CABLE MANUFACTURER A E R I A L D R O P C A B L E J A C K E T • Pass clamp test requested by end customer • Strong UV resistance & mechanical performance • Excellent processing • Good fire performance to pass CPR class Cca / Dca • Low shrinkage (< 1%) • Exceeded material fire performance requirements and met all other performance criteria • Simplified supply chain with local manufacture in Europe • Enabled customer to run material at optimum processing conditions by providing support with machine set up ECCOH™ 5978 UV Formulation KEY REQUIREMENTS WHY AVIENT?

SURGICAL DEVICE MANUFACTURER H A N D L E H O U S I N G F O R L A P A R O S C O P I C S E A L E R • Excellent adhesion onto PC/ABS • Good aesthetics with soft touch • RoHS, REACH and FDA compliant • Enhanced ergonomics and functionality with improved soft grip • Met performance requirements for wear resistance and colorability • Customized a thermoplastic elastomer (TPE) solution and had with a faster sample response speed than competitor Versaflex™ Overmolding Formulation KEY REQUIREMENTS WHY AVIENT?

Page 1 of 4 https://abs.ez2xs.com https://abs.ez2xs.com A B S Q u al ity E va lu at io n s C er tif ic at io n E ISO 9001:2015 Certificate Of Conformance ANNEX Certificate No.: 31307 Avient Corporation At the below facilities FACILITY NAME FACILITY ACTIVITY ADDRESS Avient - Birmingham Manufacturing The Manufacture of Pultruded and Filament wound components Pultrusion and CRTM 3943, Valley East Industrial Drive, Buildings 1,2,3,4 Birmingham - AL 35217 United States Avient - Birmingham Manufacturing The Manufacture of Pultruded and Filament wound components Pultrusion and Filament Wound Tubing 3968, Valley East Industrial Drive, Building 5 Birmingham - AL 35217 United States Avient - Birmingham Manufacturing The Manufacture of Pultruded and Filament wound components Pultrusion 3950, Valley East Industrial Drive, Building 6 Birmingham - AL 3517 United States Avient Corporation Management of QMS. Page 2 of 4 https://abs.ez2xs.com https://abs.ez2xs.com A B S Q u al ity E va lu at io n s C er tif ic at io n E Avient Corporation - Cergy, France Design and Manufacture of Color and Additive Concentrates and Specialty Compounds , 14 Avenue de l'Eguillette Saint Ouen l'Aumône - 95310 France Avient Corporation - Esenyurt, Turkey Design and Manufacture of Specialty Engineered Thermoplastics Orhangazi Mah. 1683 Sok. Page 3 of 4 https://abs.ez2xs.com https://abs.ez2xs.com A B S Q u al ity E va lu at io n s C er tif ic at io n E Avient Corporation - Mountain Top, PA Manufacturing, Shipping and Receiving , 855 Oak Hill Road Mountain Top - PA 18707 United States Avient Corporation - Oricain (Pamplona), Spain Design and Manufacture of Color and Additive Concentrates and Specialty Compounds Pol.

HOME | Contents | Message from the CEO | Who We Are | People | Products | Planet | Performance | Goals & Metrics | Indices Sustainability Report | 2019 36 https://www.greatplacetowork.com P R O D U C T S HOME | Contents | Message from the CEO | Who We Are | People | Products | Planet | Performance | Goals & Metrics | Indices Sustainability Report | 2019 37 Innovation: The Lifeblood of a Specialty Organization Innovation is the lifeblood of any specialty company. Our latest grades offer up to 50% lower haze and reduced impact on the PET recycle stream compared to previous grades. The new 4020G grade offers up to 50 percent lower haze and reduced impact on the PET recycle stream compared to previous grades, while maintaining the same reliable active oxygen scavenging performance.

HOME | Contents | Message from the CEO | Who We Are | People | Products | Planet | Performance | Goals & Metrics | Indices Sustainability Report | 2019 36 https://www.greatplacetowork.com P R O D U C T S HOME | Contents | Message from the CEO | Who We Are | People | Products | Planet | Performance | Goals & Metrics | Indices Sustainability Report | 2019 37 Innovation: The Lifeblood of a Specialty Organization Innovation is the lifeblood of any specialty company. Our latest grades offer up to 50% lower haze and reduced impact on the PET recycle stream compared to previous grades. The new 4020G grade offers up to 50 percent lower haze and reduced impact on the PET recycle stream compared to previous grades, while maintaining the same reliable active oxygen scavenging performance.

Matrix Resin Fiber Reinforcement Fiber Content, by Weight (%) Epoxy E-CR or E-Glass >70% MATERIAL TECHNICAL DATA Property Test Procedure Rod Diameter 1.25 in (31.75 mm) 1.50 in (38.10 mm) Glass Transition Temp (Tg) ASTM 1356 100°C Minimum 100°C Minimum Water Absorption 24 hours at 50°C (122°F) ASTM D570 0.03% 0.03% Short Beam Strength (ILSS) ASTM 2344 8,400 psi (58 MPa) 9,200 psi (64 MPa) Transverse Shear Strength ASTM 7617 23,400 psi (160 MPa) 24,640 psi (170 MPa) Traceability Lot number shall be clearly marked on each package/shipment.

