone Room temp curing Good adhesion Flexible Performs well in high temps Low cohesive strength Limited curing depth Solvent sensitive No-Mix Acrylic Good peel strength Fast cure Adhesion to variety of substrates Strong odor Exothermic Limited cure depth Design Guide 51 Bibliography 1.

Other key processing parameters are slow injection speeds and low back pressures. ** Avoid processing for a resin-rich surface.

Key: A = 4% Amosorb SolO2-2 + Fortis Amber-1 @ 0.09%; B = 50% Regrind A + 50% Virgin PET; C = 50% Regrind A + 50% Virgin PET + Fortis Amber @ 0.045% REGRIND COMBINATION STUDY - METHODOLOGY 1.844.4AVIENT www.avient.com Copyright © 2022, Avient Corporation.

Review and approve equity-based grants and awards, including long-term incentive plan awards, to officers, senior managers, key employees, and other employees of the Company and its subsidiaries under the Company’s equity-based plans

Ballistic Resistant Composite Panels PRODUCT SELECTION & INSTALLATION GUIDE KEY CHARACTERISTICS Military grade protection Ballistic resistant composite panels from Avient are constructed to provide military-grade protection from armed attackers for any facility.