PP LITE TEAL 564C Neusoft UR862A, 30% BaSO4, 144C Adds PP FR 8-6 LMS-1000

Purge thoroughly before and after use of this product with a low flow (0.5–2.5 MFR) PE or PP. DRYING CONDITIONS ENGLISH (°F) METRIC (°C) Temperature 180°F 80°C Duration 2–4 Hours Moisture Level Allowable 0.05%–0.20% PROCESSING Screw Speed Typical screw speeds are recommended Injection Velocity 1–3 inch per second Back Pressure Lower back pressure is recommended Pack Pressure 60–80% of max injection pressure Hold Pressure 40–60% of max injection pressure Cool Time 10–30 seconds (depends on part geometry and dimensional stability) Residence Time Longer residence times are not advised 1.844.4AVIENT www.avient.com Copyright © 2021, Avient Corporation.

Developed for advanced applications in transportation, these materials contain a minimum of 30% bio-based content, and are in current evaluations at several key automotive OEMs. Testing at Fraunhofer ICT Institute in Pfinztal, Germany has shown that a 40% filled reSound™ NF formulation has equivalent performance to a 30% filled short glass fiber reinforced alternative, at a 7-8% lower density.

When compared to alternatives during standard testing, these materials can help reduce carbon footprint over the product lifecycle, producing 61% less CO₂ than PA66, 46% less than PA6, and 30% less than POM. Grades are available with 30% - 50% long glass fiber, allowing customers to request customized performance requirements for certain applications.

Performance improvement: At the highest energy impacts, based on 7 to 9 mph for a large runner, Brooks testing shows the TPE-based system provides a 30-50 percent improvement in cushioning over traditional systems. Switching to Avient's GLS™ TPEs enabled Brooks to move to a single injection molding process, yielding a 30-40 percent reduction in energy usage and a projected savings of $80,000 to $100,000 annually. 

18-30 30-32

XCPE 30-2 D7 BLACK XCPE 30-2 D8 BLACK PP FR 8-6 LMS-1000

XRU-2897 FEP NP-30 HIGH BLUE XRU-2897 FEP NP-30 CC HIGH BLUE PP FR 8-6 LMS-1000

SPARROW 30 TPU SPARROW 30 TPU 3 PP FR 8-6 LMS-1000