PRODUCT BULLETIN PROPERTY TEST METHOD TYPICAL VALUE (ENGLISH) TYPICAL VALUE (SI) Specific Gravity ASTM D-792 11.0 11.0 Tensile Modulus1 ASTM D-638 1.20E+6 psi 8270 MPa Tensile Strength1 (Yield) ASTM D-638 3,950 psi 27.2 MPa Flexural Modulus ASTM D-790 800,000 psi 5520 MPa Flexural Strength ASTM D-790 7,000 psi 48.3 MPa Notched Izod Impact2 ASTM D-256A 2.1 ft•lb/in 110 J/m Deflection Temperature Under Load 66 psi (0.45 MPa), Unannealed, 0.250 in (6.35mm) ASTM D-648 280°F 138°C Deflection Temperature Under Load 264 psi (1.8 MPa), Unannealed, 0.250 in (6.35mm) ASTM D-648 190°F 87.8°C TECHNICAL PROPERTIES 1 Type I, 0.20 in/min (5.1 mm/min) 2 73°F (23°C), 0.125 in (3.18 mm), Injection molded www.avient.com Copyright © 2020, Avient Corporation.

ONFLEX™ LO 7120-45 ONFLEX™ HT 40A-3S2131 BERGAFLEX™ BFIG 45A-300 Applications HVAC Seals HVAC Seals HVAC Seals Interior - direct airflow Interior & exterior Interior - direct airflow HVAC feature Low VOC/FOG & odor Low VOC/FOG & odor Low odor Cold air Hot air Cold air VDA 270 ≤3.0 ≤3.0 ≤3.0 VOC/FOG VDA 278 (VOC) 97µg/g 100µg/g 196µg/g VDA 278 (FOG) 1131µg/g 1116µg/g 1707µg/g DIN 75201 (FOG) 0.3mg 1.7mg 1.1mg 73°F (23°C) 72 hrs 15% 12% 15% 158°F (70°C) 22 hrs 45% 28% 50% 212°F (100°C) 22 hrs 70% 45% 90% Density 1.15 g/ml 1.00 g/ml 1.17 g/ml Processing Injection Molding Injection Molding/ Extrusion Injection Molding Bonds to Polypropylene Polypropylene/ Polyethylene Polypropylene Hardness range 35–65 Shore A 40–70 Shore A 35–65 Shore A HOW GLS TPEs MAKE THE DIFFERENCE IN AUTOMOTIVE HVAC APPLICATIONS • Low VOC/FOG – externally tested to VDA 278 and shows significant reductions in volatile organic compounds and fogging when compared to current TPE technologies • Industry standards – helps to achieve VOC/ FOG performance standards for improved VIAQ • Reduced manufacturing steps – does not require pre-drying or post heating to reduce VOC in parts produced • Design optimization – color can be added at the machine • Easy to process – can be extruded, injection molded and extrusion blow molded • Recyclable – Our automotive TPEs are compatible with most municipal recycle streams • Global support – Avient automotive TPEs can be manufactured in locations that are convenient to your operations, including North America, Europe or China To learn more about GLS TPEs for automotive applications, contact Avient at +1.844.4AVIENT (+1.844.428.4368).

Key Features • Excellent heat & flame resistance • High chemical resistance • Low thermal shrinkage • Self-extinguishing flame retardant properties • Soft-hand yields good textile properties Disadvantages • Low tenacity • Low modulus FIBER-LINE® PROCESS FOR NOMEX® META-ARAMID • Coating • Twisting • Precision Winding FIBER-LINE® NOMEX® PRODUCTS • Packing Yarn • Wire Harness Yarn • Industrial Fabric Yarn Property UOM Value Breaking Tenacity g/d 5.0 Specific Gravity Ratio 1.38 Elongation @ Break % 30.0 Tensile Modulus g/d 125 Moisture Regain* % 4.5 Creep** % N/A Shrinkage*** % .4 Melt Point °C None Decomposition Temp. °C TBD Meta-Aramid Properties CHEMICAL COMPATIBILITY Chemical Resistance to Acid: Strength loss in H2SO4 below acid dew point. NOMEX® META-ARAMID DATA META-ARAMID (HM) BARE FIBER PERFORMANCE * Equilibrium moisture regain @ 55% RH ** Creep @ 40%-58% ultimate tensile strength *** Shrinkage in dry air @ 177 C for 30 minutes MOVING HIGH PERFORMANCE FIBERS FORWARD ABOUT FIBER-LINE® LOCATIONS Headquarters, R&D, Manufacturing FIBER-LINE® LLC 3050 Campus Drive Hatfield, PA 19440 +1 215.997.9181 fiber@fiber-line.com Manufacturing Operations FIBER-LINE® LLC 280 Performance Drive SE Hickory, NC 28602 +1 828.326.8700 fiber@fiber-line.com EMEA & Asia Pacific Operations FIBER-LINE® INTERNATIONAL B.V.

Abrasion Resistance Ultraviolet (UV) Resistance Flame Resistance Chemical Resistance (Acid Chemical Resistance (Alkali) Chemical Resistance (Organic Solvent) Strength Retention (H2O) O P P P P P P Property UOM Value Breaking Tenacity g/d 1.5 Specific Gravity Ratio 1.27 Elongation @ Break % 30.0 - 40.0 Tensile Modulus g/d 2.5 - 5.0 Moisture Regain* % 6.0 Creep** % N/A Shrinkage*** % < 0.1 Melt Point °C N/A Decomposition Temp. °C > 150 NOVOLOID NOVOLOID DATA Standard Modulus * Equilibrium moisture regain @ 55% RH ** Creep @ 40%-58% ultimate tensile strength *** Shrinkage in dry air @ 177 C for 30 minutes CHEMICAL COMPATIBILITY Chemical Resistance to Acid: Degrades in concentrated or hot Nitric and Sulfuric acid.